Professional Documents
Culture Documents
Comba Product Catalog 2012
Comba Product Catalog 2012
Product Catalog
800/900/1800/1900/2000 V-Pol.........................11
800/900 X-Pol....................................................15
1800/1900/2000/2600 X-Pol.........................................28
800/900-1800/1900/2000/2600 XX-Pol.....................................................37
800/900-1800/1900/2000/2600 XXX-Pol.................................51
800/900-1800/1900/2000/2600 XXXX-Pol...................56
B. Repeater/Microcell Antenna..................57
C. Indoor Antenna............................................................................................................64
D. RET System.................................................................................................................70
E. RF Products...............................................................................................................75
www.comba-telecom.com
You may print copies of the information on this paper for your personal use and store the files on your
computer for personal use. You may not distribute text or graphics to others without the express written
consent of Comba Telecom Limited and Comba affiliates. Also, you may not, without our permission, copy
and distribute this information on any other server, or modify or reuse text or graphics on this or any another
system.
No reproduction of any part of the paper may be sold or distributed for commercial gain, nor shall it be
modified or incorporated in any other work, publication or site, whether in hard copy or electronic format,
including postings to any other site. Comba Telecom Limited reserves all other rights.
The information on this paper has been included in good faith and is for general purposes only. It should not
be relied upon for any specific purpose and no representation or warranty is given as regards its accuracy or
completeness.
No information on this paper shall constitute an invitation to invest in Comba Telecom Limited or any of
its affiliates. Neither Comba Telecom Limited and Comba affiliates, nor their or their affiliates' officers,
employees or agents shall be liable for any loss, damage or expense arising out of any access to or use
of this paper or any site linked to it, including, without limitation, any loss of profit, indirect, incidental or
consequential loss.
www.comba-telecom.com
www.comba-telecom.com
www.comba-telecom.com
H-HPBW
Pol.
()
Gain (dBi)
Electrical tilt
Launch
()
Time
Page
1) 800/900/1800/1900/2000 V-Pol
ODP-065V17BXX
806-960
65
V-Pol
17.2
FET (0,6)
Available
11
ODP-065V18Bxx
806-960
65
V-Pol
18.2
FET (0,6)
Available
12
ODP-090V17Bxx
806-960
90
V-Pol
17.0
FET (0,6)
Available
13
ODP-065V18Kxx
1710-2170
65
V-Pol
18.0
FET (0,6)
Available
14
ODP-065R15Bxx
806-960
65
X-Pol
15.1
FET (0,6)
Available
15
ODP-065R17Bxx
806-960
65
X-Pol
17.1
FET (0,6)
Available
16
ODP-065R18Bxx
806-960
65
X-Pol
18.0
FET (0,6)
Available
17
ODP-065R18EXX(JS)
790-960
65
X-Pol
18.0
FET (0,6)
Available
18
ODP-090R17Bxx
806-960
90
X-Pol
17.1
FET (0,6)
Available
19
ODV-032R20E-G
790-960
32
X-Pol
19.3
VET(0-10)
2013 Q1
20
ODV-065R15E-G
790-960
65
X-Pol
15.2
VET(0-20)
2013 Q1
21
ODV-065R17E-G
790-960
65
X-Pol
16.6
VET(0-10)
2013 Q1
22
ODV-065R18E-G
790-960
65
X-Pol
17.5
VET(0-12)
2013 Q1
23
ODV-065R15B
806-960
65
X-Pol
15.5
VET (0-14)
Available
24
ODV-065R17B
806-960
65
X-Pol
17.0
VET (0-10)
Available
25
ODV-065R18B
806-960
65
X-Pol
17.6
VET (0-8)
Available
26
ODV-090R17E-G
790-960
90
X-Pol
16.5
VET (0-12)
2013 Q1
27
2) 800/900 X-Pol
3) 1800/1900/2000/2600 X-Pol
ODP-065R15Kxx-G
1710-2170
65
X-Pol
15.3
FET (0,6)
Available
28
ODP-065R18Kxx-G
1710-2170
65
X-Pol
18.0
FET (0,6)
Available
29
ODV-032R21K-G
1710-2170
32
X-Pol
20.8
VET (0-10)
Available
30
ODV-065R15K-G
1710-2170
65
X-Pol
15.3
VET (0-20)
2013 Q1
31
ODV-065R18K-G
1710-2170
65
X-Pol
18.0
VET (0-10)
Available
32
ODV-065R18K
1710-2170
65
X-Pol
18.0
VET (0-10)
Available
33
ODV-065R18J-G
1710-2690
65
X-Pol
18.0
VET (0-12)
2013 Q1
34
ODV-065R18J
1710-2690
65
X-Pol
18.0
VET (0-12)
Available
35
ODV-090R17K-G
1710-2170
90
X-Pol
16.5
VET (0-10)
2013 Q1
36
806-960/1710-2170
65
XX-Pol
16.7/17.5
FET (0,6)
Available
37
790-960/1710-2170
65
XX-Pol
14.0/16.8
VET
2013 Q1
4) 800/900-1800/1900/2000/2600 XX-Pol
ODP-065R17B18Kxxyy
ODV-065R14E17K-G
ODV-065R15E18K-G
ODV-065R17E18K-G
ODV-065R17E18K
ODV-065R18EK-G
(0-20/0-10)
790-960/1710-2170
XX-Pol
65
15.0/17.7
VET
38
2013 Q1
39
Available
40
Available
41
2013 Q1
42
(0-20/0-10)
790-960/1710-2170
XX-Pol
65
16.7/17.7
VET
(0-10/0-10)
790-960/1710-2170
XX-Pol
65
16.7/17.7
VET
(0-10/0-10)
790-960/1710-2170
XX-Pol
65
17.3/17.7
VET
(0-10/0-10)
ODV-065R18EK
ODV-065R15E18J-G
ODV-065R17E18J-G
ODV-065R18EJ-G
ODV2-065R18K-G
ODV2-065R18K
790-960/1710-2170
XX-Pol
65
17.3/17.7
VET
2013 Q1
43
2013 Q1
44
2013 Q1
45
2013 Q1
46
Available
47
Available
48
(0-10/0-10)
790-960/1710-2690
XX-Pol
65
14.8/18.0
VET
(0-14/0-10)
790-960/1710-2690
XX-Pol
65
16.3/18.0
VET
(0-10/0-10)
790-960/1710-2690
XX-Pol
65
17.3/18.0
VET
(0-10/0-10)
1710-2170/1710-2170
65
XX-Pol
18.0/18.0
VET
(0-10/0-10)
1710-2170/1710-2170
65
XX-Pol
18.0/18.0
VET
(0-10/0-10)
ODV2-065R18J-G
1710-2690/1710-2690
65
XX-Pol
17.7/17.7
0-12/0-12
2013 Q1
49
ODV2-065R18J
1710-2690/1710-2690
65
XX-Pol
17.7/17.7
0-12/0-12
Available
50
65
XXX-Pol
15/15.5/
VET(0-14/
Available
15.5
0-12/0-12)
17.5/17.5/
VET(0-10/
17.7
0-10/0-10)
15.0/17.7/
VET(0-14/
17.7
0-12/0-12)
16.3/16.3/
VET(0-10/
16.8
0-12/0-12)
17.3/17.1/
VET(0-10/
17.6
0-12/0-12)
2x15.0/
VET 2x
2x17.7
( 0-20/0-10)
5) 800/900-1800/1900/2000/2600 XXX-Pol
ODV-065R15B15J15J
ODV-065R18EKK-G
ODV-065R15E18J18J-G
ODV-065R17EJJ-G
ODV-065R18EJJ-G
806-960/1710-2690/
1710-2690
790-960/1710-2170
790-960/2x1710-2690
790-960/2x1710-2690
790-960/2x1710-2690
XX-Pol
65
XXX-Pol
65
XXX-Pol
65
XXX-Pol
65
2013 Q1
2013 Q1
2013 Q1
2013 Q1
51
52
53
54
55
6) 800/900-1800/1900/2000/2600 XXXX-Pol
ODV2-065R15E18K-G
2 x 790-960 /
65
XXXX-Pol
2 x 1710-2170
2013 Q1
56
B: Repeater/Microcell Antenna
Model Number
Freq Range(MHz)
H-HPBW ()
Polarization
Gain (dBi)
Page
ODM-030V16K0-2
1710-2170
30
V-Pol
13.5
57
ODM-030V18B0
824-960
30
V-Pol
18.0
58
ODM-075V11N0
806-960/1710-2500
75
V-Pol
9.7/11.0
59
ODP-030V20K0
1710-2170
30
V-Pol
20.0
60
ODP-032V15N
790-960/1710-2690
32
V-Pol
11.0/15.0
61
OYI-040V12K0-2
1710-2170
40
V-Pol
12.5
62
OYI-040V13B0-2
806-960
40
V-Pol
13
63
C: Indoor Antenna
Model Number
Freq Range(MHz)
H-HPBW
Polarization
()
Gain (dBi)
Mounting
Page
IWH-065V07N0
670-960/1710-2700
65
V-Pol
4.5/7.0
Wall mount
64
IWH-090V08N0-5
806-960/1710-2700
90
V-Pol
7.0/8.0
Wall mount
65
IXD-120V06N0-3
806-960/1710-2500
120
V-Pol
6.0/6.0
ceiling mount
66
IXD-360V03NN(05)
670-960/1710-2700
360
V-Pol
2.0/4.0
ceiling mount
67
IXD-360V03NN(U)
806-960/1710-2700
360
V-Pol
2.0/4.0
ceiling mount
68
IXD-360VH03NT
806-960/1710-2700
360
2.0/4.0
ceiling mount
69
D: RET system
Model Number
Product Description
Page
70
RCU-003
71
RCU-V5002
72
CCU-001AG CCU-003AG
Central Control Unit Fully compliant with AISG issue 1.1 & 2.0
73
E: RF product
Model Number
Product Description
Launch
Page
time
1) Tower Mounted Amplifier
TA-C12FS03
Available
75
TA-C12FDA-A
Available
77
TA-G12FS02
Available
79
TA-E12FS
Available
81
TA-E12FDA-A
Available
83
TA-D12FS
Available
85
TA-D12FD-03
Available
87
TA-D12FDA-A
Available
89
TA-D12FDA
Available
91
TA-P12FDA
Available
93
TA-P12FDA-A
Available
95
TA-W12FDA-A
Available
97
Dual
2012 Q4
99
TA-W12FDA-02
TMA,
1920-1980MHz/2110-2170MHz,
12dB
Gain,
