Professional Documents
Culture Documents
Ingun Zub Sam en PDF
Ingun Zub Sam en PDF
DER PRF
STING S
TE
TIONS
LU
IN
CHNIK IN
TE
Catalogue 1.1
16 mm stroke,
150 N contact force
d
lle
tro
on d
e-c te
ok pera
o AM
S
str
14 mm stroke,
300 N contact force,
single Euro-format
manually
operated
SAM
Part No. 12306
14 mm stroke,
300 N contact force,
double Euro-format
pn
eu
op mat
er ic
SA ate ally
M d
50 mm stroke,
68 N contact force
SAM-H
stroke-controlled
Side approach mechanism (SAM) are designed for the testing industry i.e. for testing
electrical components where lateral contacting in the form of a horizontally guided
stroke action is necessary. The contacting stroke can be generated in three different
ways: stroke-controlled (SAM-H), manually (SAM-M) or pneumatically (SAM-P).
Determinant features
activation lever
manually
SAM-M
housing
housing
stroke bar
activation tappet
stroke bar
SAM-P
pneumatically
Conformity
Our pneumatically operated side approach mechanism
are regarded as unfinished machines and comply with
the definition of the directive 2006/42/EG.
SAM-H
Stroke-controlled operated side approach mechanism
with 16 mm stroke and 150 N contact force
Ordering information:
Technical information:
SAM-H
stroke-controlled
40
60
series:
max. contact force:
max. contact stroke:
contact stroke generation:
max. activation stroke:
max. lever arm length (s):
torque:
operating temp. range:
outside dimension:
weight:
SAM-H
150 N (with centre load)
16 mm
stroke-controlled
7 mm
60 mm
1,5 Nm
-5 C to +60 C
approx. 20 x 60 x 40 mm (w x d x h)
approx. 0,14 kg
20
Operation:
The activation is carried out stroke-controlled due to the conversion of
the vertical stroke action of the test fixture (activation stroke) into a
horizontally guided stroke action of the stroke bar of the side approach
mechanism (contact stroke). The max. contact stroke is designed for 16
mm with an activation stroke of 7 mm.
outside dimension
Mounting:
Our mounting drawings show the correct mounting. Please use the
45680 mounting drawing for the mounting of the side approach
mechanism Part No. 45680.
Additional features:
operation in vacuum test fixtures possible
permitted load
side approach
mechanism
contact bar
16
stroke
stroke direction
lever arm
s [mm]
test probes
unit under test (UUT)
contact bar
16
stroke
stroke direction
lever arm
s [mm]
unit under
test (UUT)
test probes
SAM-M
Manually operated side approach mechanism
with 20 mm stroke and 150 N contact force
Ordering information:
Technical information:
40
series:
max. contact force:
max. contact stroke:
contact stroke generation:
check contact stroke:
max. lever arm length (s):
torque:
operating temp. range:
outside dimension:
weight:
SAM-M
150 N (with centre load)
20 mm
manual
proximity switch (optionally available)
60 mm
1,5 Nm
-5 C to +60 C
approx. 70 x 63 x 40 mm (w x d x h)
approx. 0,41 kg
Operation:
Activation is carried out manually turning the activation lever approx.
90 clockwise. The final position of the stroke mechanism is given via
an optionally available proximity switch. After activation the stroke
mechanism remains in a stable final position.
63
70
outside dimension
manually
SAM-M
Mounting:
Our mounting drawings show the correct mounting. Please use the
41070 mounting drawing for the mounting of the side approach
mechanism Part No. 41070.
Recommended accessories:
permitted load
side approach
mechanism
contact bar
20
stroke
stroke direction
lever arm
s [mm]
test probes
measuring principle:
switching element:
rated operating voltage range:
max. output current:
electrical connection:
magnetic Reed
closer
12 to 30 V (DC and AC)
500 mA
cable (3 wires)
unit under
test (UUT)
Part No.: 45790
SAM-M
Manually operated side approach mechanism with 14 mm
stroke and 300 N contact force in single Euro-format
Ordering information:
Technical information:
85
series:
max. contact force:
max. contact stroke:
contact stroke generation:
check contact stroke:
max. lever arm length (s):
torque:
operating temp. range:
outside dimension:
weight:
SAM-M
300 N (with centre load)
14 mm
manual
micro switch (closer)
170 mm
2,1 Nm
-5 C to +60 C
approx. 202 x 145 x 85 mm (w x d x h)
approx. 0,78 kg
145
202
Operation:
Activation is carried out manually turning the activation lever approx.
