marking, Typ aa \___
4.5m min
we
Curb with gutter
8 specified, Typ
Through street
DOUBLE RAMP WITHOUT BOULEVARD RAMPS WITH BOULEVARD
Expansion
joint. Typ
The plates sholl extend the entire width of
the sidewalk ramp ata minimum length of
610mm, in accordance with OPSD 310.039
Dropped curb with
gutter as. specitied : RAMP ELEVATION
Ramp = 2.0m min / 1.2m min
750=
1170200 __siope 2% to 2.5%
integral with ramp,
Note 4
Finished road
surface
Expansion joint en
mateo We
Teste waking surace
200mm min ing surf
indiestor, OPSD 310059 Pay SECTION
200mm min, Note 6 Sidewalk Romp
INOTES:
1 Slope of ramp shall not exceed 8%.
2 Cross slope of ramp shall not exceed 2% in either direction.
3 Cross slope of flared side of ramp shall not exceed 8%.
4 Dropped curb at ramp shall be modified to eliminate 30 mm step at gutter line
5 Minimum thickness of ramp is 200mm. Minimum thickness of sidewalk and flared sides
adjacent to ramp is 150mm.
A All dimensions are in millimetres unless otherwise shown.
ONTARIO PROVINCIAL STANDARD DRAWING. [ Nov 2015 [Rev] 0]
CONCRETE SIDEWALK RAMPS AT
OPSD_310.033
UNSIGNALIZED INTERSECTIONS