AISG1.1
TA-W12FD
Available
101
TA-Y12FDA-A
Available
103
TA-C12G12FDA-A
Dual band TMA, LTE800 MHz and 900MHz full band, 2 input 2 output ports,
Available
105
Product Available
BT-R1/R2
Available
108
BT-R1S1/R2S2
Available
109
PDM-001B/003B
Available
110
CM-BK2-IN1B
Available
112
CM-BDW2-IN1
Available
113
Available
114
2) Combiner
unit
CM-BDW3-IN1B
CM-DW2-IN1
Available
115
CM-KY2-IN1
Available
116
CM-ML2-IN2
Available
117
CM-BK2(D)-ODXX
Available
118
119
unit
CM-DW2(D)-ODXX
unit
CM-BDW3(D)-ODXX
Available
120
Doubleunit
CM-KY2-OD4B
Available
121
CM-BKY3-OD6
Available
122
combiner,
Available
123
Available
124
1850-1910&1930-1990/1710-1755/2110-2155MHz,
Available
125
2013 Q1
126
2013 Q1
127
2013 Q1
128
2013 Q1
129
unit
CM-BDWY4-OD8
Outdoor
Quad-band
806-960/1710-1880/1920-2170/2500-2690MHz,
250W, Din, Single unit
CM-MY2-OD4
Single unit
CM-PK2-OD4
Outdoor
diplexer,
250W, Din,
Single unit
CM-FK2(D)-ODX
unit
CM-FDW3(D)-ODX
CM-FKY3(D)-ODX
CM-FDWY4(D)-ODX
Doubleunit
Outdoor
triplexer,
380-960/1710-1880/1920-2170/2500-2690MHz,
Available
130
FP-C59-D01
Available
131
FP-G1216-D02(907-960)
Available
132
FP-G1216-D01(903-960)
Available
133
FP-G15D-OD01
Available
134
FP-C22-D01
Available
136
FP-C60-D01
Available
137
DU-E7030-D01
Available
138
DU-D8005-D03
Available
139
FP-G11D-OD1
Available
140
FP-G26D-OD1
Available
142
COM-BD21ODN3
2x3dB Hybrid Coupler Terminated with 100W low PIM Load, 698-2700MHz
Available
145
HC-R-OD150L
Available
147
HC-R-ON150L
Available
148
HC-x-D200L, HC-x-N200L
Available
149
Available
150
4) Project components
HC-R4-ON60L
HC-R4-OD60L
PS-Rx-OD700C
PS-Rx-ON300C
PS-Rx-ON50M
PS-Nx-D700C
PS-Nx-N50M
PS-Nx-N200C
PS-Zx-N200C
CO-Rxx-ON200C
CO-Bxx-D200C
CO-Dxx-D200C
Indoor/Outdoor
wideband
power
splitter,
2way/3Way/4Way,
Available
151
power
splitter,
2way/3Way/4Way,
Available
152
power
splitter,
2way/3Way/4Way,
Available
153
Available
154
Available
155
Available
156
Available
157
Available
158
Available
159
wideband
wideband
Din-F
Indoor wideband power splitter, 2way/3Way/4Way, 800-2500MHz, 50W,
N-F
Indoor wideband power splitter, 2way/3Way/4Way, 800-2500MHz, 200W,
N-F
Indoor wideband power splitter, 2way/3Way/4Way, 824 960 / 1710
2700 MHz, 200W, N-F
Indoor/Outdoor coupler, 6/10/15/20/30/40dB, 698-2700MHz, 200W, N-F
Indoor coupler, 30/40/55dB, 820-960/1700-1900MHz, 200W, DIN-F
coupler,
5/6/7/8/10/13/15/20/30/40dB,
Available
160
coupler,
5/6/7/8/10/13/15/20/30/40dB,
Available
162
DC-Nxx-D200M
Available
164
DC-Nxx-N200M
N-F
DC-Nxx-N200C
Available
165
Available
166
Available
167
Available
168
Available
169
DC-Rxx-OD200M
DC-Rxx-ON200M
Indoor/Outdoor
directional
directional
5) POI
POI-TDA2ODN4SG
POI-TSJ2IDN1HK-TX
POI-TSJ2IDN1HK-RX
10
Technical Specifications
Electrical
Frequency Range
Polarization
Gain
Horizontal Beamwidth
Vertical Beamwidth
Electrical Downtilt Fixed(Optional)
First Upper Sidelobe Suppression
Front-To-Back Ratio
VSWR
3rd Order Intermodulation @ 2x43 dBm
Maximum Power
Impedance
Lightning Protection
MHz
806-880
880-960
Vertical
dBi
deg
deg
deg
dB
dB
17.0
17.2
65
10
0, 6
> 18
> 28
1.5:1
< -150
500
100
50
Direct Ground
dBc
W
Mechanical
Dimensions, HxWxD
Weight, without Mounting Kit
Weight, with Mounting Kit
Radome Material and Color
Mounting Kit
Connector Type and Location
Operational Temperature
Operational Humidity
Operational Wind Speed
Shipping Dimensions, HxWxD
Shipping Weight
mm (in)
kg (lb)
kg (lb)
C
%
km/h (mph)
mm (in)
kg (lb)
2095x265x141 (76.2x10.4x5.5)
11 (24.3)
17.5 (38.6)
UV Resistant PVC, Light Grey
00-ZJ10(12)
7/16 DIN-Female, Bottom
-40 to +60
95
150 (93.2)
2270375 280 (89.4x14.7x11.0)
23 (50.7)
Antenna Pattern
Vertical
pattern
Horizontal
pattern
820MHz @ 0o
870MHz @ 0o
11
960MHz @ 0o
Issued: Nov12
Control: 3-0-2
1/1
Technical Specifications
Electrical
Frequency Range
Polarization
Gain
Horizontal Beamwidth
Vertical Beamwidth
Electrical Downtilt Fixed (Optional)
First Upper Sidelobe Suppression
Front-To-Back Ratio
VSWR
3rd Order Intermodulation @ 2x43 dBm
Maximum Power
Impedance
Lightning Protection
MHz
806-896
870-960
Vertical
dBi
deg
deg
deg
dB
dB
17.7
18.2
65
6.5
0, 6
> 18
> 27
1.4:1
< -150
500
100
50
Direct Ground
dBc
W
Mechanical
Dimensions, HxWxD
Weight, without Mounting kit
Weight, with Mounting kit
Radome Material and Color
Mounting Kit
Connector Type and Location
Operational Temperature
Operational Humidity
Operational Wind Speed
Shipping Dimensions, HxWxD
Shipping Weight
mm (in)
kg (lb)
kg (lb)
2615x265x141(102.7x10.4x5.5)
16(35.3)
22.5(49.6)
UV Resistant PVC, Light Grey
00-ZJ10(08)
7/16 DIN-Female, Bottom
-40 to +60
95
150 (93.2)
2915x375x280(114.5x14.7x10.9)
28(61.8)
C
%
km/h (mph)
mm (in)
kg (lb)
Antenna Pattern
Vertical
pattern
Horizontal
pattern
824MHz @ 0o
915MHz @ 0o
12
960MHz @ 0o
Issued: Nov12
Control: 3-1-4
1/1
Technical Specifications
Electrical
Frequency Range
Polarization
Gain
Horizontal Beamwidth
Vertical Beamwidth
Electrical Downtilt Fixed (Optional)
First Upper Sidelobe Suppression
Front-To-Back Ratio
VSWR
3rd Order Intermodulation @ 2x43 dBm
Maximum Power
Impedance
Lightning Protection
MHz
806-896
870-960
Vertical
dBi
deg
deg
deg
dB
dB
16.7
17.0
90
7.5
0, 6
> 16
> 25
1.4:1
< -150
500
50
Direct Ground
dBc
W
Mechanical
Dimensions, HxWxD
Weight, without Mounting Kit
Weight, with Mounting Kit
Radome Material and Color
Mounting Kit
Connector Type and Location
Operational Temperature
Operational Humidity
Operational Wind Speed
Shipping Dimensions, HxWxD
Shipping Weight
mm (in)
kg (lb)
kg (lb)
2615x265x145 (102.8x10.4x5.7)
15 (33.1)
20 (44.1)
UV Resistant PVC, Light Grey
00-ZJ10(08)
7/16 DIN-Female, Bottom
-40 to +60
95
150 (93.2)
2915x375x280 (114.8x14.7x11.0)
27 (59.5)
C
%
km/h (mph)
mm (in)
kg (lb)
Antenna Pattern
Vertical
pattern
Horizontal
pattern
824MHz @ 0o
870MHz @ 0o
13
960MHz @ 0o
Issued: Nov12
Control: 3-1-3
1/1
Technical Specifications
Electrical
Frequency Range
Polarization
Gain
Horizontal Beamwidth
Vertical Beamwidth
Electrical Downtilt Fixed (Optional)
First Upper Sidelobe Suppression
Front-To-Back Ratio
VSWR
3rd Order Intermodulation @ 2x43 dBm
Maximum Power Per Port
Impedance
Lightning Protection
MHz
1710-1880
dBi
deg
deg
deg
dB
dB
17.6
dBc
W
1850-1990
Vertical
17.8
65
6.5
0, 6
> 18
> 28
1.5:1
< -150
300
50
Direct Ground
1920-2170
18.0
Mechanical
Dimensions, HxWxD
Weight, without Mounting Kit
Weight, with Mounting Kit
Radome Material and Color
Mounting Kit
Connector Type and Location
Operational Temperature
Operational Humidity
Operational Wind Speed
Shipping Dimensions, HxWxD
Shipping Weight
mm (in)
kg (lb)
kg (lb)
1310x173x81 (51.5x6.8x3.1)
5.5 (12.1)
7 (15.4)
UV Resistant PVC, Light Grey
SJA-B-14C(10)
7/16 DIN-Female, Bottom
-40 to +60
95
150 (93.2)
1435x230x210 (56.5x9.1x8.3)
9.2 (20.3)
C
%
km/h (mph)
mm (in)
kg (lb)
Antenna Pattern
Vertical
pattern
Horizontal
pattern
1710MHz @ 0o
1850MHz @ 0o
14
2170MHz @ 0o
Issued: Nov12
Control: 3-1-3
1/1
Technical Specifications
Electrical
Frequency Range
Polarization
Gain
Horizontal Beamwidth
Vertical Beamwidth
Electrical Downtilt Fixed (Optional)
First Upper Sidelobe Suppression
Front-To-Back Ratio
Cross-polar Discrimination @ 0o
VSWR
Isolation Between Ports
3rd Order Intermodulation @ 2x43 dBm
Maximum Power Per Port
Impedance
Lightning Protection
MHz
806-896
870-960
45
dBi
deg
deg
deg
dB
dB
dB
14.6
15.1
65
14
13
0, 6
> 15
> 25
> 17
1.4:1
> 30
< -150
500
100
50
Direct Ground
dB
dBc
W
Mechanical
Dimensions, HxWxD
Weight, without Mounting Kit
Weight, with Mounting Kit
Radome Material and Color
Mounting Kit
Connector Type and Location
Operational Temperature
