Professional Documents
Culture Documents
How To Repair Dead DM500S With JTAG
How To Repair Dead DM500S With JTAG
1. Hardware Connection
LPT--------------------------DM500
2---------100 ohms---------11 ( HALT)
3---------100 ohms---------9 (TMS)
4---------100 ohms---------7 (TCK)
5---------100 ohms---------3 (TDI)
11--------100 ohms---------1 (TDO)
25 ----------------------------16 (GND)
2. Connect the LPT MALE port to your PC, and then power on the DM500S.
3. In the Start - Run menu, execute cmd.
5. Several minutes later, the bootloader will be written into the FLASH memory successfully.
6. Power off the DM500S, and remove the LPT MALE port from your PC. Then you can transfer
an image to DM500S with DreamUp.
You can change the MAC address of your working DM500S with JTAG and JtagDm500.exe.