90 clockwise. The final position of the stroke mechanism is given via an
included micro switch (closer). After activation the stroke mechanism
remains in stable final position.
outside dimension
350
Mounting:
Our mounting drawings show the correct mounting. Please use the
12306 mounting drawing for the mounting of the side approach
mechanism Part No. 12306.
manually
SAM-M
300
250
200
Additional features:
quick exchangeable via two knurled-head screws
mounting of one VG-strip (DIN 41612) possible
150
100
50
0
25
50
permitted load
contact bar
side approach
mechanism
Recommended accessories:
14
stroke
stroke direction
unit under
test (UUT)
type:
version:
post length:
rated current:
grid:
loaded rows:
C
straight
13 mm
2A
2,54 mm
a/c (64-pole) or a/b/c (96-pole)
lever arm
s [mm]
test probes
SAM-M
Manually operated side approach mechanism with 14 mm
stroke and 300 N contact force in double Euro-format
Ordering information:
Technical information:
85
145
series:
max. contact force:
max. contact stroke:
contact stroke generation:
check contact stroke:
max. lever arm length (s):
torque:
operating temp. range:
outside dimension:
weight:
SAM-M
300 N (with centre load)
14 mm
manual
micro switch (closer)
200 mm
3,0 Nm
-5 C to +60 C
approx. 268 x 145 x 85 mm (w x d x h)
approx. 0,85 kg
268
Operation:
Activation is carried out manually turning the activation lever approx.
90 clockwise. The final position of the stroke mechanism is given via an
included micro switch (closer). After activation the stroke mechanism
remains in stable final position.
outside dimension
350
manually
250
SAM-M
Mounting:
Our mounting drawings show the correct mounting. Please use the
12559 mounting drawing for the mounting of the side approach
mechanism Part No. 12559.
300
200
Additional features:
quick exchangeable via two knurled-head screws
mounting of two VG-strips (DIN 41612) possible
150
100
50
0
30
60
permitted load
contact bar
side approach
mechanism
Recommended accessories:
14
stroke
stroke direction
type:
version:
post length:
rated current:
grid:
loaded rows:
C
straight
13 mm
2A
2,54 mm
a/c (64-pole) or a/b/c (96-pole)
lever arm
s [mm]
unit under
test (UUT)
test probes
SAM-P
Pneumatically operated side approach mechanism
with 50 mm stroke and 68 N contact force
Ordering information:
Technical information:
28
105
82
series:
max. contact force:
max. contact stroke:
contact stroke generation:
check contact stroke:
max. lever arm length (s):
torque:
operating pressure:
compressed air connection:
operating temp. range:
outside dimension:
weight:
SAM-P
68 N (with centre load)
50 mm
pneumatic
proximity switch (optionally available)
120 mm
2,0 Nm
6 bar
QS-4
-5 C to +60 C
approx. 82 x 105 x 28 mm (w x d x h)
approx. 0,58 kg
outside dimension
Operation:
Activation is carried out pneumatically via compressed air to the stroke
cylinder. The final position of the stroke mechanism is given via an
optionally available proximity switch. After switching off the compressed
air, the side approach mechanism sets back.
140
120
Mounting:
Our mounting drawings show the correct mounting. Please use the
50140 mounting drawing for the mounting of the side approach
mechanism Part No. 50140.
100
80
60
40
CE-Conformity (2006/42/EG):
unfinished machine
20
0
20
40
60
permitted load
Recommended accessories:
contact bar
pneumatically
side approach
mechanism
50
stroke
SAM-P
lever
arm
s [mm]
test probes
SAM
Side approach mechanism
Lifespan
To determine the lifespan of our side approach mechanism, life cycle tests
with fully automatic, computerised test standards are carried out. Thus we
ensure long-term high quality and performance of our products.
We have successfully completed the latest life cycle tests under laboratory
conditions on our side approach mechanism after approx. 300.000 cycles
without detecting wear and tear which would limit the function of the
side approach mechanism.
As the lifespan depends on various incalculable factors, especially largely
on individual testing use we cant provide any guarantees regarding the
actual life cycle determined by the laboratory.
Application examples
With our side approach mechanism we offer diversely applicable function
units for the lateral contacting of electronic components which can be
assembled individually matching the respective testing demand.