Operational Humidity
Operational Wind Speed
Shipping Dimensions, HxWxD
Shipping Weight
mm (in)
kg (lb)
kg (lb)
1315x265x141 (51.6x10.4x5.6)
9.5 (20.9)
15.5 (34.2)
UV Resistant PVC, Light Grey
SJA-B-12R(16)
2x7/16 DIN-Female, Bottom
-40 to +60
95
150 (93.2)
1610x375x275 (63.4x14.8x10.8)
18.3 (40.3)
C
%
km/h (mph)
mm (in)
kg (lb)
Antenna Pattern
Vertical
Pattern
Horizontal
Pattern
824MHz @ 0o
915MHz @ 0o
15
960MHz @ 0o
Issued: Nov12
Control: 3-1-3
1/1
Technical Specifications
Electrical
Frequency Range
Polarization
Gain
Horizontal Beamwidth
Vertical Beamwidth
Electrical Downtilt Fixed (Optional)
First Upper Sidelobe Suppression
Front-To-Back Ratio
Cross-polar Discrimination @ 0o
VSWR
Isolation Between Ports
3rd Order Intermodulation @ 2x43 dBm
Maximum Power per Port
Impedance
Lightning Protection
MHz
806-896
870-960
45
dBi
deg
deg
deg
dB
dB
dB
16.7
17.1
65
9.8
0, 6
> 18
> 25
> 17
1.4:1
> 30
< -150
500
100
50
Direct Ground
dB
dBc
W
Mechanical
Dimensions, HxWxD
Weight, without Mounting Kit
Weight, with Mounting Kit
Radome Material and Color
Mounting Kit
Connector Type and Location
Operational Temperature
Operational Humidity
Operational Wind Speed
Shipping Dimensions, HxWxD
Shipping Weight
mm (in)
kg (lb)
kg (lb)
1935x265x141 (76.1x10.4x5.6)
13.8 (30.4)
19.8 (43.7)
UV Resistant PVC, Light Grey
00-ZJ10(12)
2x7/16 DIN-Female, Bottom
-40 to +60
95
150 (93.2)
2270x375x280 (89.4x14.8x11.0)
26.5 (58.4)
C
%
km/h (mph)
mm (in)
kg (lb)
Antenna Pattern
Vertical
pattern
Horizontal
pattern
870MHz @0o
915MHz @0o
16
960MHz @0o
Issued: Nov12
Control: 3-1-3
1/1
Technical Specifications
Electrical
Frequency Range
Polarization
Gain
Horizontal Beamwidth
Vertical Beamwidth
Electrical Downtilt Fixed (Optional)
First Upper Sidelobe Suppression
Front-To-Back Ratio
Cross-polar Discrimination @ 0o
VSWR
Isolation Between Ports
3rd Order Intermodulation @ 2x43 dBm
Maximum Power per Port
Impedance
Lightning Protection
MHz
806-896
870-960
45
dBi
deg
deg
deg
dB
dB
dB
17.8
18.0
65
7
0, 6
> 18
> 25
> 17
1.5:1
> 30
< -150
500
100
50
Direct Ground
dB
dBc
W
Mechanical
Dimensions, HxWxD
Weight, without Mounting Kit
Weight, with Mounting Kit
Radome Material and Color
Mounting Kit
Connector Type and Location
Operational Temperature
Operational Humidity
Operational Wind Speed
Shipping Dimensions, HxWxD
Shipping Weight
mm (in)
kg (lb)
kg (lb)
2615x265x141 (102.7x10.4x5.6)
18.5 (40.8)
24.0 (52.9)
UV Resistant PVC, Light Grey
00-ZJ10(08)
2x7/16 DIN-Female, Bottom
-40 to +60
95
150 (93.2)
2895x375x265 (114.0x14.8x10.4)
30.7 (67.7)
C
%
km/h (mph)
mm (in)
kg (lb)
Antenna Pattern
Vertical
pattern
Horizontal
pattern
824MHz @ 0o
915MHz @ 0o
17
960MHz @ 0o
Issued: Nov12
Control: 3-1-3
1/1
Technical Specifications
Electrical
Frequency Range
Polarization
Gain
Horizontal Beamwidth
Vertical Beamwidth
Electrical Downtilt Fixed(Optional)
First Upper Sidelobe Suppression
Front-To-Back Ratio
VSWR
Isolation Between Ports
Cross-polar Discrimination @ 0o
3rd Order Intermodulation @ 2x43 dBm
Maximum Power per Port
Impedance
Lightning Protection
MHz
790-896
870-960
45
dBi
deg
deg
deg
dB
dB
17.6
18.0
65
7
0, 6
> 18
> 25
1.5:1
> 30
> 17
< -150
500
100
50
Direct Ground
dB
dB
dBc
W
Mechanical
Dimensions, HxWxD
Weight, without Mounting Kit
Weight, with Mounting Kit
Radome Material and Color
Mounting Kit
Connector Type and Location
Operational Temperature
Operational Humidity
Operational Wind Speed
Shipping Dimensions, HxWxD
Shipping Weight
mm (in)
kg (lb)
kg (lb)
2615x265x141 (102.7x10.4x5.6)
19 (41.8)
25.5 (56.2)
Fiberglass, Light grey
00-ZJ10(08)
2 x 7/16 DIN-Female, Bottom
-50 to +70
95
150 (93.2)
2895x375x265 (114.0x14.8x10.4)
30.7 (67.7)
C
%
km/h (mph)
mm (in)
kg (lb)
Antenna Pattern
Vertical
pattern
Horizontal
pattern
824MHz @ 0o
915MHz @ 0o
18
960MHz @ 0o
Issued: Nov12
Control: 3-0-0
1/1
Technical Specifications
Electrical
Frequency Range
Polarization
Gain
Horizontal Beamwidth
Vertical Beamwidth
Electrical Downtilt Fixed(Optional)
First Upper Sidelobe Suppression
Front-To-Back Ratio
Cross-polar Discrimination @ 0o
VSWR
Isolation Between Ports
3rd Order Intermodulation @ 2x43 dBm
Maximum Power per Port
Impedance
Lightning Protection
MHz
806-896
870-960
45
dBi
deg
deg
deg
dB
dB
dB
16.7
17.1
90
7
0, 6
> 18
> 25
> 17
1.4:1
> 30
< -150
500
50
Direct Ground
dB
dBc
W
Mechanical
Dimensions, HxWxD
Weight, without Mounting Kit
Weight, with Mounting Kit
Radome Material and Color
Mounting Kit
Connector Type and Location
Operational Temperature
Operational Humidity
Operational Wind Speed
Shipping Dimensions, HxWxD
Shipping Weight
mm (in)
kg (lb)
kg (lb)
2615x265x141 (102.7x10.1x5.6)
18.5 (40.8)
24.0 (52.9)
UV Resistant PVC, Light Grey
00-ZJ10(08)
2x7/16 DIN-Female, Bottom
-40 to +60
95
150 (93.2)
2915x375x280 (114.8x14.8x11.0)
31.5 (69.4)
C
%
km/h (mph)
mm (in)
kg (lb)
Antenna Pattern
Vertical
pattern
Horizontal
pattern
824MHz @ 0o
870MHz @ 0o
19
960MHz @ 0o
Issued: Nov12
Control: 3-1-1
1/1
Technical Specifications
Electrical
Frequency Range
Polarization
Gain
Horizontal Beamwidth
Vertical Beamwidth
Electrical Downtilt Range
First Upper Sidelobe Suppression
0-30o Upper Sidelobe Suppression
Front-To-Back Ratio
Cross-polar Discrimination @ 0o
VSWR
Isolation Between Ports
3rd Order Intermodulation @ 2x43 dBm
Maximum Power per Port
Impedance
Lightning Protection
MHz
790- 896
870- 960
45
dBi
deg
deg
deg
dB
18.8
34
10
19.3
32
9.5
0-10
>17(0o), >16(5o), >16(10o)
> 16
> 27(total power)
> 18
1.5:1
> 28
< -150
500
50
Direct Ground
dB
dB
dB
dBc
W
Mechanical
Dimensions, HxWxD
Weight, without Mounting Kit
Weight, with Mounting Kit
Radome Material and Color
Mounting Kit
Connector Type and Location
Operational Temperature
Operational Humidity
Operational Wind Speed
Shipping Dimensions, HxWxD
Shipping Weight
mm (in)
kg (lb)
kg (lb)
1975x500x140 (77.8x19.7x5.5)
36 (79.4)
43 (94.8)
Fiberglass, Light Grey
00-ZJ11(12)
2x7/16 DIN-Female, Bottom
-50 to +70
95
150 (93.2)
2322x635x305 (91.4x25.0x12.0)
50 (110)
C
%
km/h (mph)
mm (in)
kg (lb)
Antenna Pattern
Vertical
pattern
Horizontal
pattern
790MHz @ 0o
875MHz @ 0o
20
960MHz @ 0o
Issued: Nov12
Control: 0-0-1
1/1
Technical Specifications
Electrical
Frequency Range
Polarization
Gain
Horizontal Beamwidth
Vertical Beamwidth
Electrical Downtilt Range
First Upper Sidelobe Suppression
0-30Upper Sidelobe Suppression
Front-To-Back Ratio
Cross-polar Discrimination @ 0o
Cross-polar Discrimination @ 60
VSWR
Isolation Between Ports
3rd Order Intermodulation @ 2x43 dBm
Maximum Power per Port
Impedance
Lightning Protection
MHz
790-896
880-960
45
dBi
deg
deg
deg
dB
dB
dB
dB
dB
14.7
67
15
15.2
63
13
0-20
>18(0o), >16(10o), >16(20o)
>16
> 25(total power)
> 18
> 10
1.5:1
> 30
< -150
500
50
Direct Ground
dB
dBc
W
Mechanical
Dimensions, HxWxD
Weight,without Mounting Kit
Weight,with Mounting Kit
Radome Material and Color
Mounting Kit
Connector Type and Location
Operational Temperature
Operational Humidity
Operational Wind Speed
Shipping Dimensions, HxWxD
Shipping Weight
mm (in)
kg (lb)
kg (lb)
1415x265x120 (55.7x10.4x4.7)
13.7 (30.2)
18.7 (41.2)
Fiberglass, Light Grey
SJA-B-12R(16)
2x7/16 DIN-Female, Bottom
-50 to +70
95
150 (93.2)
1725x375x255 (67.9x14.8x10.0)
23.7 (52.2)
C
%
km/h (mph)
mm (in)
kg (lb)
Antenna Pattern
Vertical
pattern
Horizontal
pattern
790MHz @ 0o
870MHz @ 0o
21
960MHz @ 0o
Issued: Oct12
Control: 0-0-0
1/1
Technical Specifications
Electrical
Frequency Range
Polarization
Gain
Horizontal Beamwidth
Vertical Beamwidth
Electrical Downtilt Range
First Upper Sidelobe Suppression
0-30Upper Sidelobe Suppression
