Each category of networking cable has different specifications like Cat-5 cabling support frequencies of up to 100 MHz and speeds of up to 100 Mbps, CAT5e cabling supports frequencies of up to 350 MHz and speeds of up to 1000 Mbps and Cat-6 cabling supports frequencies of up to 250 MHz and speeds of up to 1000 Mbit/s. For more info visit www.cables.com
Each category of networking cable has different specifications like Cat-5 cabling support frequencies of up to 100 MHz and speeds of up to 100 Mbps, CAT5e cabling supports frequencies of up to 350 MHz and speeds of up to 1000 Mbps and Cat-6 cabling supports frequencies of up to 250 MHz and speeds of up to 1000 Mbit/s. For more info visit www.cables.com
Each category of networking cable has different specifications like Cat-5 cabling support frequencies of up to 100 MHz and speeds of up to 100 Mbps, CAT5e cabling supports frequencies of up to 350 MHz and speeds of up to 1000 Mbps and Cat-6 cabling supports frequencies of up to 250 MHz and speeds of up to 1000 Mbit/s. For more info visit www.cables.com
Each category of networking cable has different specifications like Cat-5 cabling support frequencies of up to 100 MHz and speeds of up to 100 Mbps, CAT5e cabling supports frequencies of up to 350 MHz and speeds of up to 1000 Mbps and Cat-6 cabling supports frequencies of up to 250 MHz and speeds of up to 1000 Mbit/s. For more info visit www.cables.com
Crossover Network Cables vs Straight Through Cable
Straight Through Cables
Crossover Cables
This means that both
ends of the cables will be identical. The color of smaller cables inside the Ethernet cable, will be in the same order, from left to right.
A crossover Ethernet cable
have a different look on either side of the cable. The purpose of the crossover cable, is to connect one device directly to another device, without a switch or hub being present.
This type of cable is used
for connecting a PC to a hub/switch or for connecting a router to a switch.
So if you were connecting
one PC directly with another PC, you would then use a crossover network cable.
CAT 5 Network Cable
Specifications of the Cat 5 Cable
Cat-5 cabling support frequencies of up to 100 MHz and speeds of up to 100 Mbps (megabytes per second). The Cat-5 Cable is unshielded wire containing four pairs of 24-gauge twisted copper pairs, terminating in an RJ-45 jack. Cat5 and Cat5e LAN cables are easy to use, most popular and the most common, so it is very probable that if you are using an Ethernet cable it is a Cat 5 cable. However, for the majority Cat5e cables are the commonly used, as these have fixed a few little issues that came along with the Cat5 cable. Cat5e cables also support the faster speeds of 1000Mbit (or Gigabit) connections.
CAT 5e Network Cable
Specifications of the Cat 5 Ethernet Cable
CAT5e cabling supports frequencies of up to 350 MHz and speeds of up to 1000 Mbps (one gigabyte per second). The Cat-5e Cable is unshielded wire containing four pairs of 24-gauge twisted copper pairs, terminating in an RJ-45 jack. CAT5e cables are the most common and popular Ethernet cables being used. Cat5e cable sort out issues that came along with the Cat5 Cable. Cat5e cables also support the faster speeds of 1000Mbit (or Gigabit) connections.
CAT 6 Network Cable
Specifications of the Cat 6 Cable
Cat-6 cabling supports frequencies of up to 250 MHz and speeds of up to 1000 Mbit/s. This is a big improvement on previous network cabling speeds (CAT 3: 10 MHz, CAT 5: 100Mhz). Cat 6a cables can perform up to speeds of 500 Mhz. CAT6 cables are becoming progressively more popular, especially with their capabilities of performing at Gigabit Speeds. However, Cat 5e cables are still the most used and most popular network cable.