SAM-H
SAM-M
SAM-M
SAM-P
Product description
The structured and logical constellation of the individual numbers, the
ordering index, allows clear identification and classification of our side
approach mechanism.
SAM
product group
SAM
SAM =
side approach
mechanism
H7
drive
16
stroke
Hx
H=
stroke-controlled
drive
x = activation
stroke [mm]
M=
manual drive
P=
pneumatic drive
E=
electrical drive
XX
150N
contact force
XX =
max. stroke
[mm]
XXXN
XXX =
max. contact force
[N]
020
width
XXX
060
depth
XXX =
width [mm]
(decimal places
rounded up)
XXX
S
version
XXX =
depth [mm]
(decimal places
rounded up)
quick stroke
SAM
Side approach mechanism overview
Product group
SAM
SAM
SAM
Series
SAM-H
SAM-M
SAM-M
Product name
SAM-H7-16-150N-020-060-S
SAM-M-20-150N-070-063
SAM-M-14-300N-202-145
45680
41070
12306
150 N
150 N
300 N
16 mm
20 mm
14 mm
stroke-controlled
manual
manual
---
proximity switch *
7 mm
---
---
60 mm
60 mm
170 mm
Torque
1,5 Nm
1,5 Nm
2,1 Nm
Operating pressure
---
---
---
---
---
---
-5 C to +60 C
-5 C to +60 C
-5 C to +60 C
Outside dimension (w x d x h )
approx. 20 x 60 x 40 mm
approx. 70 x 63 x 40 mm
Weight
approx. 0,14 kg
approx. 0,41 kg
approx. 0,78 kg
Recommended accessories
---
(see page 5)
(see page 6)
CE-Conformity (2006/42/EG)
---
---
---
Permitted loads
350
SAM (Part No. 12559)
SAM (Part No. 12306)
SAM (Part No. 50140)
SAM (Part No. 45680, Part No. 41070)
300
250
200
150
100
50
0
30
60
10
Product finder
SAM
SAM
SAM-M
SAM-P
SAM-M-14-300N-268-145
SAM-P-50-068N-082-105
12559
50140
300 N
68 N
14 mm
50 mm
manual
pneumatic
proximity switch *
---
---
200 mm
120 mm
3,0 Nm
2,0 Nm
---
6 bar
---
QS-4
-5 C to +60 C
-5 C to +60 C
approx. 82 x 105 x 28 mm
approx. 0,85 kg
approx. 0,58 kg
(see page 7)
(see page 8)
---
unfinished machine
Product name
Female connector 64-pole
Female connector 96-pole
Male connector 64-pole
Male connector 96-pole
Proximity switch
SAM-H7-16-150N-020-060-S
SAM-M-14-300N-202-145
SAM-M-14-300N-268-145
SAM-M-20-150N-070-063
SAM-P-50-068N-082-105
Set check contact stroke
Set valve assembly
Part No.
8256
8257
4864
5195
25638
45680
12306
12559
41070
50140
45790
42702
Page
6, 7
6, 7
6, 7
6, 7
8
4
6
7
5
8
5
8
More by INGUN
Do you need test fixtures:
for testing low, mixed or high volumes
with different usable areas
with different contact forces
with special test system interface
for testing higher voltage
we recommend the manual test fixture series
MA xx0-series
(low volume)
MA 21xx-series (mixed volume)
MA 32xx-series (high volume)
You will find further information about the secure and intended
use of the INGUN side approach mechanism in the respective
operating instructions.
Please contact us for further information. Prices and delivery
time on request.
MA 2112/D/H/S-7/Pylon
MA 360
11
Test Probes
and
Test Fixtures
by
INGUN
Headquarters
INGUN Germany
Subsidiaries
INGUN Benelux
INGUN China
INGUN India
INGUN Korea
INGUN Mexico
INGUN Espaa
INGUN Switzerland
INGUN UK
INGUN USA
Europe
Austria
Benelux
Bosnia-Herzegovina
Croatia
Czech Republic
Denmark
Estonia
Finland
France
Germany
Hungary
Italy
Norway
Poland
Portugal
Romania
Serbia
Slovenia
Slovak Republic
Spain
Sweden
Switzerland
Turkey
United Kingdom
Asia
China
Hongkong
India
Israel
Japan
Korea
Malaysia
Taiwan
Thailand
Vietnam
Africa
South Afirca
Tunesia
Australia
Australia
New Zealand
America
Argentinia
Brazil
Canada
Mexico
USA