Front-To-Back Ratio
Cross-polar Discrimination @ 0o
Cross-polar Discrimination @ 60o
VSWR
Isolation Between Ports
3rd Order Intermodulation @ 2x43 dBm
Maximum Power per Port
Impedance
Lightning Protection
MHz
790-896
880-960
45
dBi
deg
deg
deg
dB
dB
dB
dB
dB
16.2
67
9.7
16.6
65
9.2
0-10
18
16
> 25(total power)
20
10
< 1.5:1
> 30
< -150
500
1
50
dB
dBc
W
Direct Ground
Mechanical
Dimensions, HxWxD
Weight, without Mounting Kit
Weight, with Mounting Kit
Radome Material and Color
Mounting Kit
Connector Type and Location
Operational Temperature
Operational Humidity
Operational Wind Speed
Shipping Dimensions, HxWxD
Shipping Weight
mm (in)
kg (lb)
kg (lb)
1975x265x125 (78.7x10.4x4.9)
19.5 (43.0)
24.5 (54.0)
Fiberglass, Light Grey
SJA-B-12R
2x7/16 DIN-Female, Bottom
-50 to +70
95
150 (93.2)
2285x375x255 (89.9x14.8x10.0)
29.5 (65.0)
C
%
km/h (mph)
mm (in)
kg (lb)
Antenna Pattern
Vertical
pattern
Horizontal
pattern
806MHz @ 0o
880MHz @ 0o
22
960MHz @ 0o
Issued: Nov12
Control: 0-0-4
1/1
Technical Specifications
Electrical
Frequency Range
Polarization
Gain
Horizontal Beamwidth
Vertical Beamwidth
Electrical Downtilt Range
First Upper Sidelobe Suppression
Front-To-Back Ratio
Cross-polar Discrimination @ 0o
Cross-polar Discrimination @ 60o
VSWR
Isolation Between Ports
3rd Order Intermodulation @ 2x43 dBm
Maximum Power per Port
Impedance
Lightning Protection
MHz
790-896
880-960
45
dBi
deg
deg
deg
dB
dB
dB
dB
dB
dBc
W
17.0
67
7.7
17.5
65
7.3
0-12
18(0), 18(4), 16(8), 16(12)
> 25(total power)
20
10
< 1.5:1
> 30
< -150
500
50
Direct Ground
Mechanical
Dimensions, HxWxD
Weight, without Mounting Kit
Weight, with Mounting Kit
Radome Material and Color
Mounting Kit
Connector Type and Location
Operational Temperature
Operational Humidity
Operational Wind Speed
Shipping Dimensions, HxWxD
Shipping Weight
mm (in)
kg (lb)
kg (lb)
2615x265x145 (103.0x10.4x5.7)
23 (50.7)
28.5 (62.8)
Fiberglass, Light Grey
00-ZJ10(08)
2x7/16 DIN-Female, bottom
-40 to +60
95
150 (93.2)
2915x375x275 (114.8x14.8x10.8)
35 (77.2)
C
%
km/h (mph)
mm (in)
kg (lb)
Antenna Pattern
Vertical
pattern
Horizontal
pattern
806MHz @ 0o
870MHz @ 0o
23
960MHz @ 0o
Issued: Nov12
Control: 0-0-0
1/1
Technical Specifications
Electrical
Frequency Range
Polarization
Gain
Horizontal Beamwidth
Vertical Beamwidth
Electrical Downtilt Range
First Upper Sidelobe Suppression
Front-To-Back Ratio
Cross-polar Discrimination @ 0o
VSWR
Isolation Between Ports
3rd Order Intermodulation @ 2x43 dBm
Maximum Power per Port
Impedance
Lightning Protection
MHz
806-896
870-960
45
dBi
deg
deg
deg
dB
dB
dB
15.0
15.5
65
14
0-14
19(0o),17(7o),15(14o)
> 25
> 20
1.5:1
> 30
< -150
500
50
Direct Ground
dB
dBc
W
Mechanical
Dimensions, HxWxD
Weight, without Mounting Kit
Weight, with Mounting Kit
Radome Material and Color
Mounting Kit
Connector Type and Location
Operational Temperature
Operational Humidity
Operational Wind Speed
mm (in)
kg (lb)
kg (lb)
C
%
km/h (mph)
1415x265x141 (55.7x10.4x5.6)
16 (35.3)
21 (46.3)
UV Resistant PVC, Light Grey
SJA-B-12R(16)
2x7/16 DIN-Female, Bottom
-40 to +60
95
150 (93.2)
mm (in)
kg (lb)
1680x335x230 (66.1x13.2x9.1)
23 (50.7)
Antenna Pattern
Vertical
pattern
Horizontal
pattern
840MHz @ 0o
870MHz @ 0o
24
930MHz @ 0o
Issued: Nov12
Control: 3-0-3
1/1
Technical Specifications
Electrical
Frequency Range
Polarization
Gain
Horizontal Beamwidth
Vertical Beamwidth
Electrical Downtilt Range
First Upper Sidelobe Suppression
Front-To-Back Ratio
Cross-polar Discrimination @ 0o
VSWR
Isolation Between Ports
3rd Order Intermodulation @ 2x43 dBm
Maximum Power per Port
Impedance
Lightning Protection
MHz
806-896
870-960
45
dBi
deg
deg
deg
dB
dB
dB
16.5
17.0
65
10
0-10
18(0o),16(4o),10(10o)
> 25
> 17
1.5:1
> 30
< -150
500
100
50
Direct Ground
dB
dBc
W
Mechanical
Dimensions, HxWxD
Weight, without Mounting Kit
Weight, with Mounting Kit
Radome Material and Color
Mounting Kit
Connector Type and Location
Operational Temperature
Operational Humidity
Operational Wind Speed
Shipping Dimensions, HxWxD
Shipping Weight
mm (in)
kg (lb)
kg (lb)
1975x265x141 (77.6x10.4x5.6)
16.5 (36.4)
22.5 (60.0)
UV Resistant PVC, Light Grey
00-ZJ10(12)
2x7/16 DIN-Female, Bottom
-40 to +60
95
150 (93.2)
2265x375x265 (89.2x14.8x10.4)
27 (59.5)
C
%
km/h (mph)
mm (in)
kg (lb)
Antenna Pattern
Vertical
pattern
Horizontal
pattern
806MHz @ 0o
870MHz @ 0o
25
960MHz @ 0o
Issued: Nov12
Control: 3-0-4
1/1
Technical Specifications
Electrical
Frequency Range
Polarization
Gain
Horizontal Beamwidth
Vertical Beamwidth
Electrical Downtilt Range
First Upper Sidelobe Suppression
Front-To-Back Ratio
Cross-polar Discrimination @ 0o
VSWR
Isolation Between Ports
3rd Order Intermodulation @ 2x43 dBm
Maximum Power per Port
Impedance
Lightning Protection
MHz
806-896
870-960
45
dBi
deg
deg
deg
dB
dB
dB
17.1
17.6
65
7
0-8
18(0o),15(4o),13(8o)
> 25
> 20
1.5:1
> 30
< -150
500
50
Direct Ground
dB
dBc
W
Mechanical
Dimensions, HxWxD
Weight, without Mounting Kit
Weight, with Mounting Kit
Radome Material and Color
Mounting Kit
Connector Type and Location
Operational Temperature
Operational Humidity
Operational Wind Speed
Shipping Dimensions, HxWxD
Shipping Weight
mm (in)
kg (lb)
kg (lb)
2615x265x141 (103.0x10.4x5.6)
20.0 (44.1)
25.5 (56.2)
UV Resistant PVC, Light Grey
00-ZJ10(08)
2x7/16 DIN-Female, Bottom
-40 to +60
95
150 (93.2)
2915x375x280 (114.6x14.7x11.0)
32.0 (70.5)
C
%
km/h (mph)
mm (in)
kg (lb)
Antenna Pattern
Vertical
pattern
Horizontal
pattern
806MHz @ 0o
870MHz @ 0o
26
960MHz @ 0o
Issued: Nov12
Control: 3-0-3
1/1
Technical Specifications
Electrical
Frequency Range
Polarization
Gain
Horizontal Beamwidth
Vertical Beamwidth
Electrical Downtilt Range
First Upper Sidelobe Suppression
Front-To-Back Ratio
Cross-polar Discrimination @ 0o
VSWR
Isolation Between Ports
3rd Order Intermodulation @ 2x43 dBm
Maximum Power per Port
Impedance
Lightning Protection
MHz
790-896
880-960
45
dBi
deg
deg
deg
dB
dB
dB
16.0
16.5
90
7
0-12
18(0o), 16(6o), 16(12o)
> 25(total power)
> 17
1.5:1
> 30
< -150
500
50
Direct Ground
dB
dBc
W
Mechanical
Dimensions, HxWxD
Weight, without Mounting Kit
Weight, with Mounting Kit
Radome Material and Color
Mounting Kit
Connector Type and Location
Operational Temperature
Operational Humidity
Operational Wind Speed
Shipping Dimensions, HxWxD
Shipping Weight
mm (in)
kg (lb)
kg (lb)
2615x265x145 (102.9x10.4x5.7)
25 (55.0)
30.5 (67.2)
Fiberglass, Light Grey
00-ZJ10(08)
2x7/16 DIN-Female, Bottom
-50 to +70
95
150 (93.2)
2915x375x280 (114.8x14.8x11.0)
35 (77.0)
C
%
km/h (mph)
mm (in)
kg (lb)
Antenna Pattern
Vertical
pattern
Horizontal
pattern
820MHz @ 0o
930MHz @ 0o
27
960MHz @ 0o
Issued: Nov12
Control: 0-0-1
1/1
Technical Specifications
Electrical
Frequency Range
Polarization
Gain
Horizontal Beamwidth
Vertical Beamwidth
Electrical Downtilt Fixed(Optional)
Upper Sidelobe Suppression @ 0o~30 o
Front-To-Back Ratio
VSWR
Isolation Between Ports
Cross-polar Discrimination @ 0o
3rd Order Intermodulation @ 2x43 dBm
Maximum Power per Port
Impedance
Lightning Protection
MHz
1710-1880
dBi
deg
deg
deg
dB
dB
15.0
dB
dB
dBc
W
1850-1990
45
15.2
65
12
0, 6
> 16
> 25
30
>1.5:1
> 30
30
> 17
1920-2170
15.3
< -150
300
100
50
Direct Ground
Mechanical
Dimensions, HxWxD
Weight, without Mounting Kit
Weight, with Mounting Kit
Radome Material and Color
Mounting Kit
Connector Type and Location
Operational Temperature
Operational Humidity
Operational Wind Speed
Shipping Dimensions, HxWxD
Shipping Weight
mm (in)
kg (lb)
kg (lb)
665x120x60 (26.2x4.7x2.4)
3.0 (6.6)
4.7 (10.4)
Fiberglass, Light Grey
SJA-B-14F
2x7/16 DIN-Female, Bottom
-50 to +70
95
150 (93.2)
885x260x170 (34.8x10.2x6.7)
5.6 (12.3)
C
%
km/h (mph)
mm (in)
kg (lb)
Antenna Pattern
Vertical
pattern
Horizontal
pattern
1710MHz @ 0o
1920MHz @ 0o
28
2170MHz @ 0o
Issued: Nov12
Control: 0-0-0
1/1
Technical Specifications
Electrical
Frequency Range
Polarization
Gain
Horizontal Beamwidth
Vertical Beamwidth
Electrical Downtilt Fixed(Optional)
First Upper Sidelobe Suppression
Front-To-Back Ratio
VSWR
Isolation Between Ports
Cross-polar Discrimination @ 0o
3rd Order Intermodulation @ 2x43 dBm
Maximum Power per Port
Impedance
Lightning Protection
MHz
1710-1880
dBi
deg
deg
deg
dB
dB
17.6
dB
dB
dBc
W
1850-1990
45
17.7
65
6.5
0, 6
18
> 25(total power)
1.4:1
> 30
> 17
< -150
300
100
50
Direct Ground
1920-2170
18.0
Mechanical
Dimensions, HxWxD
Weight, without Mounting Kit
Weight, with Mounting Kit
Radome Material
Mounting Kit
Connector Type and Location
Operational Temperature
Operational Humidity
Operational Wind Speed
Shipping Dimensions, HxWxD
Shipping Weight
mm (in)
kg (lb)
kg (lb)
1310x120x60 (51.6x4.7x2.4)
5.5 (12.1)
7.2 (15.9)
Fiberglass, Light grey
SJA-B-14F(12)
2x7/16 DIN-Female, Bottom
-50 to +70
95
150 (93.2)
1510x190x150 (59.4x7.5x5.9)
9.2 (20.3)
C
%
km/h (mph)
mm (in)
kg (lb)
Antenna Pattern
Vertical
pattern
Horizontal
pattern
1710MHz @ 0o
1920MHz @ 0o
29
2170MHz @ 0o
Issued: Nov12
Control: 0-0-0
1/1
Technical Specifications
Electrical
Frequency Range
Polarization
Gain
Horizontal Beamwidth
Vertical Beamwidth
Electrical Downtilt Range
First Upper Sidelobe Suppression
Front-To-Back Ratio
Cross-polar Discrimination @ 0o
VSWR
Isolation Between Ports
3rd Order Intermodulation @ 2x43 dBm
Maximum Power per Port
Impedance
Lightning Protection
MHz
dBi
deg
deg
deg
dB
dB
dB
dB
dBc
W
1710-1880
1850-1990
1920-2170
45
20.2
20.6
20.8
34
32
30
6.8
6.5
6
0-10
>20(00), >17(50), >16(100)
> 25(total power)
> 18
1.5:1
> 30
< -150
300
50
Direct Ground
Mechanical
Dimensions, HxWxD
Weight, without Mounting Kit
Weight, with Mounting Kit
Radome Material and Color
Mounting Kit
Connector Type and Location
Operational Temperature
Operational Humidity
Operational Wind Speed
Shipping Dimensions, HxWxD
Shipping Weight
mm (in)
kg (lb)
kg (lb)
1315x300x86 (51.8x11.8x3.4)
14.5 (32.0)
19.5 (43.0)
Fiberglass, Light Grey
SJA-B-12R(16)
2x7/16 DIN-Female, Bottom
-50 to +70
95
150 (93.2)
1595x415x215 (62.8x16.3x8.5)
24.0 (52.9)
C
%
km/h (mph)
mm (in)
kg (lb)
Antenna Pattern
Vertical
pattern
Horizontal
pattern
1710MHz @ 0o
1990MHz @ 0o
30
2170MHz @ 0o
Issued: Nov12
Control: 0-0-0
1/1
Technical Specifications
Electrical
Frequency Range
Polarization
Gain
Horizontal Beamwidth
Vertical Beamwidth
Electrical Downtilt Range
First Upper Sidelobe Suppression
Front-To-Back Ratio
Cross-polar Discrimination @ 0o
VSWR
Isolation Between Ports
3rd Order Intermodulation @ 2x43 dBm
Maximum Power per Port
Impedance
Lightning Protection
MHz
dBi
deg
deg
deg
dB
dB
dB
dB
dBc
W
1710-1880
1850-1990
1920-2170
45
14.7
15.0
15.3
65
13
12.5
12
0-20
>17(00), >16(100), >16(200)
o
>25(0-15 total power); >23(15-20o total power)
> 17
1.5:1
> 28
< -150
300
50
Direct Ground
Mechanical
Dimensions, HxWxD
Weight, without Mounting kit
Weight, with Mounting kit
Radome Material and Color
Mounting Kit
Connector Type and Location
Operational Temperature
Operational Humidity
Operational Wind Speed
Shipping Dimensions, HxWxD
Shipping Weight
mm (in)
kg (lb)
kg (lb)
650x145x86 (25.6x5.7x3.4)
5.6 (12.3)
7.3 (16.1)
Fiberglass, Light Grey
SJA-B-14C(16)
2x7/16 DIN-Female, Bottom
-50 to +70
95
150 (93.2)
855x260x190 (33.7x10.2x7.5)
9.1 (20.1)
C
%
km/h (mph)
mm (in)
kg (lb)
Antenna Pattern
Vertical
pattern
Horizontal
pattern
1710MHz @ 0o
1920MHz @ 0o
31
2170MHz @ 0o
Issued: Nov12
Control: 0-0-0
1/1
Technical Specifications
Electrical
Frequency Range
Polarization
Gain
Horizontal Beamwidth
Vertical Beamwidth
Electrical Downtilt Range
First Upper Sidelobe Suppression
Front-To-Back Ratio
Cross-polar Discrimination @ 0o
Cross-polar Discrimination @ 60 o
VSWR
Isolation Between Ports
3rd Order Intermodulation @ 2x43 dBm
Maximum Power per Port
Impedance
Lightning Protection
MHz
dBi
deg
deg
deg
dB
dB
dB
dB
dB
dBc
W
1710-1880
1850-1990
1920-2170
45
17.5
17.7
18.0
67
65
63
7.2
6.8
6.4
0-10
>20(0o), >17(5o), >16(10o)
25(total power)
> 18
> 10(typ.)
1.5:1
> 30
< -150
300
50
Direct Ground
Mechanical
Dimensions, HxWxD
Weight, without Mounting Kit
Weight, with Mounting Kit
Radome Material and Color
Mounting Kit
Connector Type and Location
Operational Temperature
Operational Humidity
Operational Wind Speed
Shipping Dimensions, HxWxD
Shipping Weight
mm (in)
kg (lb)
kg (lb)
1315x145x86 (51.8x5.7x3.4)
8.5 (18.7)
10.3 (22.7)
Fiberglass, Light Grey
SJA-B-14D(10)
2x7/16 DIN-Female, Bottom
-50 to +70
95
150 (93.2)
1505x245x190 (59.2x9.6x7.5)
13 (28.7)
C
%
km/h (mph)
mm (in)
kg (lb)
Antenna Pattern
Vertical
pattern
Horizontal
pattern
1710MHz @ 0o
1990MHz @ 0o
32
2170MHz @ 0o
Issued: Nov12
Control: 0-0-0
1/1
Technical Specifications
Electrical
Frequency Range
Polarization
Gain
Horizontal Beamwidth
Vertical Beamwidth
Electrical Downtilt Range
First Upper Sidelobe Suppression
Front-To-Back Ratio
Cross-polar Discrimination @ 0o
Cross-polar Discrimination @ 60
VSWR
Isolation Between Ports
3rd Order Intermodulation @ 2x43 dBm
Maximum Power per Port
Impedance
Lightning Protection
MHz
dBi
deg
deg
deg
dB
dB
dB
dB
dB
dBc
W
1710-1880
1850-1990
1920-2170
45
17.5
17.7
18.0
67
65
63
7.2
6.8
6.4
0-10
>20(0o), >17(5o), >16(10o)
25(total power)
> 18
> 10(typ.)
1.5:1
> 30
< -150
300
50
Direct Ground
Mechanical
Dimensions, HxWxD
Weight, without Mounting Kit
Weight, with Mounting Kit
Radome Material and Color
Mounting Kit
Connector Type and Location
Operational Temperature
Operational Humidity
Operational Wind Speed
Shipping Dimensions, HxWxD
Shipping Weight
mm (in)
kg (lb)
kg (lb)
1315x145x86 (51.8x5.7x3.4)
7.5 (16.5)
9.3 (20.5)
UV Resistant PVC, Light Grey
SJA-B-14D(10)
2x7/16 DIN-Female, Bottom
-40 to +60
95
150 (93.2)
1505x245x190 (59.2x9.6x7.5)
12 (26.4)
C
%
km/h (mph)
mm (in)
kg (lb)
Antenna Pattern
Vertical
pattern
Horizontal
pattern
1710MHz @ 0o
1990MHz @ 0o
33
2170MHz @ 0o
Issued: Nov12
Control: 0-0-0
1/1
Technical Specifications
Electrical
Frequency Range
MHz
Polarization
Gain
Horizontal Beamwidth
Vertical Beamwidth
Electrical Downtilt Range
dBi
deg
deg
deg
dB
dB
dB
dB
dB
dBc
W
17101880
18501990
1920230024902170
2500
2690
45
17.4
17.6
17.8
18.0
17.8
68
66
65
63
64
7.4
7.0
6.6
5.6
5.2
012
18(0 o), 18(6 o),
18(0 o),17(6 o),
o
17(12 )
16(12 o)
15
14
> 25
18 (typ.)
< 1.5:1
> 28
< -150
250
50
Direct Ground
Mechanical
Dimensions, HxWxD
Weight, without Mounting Kit
Weight, with Mounting Kit
Radome Material and Color
Mounting Kit
Connector Type and Location
Operational Temperature
Operational Humidity
Operational Wind Speed
Shipping Dimensions, HxWxD
Shipping Weight
mm (in)
kg (lb)
kg (lb)
1375x160x83 (54.1x6.3x3.3)
10.5 (23.1)
12 (26.4)
Fiberglass, Light Grey
SJA-B-14D
2 x 7/16 DIN-Female, Bottom
-50 to +70
95
150 (93.2)
1563x245x180 (61.5x9.6x7.1)
14.5 (31.9)
C
%
km/h (mph)
mm (in)
kg (lb)
Antenna Pattern
Vertical
pattern
Horizontal
pattern
1710MHz @ 2
1920MHz @ 2
34
2500MHz @ 2
Issued: Nov12
Control: 0-0-3
1/1
Technical Specifications
Electrical
Frequency Range
MHz
Polarization
Gain
Horizontal Beamwidth
Vertical Beamwidth
Electrical Downtilt Range
dBi
deg
deg
deg
dB
dB
dB
dB
dB
dBc
W
17101880
18501990
1920230024902170
2500
2690
45
17.4
17.6
17.8
18.0
17.8
68
66
65
63
64
7.4
7.0
6.6
5.6
5.2
012
18(0 o), 18(6 o),
18(0 o),17(6 o),
o
17(12 )
16(12 o)
15
14
> 25
18(typ.)
< 1.5:1
> 28
< -150
250
50
Direct Ground
Mechanical
Dimensions, HxWxD
Weight, without Mounting Kit
Weight, with Mounting Kit
Radome Material and Color
Mounting Kit
Connector Type and Location
Operational Temperature
Operational Humidity
Operational Wind Speed
Shipping Dimensions, HxWxD
Shipping Weight
mm (in)
kg (lb)
kg (lb)
1375x160x83 (54.1x6.3x3.3)
9 (19.8)
10.5 (23.1)
UV Resistant PVC, Light Grey
SJA-B-14D
2x7/16 DIN-Female, Bottom
-40 to +60
95
150 (93.2)
1563x245x180 (61.5x9.6x7.1)
13 (28.7)
C
%
km/h (mph)
mm (in)
kg (lb)
Antenna Pattern
Vertical
pattern
Horizontal
pattern
1710MHz @ 2
1920MHz @ 2
35
2500MHz @ 2
Issued: Nov12
Control: 0-0-3
1/1
Technical Specifications
Electrical
Frequency Range
Polarization
Gain
Horizontal Beamwidth
Vertical Beamwidth
Electrical Downtilt Range
First Upper Sidelobe Suppression
Front-To-Back Ratio
Cross-polar Discrimination @ 0o
VSWR
Isolation Between Ports
3rd Order Intermodulation @ 2x43 dBm
Maximum Power Per Port
Impedance
Lightning Protection
MHz
dBi
deg
deg
deg
dB
dB
dB
dB
dBc
W
1710-1880
1850-1990
1920-2170
45
16.3
16.4
16.5
90
7
0-10
>18(00), >16(50), >16(100)
> 25(total power)
> 17
1.5:1
> 28
< -150
300
100
50
Direct Ground
Mechanical
Dimensions, HxWxD
Weight, without Mounting kit
Weight, with Mounting kit
Radome Material and Color
Mounting Kit
Connector Type and Location
Operational Temperature
Operational Humidity
Operational Wind Speed
Shipping Dimensions, HxWxD
Shipping Weight
mm (in)
kg (lb)
kg (lb)
1310x173x81 (51.5x6.8x3.2)
9.0 (19.8)
10.8 (23.8)
Fiberglass, Light Grey,
SJA-B-14C(10)
2x7/16 DIN-Female, Bottom
-50 to +70
95
150 (93.2)
1435x230x210 (56.5x9.1x8.3)
12.8 (28.2)
C
%
km/h (mph)
mm (in)
kg (lb)
Antenna Pattern
Vertical
pattern
Horizontal
pattern
1710MHz @ 0o
1920MHz @ 0o
36
2170MHz @ 0o
Issued: Nov12
Control: 0-0-1
1/1
XXPol,806-960/1710-2170MHz,65,16.7/17.5dBi
Technical Specifications
Electrical
Frequency Range
Polarization
Gain
Horizontal Beamwidth
Vertical Beamwidth
Electrical Downtilt Fixed (Optional)
First Upper Sidelobe Suppression
Front-To-Back Ratio
Cross-polar Discrimination @ 0o
VSWR
Isolation Between Ports / Bands
3rd Order Intermodulation @ 2x43 dBm
Maximum Power per Port
Impedance
Lightning Protection
MHz
806-896
dBi
deg
deg
deg
dB
dB
dB
16.3
870-960
45
16.7
65
10.0
0/0, 6/6
> 18(0o), > 16(6o)
> 25
> 17
1.5:1
> 28 / > 40
< -150
500
50
Direct Ground
dB
dBc
W
1710-2170
17.5
5.5
250
Mechanical
Dimensions, HxWxD
Weight, without Mounting Kit
Weight, with Mounting Kit
Radome Material and Color
Mounting Kit
Connector Type and Location
Operational Temperature
Operational Humidity
Operational Wind Speed
Shipping Dimensions, HxWxD
Shipping Weight
mm (in)
kg (lb)
kg (lb)
1975x265x145 (77.8x10.4x5.7)
18 (39.7)
24 (52.9)
UV Resistant PVC, Light Grey
00-ZJ10(14)
4x7/16 DIN-Female, Bottom
-40 to +60
95
150 (93.2)
2285x375x275 (90.0x14.8x10.8)
30 (66.1)
C
%
km/h (mph)
mm (in)
kg (lb)
Antenna Pattern
Vertical
pattern
Horizontal
pattern
870MHz @ 0o
1710MHz @ 0o
37
1880MHz @ 0o
Issued: Nov12
Control: 3-0-3
1/1
Technical Specifications
Electrical
Frequency Range
MHz
Polarization
Gain
Horizontal Beamwidth
Vertical Beamwidth
Electrical Downtilt Range
dBi
deg
deg
deg
dB
Front-To-Back Ratio
Cross-polar Discrimination @ 0o
VSWR
Isolation Between Ports / Bands
3rd Order Intermodulation @ 2x43 dBm
Maximum Power per Port
Impedance
Lightning Protection
dB
dB
790896
880960
13.5
68
18.6
14.0
65
17
17101880
45
16.6
65
8.2
0-20
17(0o),16(7o)
15(14o),
13(20o)
18501990
19202170
16.8
64
7.6
0-10
16.8
63
7.2
18(0o),
16(5o),14(10o)
25
> 17
< 1.5:1
28 / 33
< -150
dB
dBc
W
500
300
50
Direct Ground
Mechanical
Dimensions, HxWxD
Weight, without Mounting Kit
Weight, with Mounting Kit
Radome Material and Color
Mounting Kit
Connector Type and Location
Operational Temperature
Operational Humidity
Operational Wind Speed
Shipping Dimensions, HxWxD
Shipping Weight
mm (in)
kg (lb)
kg (lb)
1200x265x145 (47.2x10.4x5.7)
16 (35.3)
22 (48.5)
Fiberglass, Light Grey
SJA-B-12R(16)
4x7/16 DIN-Female, Bottom
-50 to +70
95
150 (93.2)
1505x375x280 (59.3x14.8x11.0)
26 (57.3)
C
%
km/h (mph)
mm (in)
kg (lb)
Antenna Pattern
Vertical
pattern
Horizontal
pattern
900MHz @ 0o
1710MHz @ 0o
38
1920MHz @ 0o
Issued: Nov12
Control: 0-0-0
1/1
Technical Specifications
Electrical
Frequency Range
MHz
Polarization
Gain
Horizontal Beamwidth
Vertical Beamwidth
Electrical Downtilt Range
dBi
deg
deg
deg
dB
dB
Front-To-Back Ratio
Cross-polar Discrimination @ 0o
Cross-polar Discrimination @ 60o
VSWR
Isolation Between Ports / Bands
3rd Order Intermodulation @ 2x43 dBm
Maximum Power per Port
Impedance
Lightning Protection
dB
dB
dB
dB
dBc
W
790896
880960
14.5
68
14
15.0
65
13
0-20
18(0o),17(7o),
16 (14o),14(20o)
17101880
45
17.4
65
6.6
18501990
19202170
17.6
64
6.2
0-10
17.7
63
5.8
18(0o),17(5o),16(10o)
17(0o),16(7o),
17(0o),15(5o),12(10o)
15(14o),12(20o)
> 25(total power)
18
10(typ.)
< 1.5:1
> 28 / > 33
< -150
500
300
50
Direct Ground
Mechanical
Dimensions, HxWxD
Weight, without Mounting Kit
Weight, with Mounting Kit
Radome Material and Color
Mounting Kit
Connector Type and Location
Operational Temperature
Operational Humidity
Operational Wind Speed
Shipping Dimensions, HxWxD
Shipping Weight
mm (in)
kg (lb)
kg (lb)
1515x265x145 (59.6x10.4x5.7)
19.2 (42.3)
25.7 (56.7)
Fiberglass, Light Grey
00-ZJ10(12)
4x7/16 DIN-Female, Bottom
-50 to +70
95
150 (93.2)
1825x375x275 (71.9x14.8x10.8)
29 (63.9)
C
%
km/h (mph)
mm (in)
kg (lb)
Antenna Pattern
Vertical
pattern
Horizontal
pattern
900MHz @ 0o
1920MHz @ 0o
39
2170MHz @ 0o
Issued:Nov12
Control: 0-0-0
1/1
Technical Specifications
Electrical
Frequency Range
MHz
Polarization
Gain
Horizontal Beamwidth
Vertical Beamwidth
Electrical Downtilt Range
dBi
deg
deg
deg
dB
dB
Front-To-Back Ratio
Cross-polar Discrimination @ 0o
Cross-polar Discrimination @ 60o
VSWR
Isolation Between Ports / Bands
3rd Order Intermodulation @ 2x43 dBm
Maximum Power per Port
Impedance
Lightning Protection
dB
dB
dB
dB
dBc
W
790896
880960
16.2
68
10
16.7
65
9.3
17101880
45
17.4
65
6.6
18501990
19202170
17.6
17.7
64
63
6.2
5.8
0-10
0-10
18(0o),
18(0o),
16(5o),16(10o)
17(5o),16(10o)
16(0o),
15(0o),
o
o
14(5 ),14(10 )
14(5o),10(10o)
> 25(total power)
18
10
< 1.5:1
> 28 / > 33
< -150
500
300
50
Direct Ground
Mechanical
Dimensions, HxWxD
Weight, without Mounting Kit
Weight, with Mounting Kit
Radome Material and Color
Mounting Kit
Connector Type and Location
Operational Temperature
Operational Humidity
Operational Wind Speed
Shipping Dimensions, HxWxD
Shipping Weight
mm (in)
kg (lb)
kg (lb)
1975x265x145 (77.8x10.4x5.7)
23.5 (51.8) ,
30 (66.1),
Fiberglass, Light Grey
00-ZJ10(14)
4x7/16 DIN-Female, Bottom
-50 to +70
95
150 (93.2)
2280x375x275 (89.8x14.8x10.8)
35.5 (78.3) ,
C
%
km/h (mph)
mm (in)
kg (lb)
Antenna Pattern
Vertical
pattern
Horizontal
pattern
820MHz @ 00
1850MHz @ 00
40
2170MHz @ 00
Issued: Nov12
Control: 0-0-0
1/1
Technical Specifications
Electrical
Frequency Range
MHz
Polarization
Gain
Horizontal Beamwidth
Vertical Beamwidth
Electrical Downtilt Range
dBi
deg
deg
deg
dB
dB
Front-To-Back Ratio
Cross-polar Discrimination @ 0o
Cross-polar Discrimination @ 60o
VSWR
Isolation Between Ports / Bands
3rd Order Intermodulation @ 2x43 dBm
Maximum Power per Port
Impedance
Lightning Protection
dB
dB
dB
dB
dBc
W
790896
880960
16.2
68
10
16.7
65
9.3
17101880
45
17.4
65
6.6
18501990
19202170
17.6
17.7
64
63
6.2
5.8
0-10
0-10
18(0o),
18(0o),
16(5o),16(10o)
17(5o),16(10o)
16(0o),
15(0o),
o
o
14(5 ),14(10 )
14(5o),10(10o)
> 25(total power)
18
10
< 1.5:1
> 28 / > 33
< -150
500
300
50
Direct Ground
Mechanical
Dimensions, HxWxD
Weight, without Mounting Kit
Weight, with Mounting Kit
Radome Material and Color
Mounting Kit
Connector Type and Location
Operational Temperature
Operational Humidity
Operational Wind Speed
Shipping Dimensions, HxWxD
Shipping Weight
mm (in)
kg (lb)
kg (lb)
1975x265x145 (77.8x10.4x5.7)
22.0 (48.5) ,
28.5 (62.8),
UV Resistant PVC, Light Grey
00-ZJ10(14)
4x7/16 DIN-Female, Bottom
-40 to +60
95
150 (93.2)
2280x375x275 (89.8x14.8x10.8)
34.0 (75.0) ,
C
%
km/h (mph)
mm (in)
kg (lb)
Antenna Pattern
Vertical
pattern
Horizontal
pattern
820MHz @ 00
1850MHz @ 00
41
2170MHz @ 00
Issued: Nov12
Control: 0-0-1
1/1
Technical Specifications
Electrical
Frequency Range
MHz
Polarization
Gain
Horizontal Beamwidth
Vertical Beamwidth
Electrical Downtilt Range
dBi
deg
deg
deg
dB
Front-To-Back Ratio
Cross-polar Discrimination @ 0o
Cross-polar Discrimination @ 60o
VSWR
Isolation Between Ports / Bands
3rd Order Intermodulation @ 2x43 dBm
Maximum Power per Port
Impedance
Lightning Protection
dB
dB
dB
dB
dBc
W
790896
880960
16.8
68
8.0
17.3
65
7.5
0-10
17101880
45
17.4
65
6.6
18501990
19202170
17.6
64
6.2
0-10
17.7
63
5.8
17(0o),17(5o),
18(0o),17(5o),16(10o)
15(10o)
> 25(total power)
18
10
< 1.5:1
> 28 / > 33
< -150
500
300
50
Direct Ground
Mechanical
Dimensions, HxWxD
Weight, without Mounting Kit
Weight, with Mounting Kit
Radome Material and Color
Mounting Kit
Connector Type and Location
Operational Temperature
Operational Humidity
Operational Wind Speed
Shipping Dimensions, HxWxD
Shipping Weight
mm (in)
kg (lb)
kg (lb)
2515x265x145 (99.0x10.4x5.7)
26 (57.3)
32.5 (71.7)
Fiberglass, Light Grey
00-ZJ10(08)
4x7/16 DIN-Female, Bottom
-50 to +70
95
150 (93.2)
2830x375x275 (111.4x14.8x10.8)
39 (86.0)
C
%
km/h (mph)
mm (in)
kg (lb)
Antenna Pattern
Vertical
pattern
Horizontal
pattern
900MHz @ 0o
1795MHz @ 2o
42
1990MHz @ 2o
Issued: Nov12
Control: 0-0-0
1/1
Technical Specifications
Electrical
Frequency Range
MHz
Polarization
Gain
Horizontal Beamwidth
Vertical Beamwidth
Electrical Downtilt Range
dBi
deg
deg
deg
dB
Front-To-Back Ratio
Cross-polar Discrimination @ 0o
Cross-polar Discrimination @ 60o
VSWR
Isolation Between Ports / Bands
3rd Order Intermodulation @ 2x43 dBm
Maximum Power per Port
Impedance
Lightning Protection
dB
dB
dB
dB
dBc
W
790896
880960
16.8
68
8.0
17.3
65
7.5
0-10
17101880
45
17.4
65
6.6
18501990
19202170
17.6
64
6.2
0-10
17.7
63
5.8
17(0o),17(5o),
18(0o),17(5o),16(10o)
15(10o)
> 25(total power)
18
10
< 1.5:1
> 28 / > 33
< -150
500
300
50
Direct Ground
Mechanical
Dimensions, HxWxD
Weight, without Mounting Kit
Weight, with Mounting Kit
Radome Material and Color
Mounting Kit
Connector Type and Location
Operational Temperature
Operational Humidity
Operational Wind Speed
Shipping Dimensions, HxWxD
Shipping Weight
mm (in)
kg (lb)
kg (lb)
2515x265x145 (99.0x10.4x5.7)
24 (52.9)
30.5 (67.2)
UV Resistant PVC , Light Grey
00-ZJ10(08)
4x7/16 DIN-Female, Bottom
-40 to +60
95
150 (93.2)
2830x375x275 (111.4x14.8x10.8)
37 (81.6)
C
%
km/h (mph)
mm (in)
kg (lb)
Antenna Pattern
Vertical
pattern
Horizontal
pattern
900MHz @ 0o
1795MHz @ 2o
43
1990MHz @ 2o
Issued: Nov12
Control: 0-0-3
1/1
Technical Specifications
Electrical
Frequency Range
MHz
Polarization
Gain
Horizontal Beamwidth
Vertical Beamwidth
Electrical Downtilt Range
dBi
deg
deg
deg
dB
Front-To-Back Ratio
VSWR
Isolation Between Ports
Cross-polar Discrimination @ 0o
3rd Order Intermodulation @ 2x43 dBm
Maximum Power per Port
Impedance
Lightning Protection
dB
dB
dB
dBc
W
790896
880960
14.5
67
15
14.8
63
13.5
17101850
45
16.8
67
6.5
19202170
24902690
17.3
18.0
65
60
5.8
4.5
0-14
0-10
>17(0o), >16(7o),
>17(0o),
> 15(14o)
>15(5o), >14(10o)
> 25
1.5:1
> 28 / >30
> 18 (typ.)
< -150
500
250
50
Direct Ground
Mechanical
Dimensions, HxWxD
Weight, without Mounting Kit
Weight, with Mounting Kit
Radome Material and Color
Mounting Kit
Connector Type and Location
Operational Temperature
Operational Humidity
Operational Wind Speed
Shipping Dimensions, HxWxD
Shipping Weight
mm (in)
kg (lb)
kg (lb)
1570x320x145 (61.8x12.6x5.7)
23 (50.7)
28.5 (62.8)
Fiberglass, Light Grey
00-ZJ10
4x7/16 DIN-Female, Bottom
-50 to +70
95
150 (93.2)
1920x430x280 (75.6x16.9x11.0)
35 (77.2)
C
%
km/h (mph)
mm (in)
kg (lb)
Antenna Pattern
Vertical
pattern
Horizontal
pattern
790MHz @ 0o
1850MHz @ 0o
44
2690MHz @ 0o
Issued: Nov12
Control: 0-0-2
1/1
Technical Specifications
Electrical
Frequency Range
MHz
Polarization
Gain
Horizontal Beamwidth
Vertical Beamwidth
Electrical Downtilt Range
dBi
deg
deg
deg
dB
dB
dB
dB
dBc
W
790896
880960
15.8
66
10
16.3
63
9.5
17101990
45
16.8
67
6.5
19202170
24902690
17.3
18.0
65
60
5.8
4.5
0-10
0-10
18(0 o),
>17(0o),
17(5o),16(10 o)
>15(5o), >14(10o)
15
14
> 25
> 18 (typ.)
1.5:1
> 28 / > 30
< -150
500
250
50
Direct Ground
Mechanical
Dimensions, HxWxD
Weight, without Mounting Kit
Weight, with Mounting Kit
Radome Material and Color
Mounting Kit
Connector Type and Location
Operational Temperature
Operational Humidity
Operational Wind Speed
Shipping Dimensions, HxWxD
Shipping Weight
mm (in)
kg (lb)
kg (lb)
1995x320x145 (78.5x12.6x5.7)
28 (61.6)
33.5 (73.7)
Fiberglass, Light Grey
00-ZJ11
4x7/16 DIN-Female, Bottom
-50 to +70
95
150 (93.2)
2350x430x270 (92.5x16.9x10.6)
40 (88.0)
C
%
km/h (mph)
mm (in)
kg (lb)
Antenna Pattern
Vertical
pattern
Horizontal
pattern
790MHz @ 0o
1850MHz @ 0o
45
2690MHz @ 0o
Issued: Nov12
Control: 0-0-2
1/1
Technical Specifications
Electrical
Frequency Range
MHz
Polarization
Gain
Horizontal Beamwidth
Vertical Beamwidth
Electrical Downtilt Range
dBi
deg
deg
deg
dB
dB
dB
dB
dB
dBc
W
790896
880960
16.6
67
7.2
17.3
63
6.7
17101990
45
16.8
67
6.5
19202170
24902690
17.3
18.0
65
60
5.8
4.5
0-10
0-10
18(0 o),17(5 o),
18(0 o), 17(5 o),
16(10 o)
16(10 o)
15
14
> 25
18(typ.)
< 1.5:1
> 28 / > 30
< -150
500
250
50
Direct Ground
Mechanical
Dimensions, HxWxD
Weight, without Mounting Kit
Weight, with Mounting Kit
Radome Material and Color
Mounting Kit
Connector Type and Location
Operational Temperature
Operational Humidity
Operational Wind Speed
Shipping Dimensions, HxWxD
Shipping Weight
mm (in)
kg (lb)
kg (lb)
C
%
km/h (mph)
mm (in)
kg (lb)
2750x320x145
32 (70.5)
42.5 (93.7)
Fiberglass, Light Grey
00-ZJ11(08)
4x7/16 DIN-Female, Bottom
-50 to +70
95
150 (93.2)
3105x430x270 (122.2x16.9x10.6)
49 (108)
Antenna Pattern
Vertical
pattern
Horizontal
pattern
790MHz @ 0o
1850MHz @ 0o
46
2500MHz @ 0o
Issued: Nov12
Control: 0-0-3
1/1
ODV2-065R18K-G
Technical Specifications
Electrical
Frequency Range
Polarization
Gain
Horizontal Beamwidth
Vertical Beamwidth
Electrical Downtilt Range
First Upper Sidelobe Suppression
Front-To-Back Ratio
Cross-polar Discrimination @ 0o
Cross-polar Discrimination @ 60o
VSWR
Isolation Between Ports
3rd Order Intermodulation @ 2x43 dBm
Maximum Power Per Port
Impedance
Lightning Protection
MHz
dBi
deg
deg
deg
dB
dB
dB
dB
dB
dBc
W
1710-1880
1850-1990
1920-2170
45
17.5
17.7
18.0
67
65
63
7.2
6.8
6.4
0-10 / 0-10
>20(0o), >17(5o), >16(10o)
25(total power)
> 18
> 10(typ.)
1.5:1
> 30
< -150
300
50
Direct Ground
Mechanical
Dimensions, HxWxD
Weight, without mounting Kit
Weight, with mounting Kit
Radome Material and Color
Mounting Kit
Connector Type and Location
Operational Temperature
Operational Humidity
Operational Wind Speed
Shipping Dimensions, HxWxD
Shipping Weight
mm (in)
kg (lb)
kg (lb)
1315x265x90 (51.8x10.4x3.5)
15.5 (34.2)
20.5 (45.2)
Fiberglass, Light Grey
SJA-B-12R(16)
4x7/16 DIN-Female, Bottom
-50 to +70
95
150 (93.2)
1595x375x215 (62.8x14.8x8.5)
25.0 (55.1)
C
%
km/h (mph)
mm (in)
kg (lb)
Antenna Pattern
Vertical
pattern
Horizontal
pattern
1710MHz @ 0o
1990MHz @ 0o
47
2170MHz @ 0o
Issued: Nov12
Control: 0-0-2
1/1
ODV2-065R18K
Technical Specifications
Electrical
Frequency Range
Polarization
Gain
Horizontal Beamwidth
Vertical Beamwidth
Electrical Downtilt Range
First Upper Sidelobe Suppression
Front-To-Back Ratio
Cross-polar Discrimination @ 0o
Cross-polar Discrimination @ 60o
VSWR
Isolation Between Ports
3rd Order Intermodulation @ 2x43 dBm
Maximum Power Per Port
Impedance
Lightning Protection
MHz
dBi
deg
deg
deg
dB
dB
dB
dB
dB
dBc
W
1710-1880
1850-1990
1920-2170
45
17.5
17.7
18.0
67
65
63
7.2
6.8
6.4
0-10 / 0-10
>20(0o), >17(5o), >16(10o)
25(total power)
> 18
> 10(typ.)
1.5:1
> 30
< -150
300
50
Direct Ground
Mechanical
Dimensions, HxWxD
Weight, without Mounting Kit
Weight, with Mounting Kit
Radome Material and Color
Mounting Kit
Connector Type and Location
Operational Temperature
Operational Humidity
Operational Wind Speed
Shipping Dimensions, HxWxD
Shipping Weight
mm (in)
kg (lb)
kg (lb)
1315x300x86 (51.8x11.8x3.4)
14.5 (32.0)
19.5 (43.0)
UV Resistant PVC, Light Grey
SJA-B-12R(16)
4x7/16 DIN-Female, Bottom
-40 to +60
95
150 (93.2)
1595x415x215 (62.8x16.3x8.5)
24 (52.9)
C
%
km/h (mph)
mm (in)
kg (lb)
Antenna Pattern
Vertical
pattern
Horizontal
pattern
1710MHz @ 0o
1990MHz @ 0o
48
2170MHz @ 0o
Issued: Nov12
Control: 0-0-2
1/1
ODV2-065R18J-G
Technical Specifications
Electrical
Frequency Range
MHz
Polarization
Gain
Horizontal Beamwidth
Vertical Beamwidth
Electrical Downtilt Range
dBi
deg
deg
deg
dB
dB
dB
dB
dB
dBc
W
17101880
18501990
1920230024902170
2500
2690
45
16.8
17.2
17.4
17.7
17.6
68
66
65
63
64
7.4
7.0
6.6
5.6
5.2
012 / 0-12
18(0 o),16(6 o),
17(0 o),16(6 o),
15(12 o)
15(12 o)
15
14
> 25
18 (typ.)
< 1.5:1
> 28
< -150
250
50
Direct Ground
Mechanical
Dimensions, HxWxD
Weight, without Mounting Kit
Weight, with Mounting Kit
Radome Material and Color
Mounting Kit
Connector Type and Location
Operational Temperature
Operational Humidity
Operational Wind Speed
Shipping Dimensions, HxWxD
Shipping Weight
mm (in)
kg (lb)
kg (lb)
1330x300x86 (52.4x11.8x3.4)
19.5 (42.9)
24.5 (53.9)
Fiberglass, Light Grey
SJA-B-12R(16)
4x7/16 DIN-Female, Bottom
-50 to +70
95
150 (93.2)
1615x415x215 (63.6x16.3x8.5)
31.5 (69.3)
C
%
km/h (mph)
mm (in)
kg (lb)
Antenna Pattern
Vertical
pattern
Horizontal
pattern
1710MHz @ 2
1920MHz @ 2
49
2500MHz @ 2
Issued: Nov12
Control: 0-0-7
1/1
ODV2-065R18J
Technical Specifications
Electrical
Frequency Range
MHz
Polarization
Gain
Horizontal Beamwidth
Vertical Beamwidth
Electrical Downtilt Range
dBi
deg
deg
deg
dB
dB
dB
dB
dB
dBc
W
17101880
18501990
1920230024902170
2500
2690
45
16.8
17.2
17.4
17.7
17.6
68
66
65
63
64
7.4
7.0
6.6
5.6
5.2
012 / 0-12
18(0 o),16(6 o),
17(0 o),16(6 o),
15(12 o)
15(12 o)
15
14
> 25
18(typ.)
< 1.5:1
> 28
< -150
250
50
Direct Ground
Mechanical
Dimensions, HxWxD
Weight, without Mounting Kit
Weight, with Mounting Kit
Radome Material and Color
Mounting Kit
Connector Type and Location
Operational Temperature
Operational Humidity
Operational Wind Speed
Shipping Dimensions, HxWxD
Shipping Weight
mm (in)
kg (lb)
kg (lb)
1330x300x86 (52.4x11.8x3.4)
18 (39.7)
23 (50.7)
UV Resistant PVC, Light Grey
SJA-B-12R(16)
4x7/16 DIN-Female, Bottom
-40o +60
95
150 (93.2)
1615x415x215 (63.6x16.3x8.5)
30 (66.1)
C
%
km/h (mph)
mm (in)
kg (lb)
Antenna Pattern
Vertical
pattern
Horizontal
pattern
1710MHz @ 2
1990MHz @ 2
50
2500MHz @ 2
Issued: Nov12
Control: 0-0-7
1/1
Technical Specifications
Electrical
Frequency Range
MHz
Polarization
Gain
Horizontal Beamwidth
Vertical Beamwidth
Electrical Downtilt Range
deg
dBi
deg
deg
deg
dB
Front-To-Back Ratio
Cross-polar Discrimination @ 0
VSWR
Isolation Between Ports
3rd Order Intermodulation @ 2x43 dBm
Maximum Power per Port
Impedance
Lightning Protection
dB
dB
dB
dBc
W
806896
870960
15.0
65
14
13.5
0-14
17101880
18501990
45
19202170
23002500
15.0
67
14
15.2
65
13.7
15.5
63
13.5
0-12/0-12
61
12
17(0),
16(7),
15(14)
24902690
15.0
60
11
> 28
> 25
< -150
500
250
50
Direct Ground
Mechanical
Dimensions, HxWxD
Weight, without Mounting Kit
Weight, with Mounting Kit
Radome Material and Color
Mounting Kit
Connector Type and Location
Operational Temperature
Operational Humidity
Operational Wind Speed
Shipping Dimensions, HxWxD
Shipping Weight
mm (in)
kg (lb)
kg (lb)
1415x335x145 (55.7x13.2x5.6)
19.5 (43.0)
25 (55.1)
UV Resistant PVC, Light Grey
00-ZJ10(16)
6x7/16 DIN-Female, Bottom
-40 to +60
95
150 (93.2)
1740x450x270 (68.5x17.7x10.6)
29 (63.9)
C
%
km/h (mph)
mm (in)
kg (lb)
Antenna Pattern
Vertical
pattern
Horizontal
pattern
896MHz @ 2o
1990MHz @ 2o
51
2300MHz @ 2o
Issued: Nov12
Control: 1-0-0
1/1
ODV-065R18EKK-G
Technical Specifications
Electrical
Frequency Range
MHz
Polarization
deg
790896
880960
45
Top
Gain
Bottom
Horizontal Beamwidth
Vertical Beamwidth
Electrical Downtilt Range
dBi
16.8
17.5
deg
deg
deg
68
8
65
7.5
dB
Front-To-Back Ratio
Cross-polar Discrimination @ 0o
Cross-polar Discrimination @ 60o
VSWR
Isolation Between Ports / Bands
3rd Order Intermodulation @ 2x43 dBm
Maximum Power per Port
Impedance
Lightning Protection
dB
dB
dB
dB
dBc
W
17101880
17.2
17.4
65
6.8
185019201990
2170
Quad 45
17.4
17.5
17.6
17.7
64
63
6.2
5.8
0-10 / 0-10
0-10
18(0o), 16(5o),
18(0o), 17(5o), 16(10o)
16(10o)
> 25(total power)
18
10
1.5:1
> 28 / > 33
< -150
500
300
50
Direct Ground
Mechanical
Dimensions, HxWxD
Weight, without Mounting Kit
Weight, with Mounting Kit
Radome Material and Color
Mounting Kit
Connector Type and Location
Operational Temperature
Operational Humidity
Operational Wind Speed
Shipping Dimensions, HxWxD
Shipping Weight
mm (in)
kg (lb)
kg (lb)
2730x265x145 (107.5x10.4x5.7)
34.0 (75.0)
42.5 (93.7)
Fiberglass, Light Grey
00-ZJ11(00)
6x7/16 DIN-Female, Bottom
-50 to +70
95
150 (93.2)
3045x375x275 (120.0x14.8x10.8)
48.5 (106.9)
C
%
km/h (mph)
mm (in)
kg (lb)
Antenna Pattern
Vertical
pattern
Horizontal
pattern
900MHz @ 0o
1795MHz @ 0o
52
1990MHz @ 0o
Issued: Nov12
Control: 0-0-2
1/1
Technical Specifications
Electrical
Frequency Range
MHz
Polarization
Gain
Horizontal Beamwidth
Vertical Beamwidth
Electrical Downtilt Range
deg
dBi
deg
deg
deg
dB
dB
dB
dB
790896
880960
14.5
15.0
65
14
0-14
>17(0),
>16(7),
>15(14)
15
dB
dBc
W
500
17101990
45
17.2
67
7.3
19202170
24902690
17.5
17.7
65
61
6.5
5.3
0-12 / 0-12
>16(0o),
>18(0o),
>16(6o),
>15(6o),
>15(12o)
>14(12o)
14
> 25
18(typ.)
1.5:1
> 28 / > 30
< -150
250
50
Direct Ground
Mechanical
Dimensions, HxWxD
Weight, without Mounting Kit
Weight, with Mounting Kit
Radome Material and Color
Mounting Kit
Connector Type and Location
Operational Temperature
Operational Humidity
Operational Wind Speed
Shipping Dimensions, HxWxD
Shipping Weight
mm (in)
kg (lb)
kg (lb)
1415x500x140 (55.7x19.7x5.5)
32 (70.5)
37 (81.6)
Fiberglass, Light Grey
00-ZJ11
6x7/16 DIN-Female, Bottom
-50 to +70
95
150 (93.2)
1705x635x305 (67.1x25x12)
43 (90.2)
C
%
km/h (mph)
mm (in)
kg (lb)
Antenna Pattern
Vertical
pattern
Horizontal
pattern
790MHz @ 0
1850MHz @ 4
53
2500MHz @ 4
Issued: Nov2
Control: 0-0-6
1/1
ODV-065R17EJJ-G
Technical Specifications
Electrical
Frequency Range
MHz
Polarization
Gain
Top
Bottom
dBi
Horizontal Beamwidth
Vertical Beamwidth
Electrical Downtilt Range
deg
deg
deg
dB
dB
dB
dB
dB
dBc
W
790896
880960
17101990
192024902170
2690
45
Quad 45
16.3
15.7
16.0
15.8
16.3
16.2
16.5
16.8
67
64
66
64
61
10
9.5
8.5
8.0
6.3
0-10
0-12 / 0-12
18(0 o),
18(0 o), 17(6 o),
17(5o),16(10 o)
16(12 o)
15
14
> 25(typ.)
18(typ.)
< 1.5:1
> 28 / > 30
< -150
500
250
200
50
Direct Ground
Mechanical
Dimensions, HxWxD
Weight, without Mounting Kit
Weight, with Mounting Kit
Radome Material and Color
Mounting Kit
Connector Type and Location
Operational Temperature
Operational Humidity
Operational Wind Speed
Shipping Dimensions, HxWxD
Shipping Weight
mm (in)
kg (lb)
kg (lb)
1995x320x145 (78.5x12.6x5.7)
31.0 (68.3)
36.5 (80.5)
Fiberglass, Light Grey
00-ZJ11(08)
6x7/16 DIN-Female, Bottom
-50 to +70
95
150 (93.2)
2350x430x270 (92.5x16.9x10.6)
42 (92.6)
C
%
km/h (mph)
mm (in)
kg (lb)
Antenna Pattern
Vertical
pattern
Horizontal
pattern
790MHz @ 2o
1850MHz @ 2o
54
2690MHz @ 2o
Issued: Nov12
Control: 0-0-6
1/1
ODV-065R18EJJ-G
Technical Specifications
Electrical
Frequency Range
MHz
Polarization
Top
Bottom
Gain
dBi
Horizontal Beamwidth
Vertical Beamwidth
Electrical Downtilt Range
deg
deg
deg
dB
dB
dB
dB
dB
dBc
W
790896
880960
17101990
192024902170
2690
45
Quad 45
16.2
16.7
17.1
16.6
17.3
16.7
17.2
17.6
67
63
67
65
61
7
6.5
7.2
6.6
5.2
0-10
0-12
18(0 o),17(5 o),
17(0 o),16(6 o),
16(10 o)
15(12 o)
15
14
> 25
18(typ.)
< 1.5:1
> 28 / > 30
< -150
500
250
50
Direct Ground
Mechanical
Dimensions, HxWxD
Weight, without Mounting Kit
Weight, with Mounting Kit
Radome Material and Color
Mounting Kit
Connector Type and Location
Operational Temperature
Operational Humidity
Operational Wind Speed
Shipping Dimensions, HxWxD
Shipping Weight
mm (in)
kg (lb)
kg (lb)
2750x320x145 (108.3x12.6x5.7)
37 (81.6)
47.5 (104.5)
Fiberglass, Light Grey
00-ZJ11(08)
6x7/16 DIN-Female, Bottom
-50 to +70
95
150 (93.2)
3105x430x270 (122.2x16.9x10.6)
53.5 (117.7)
C
%
km/h (mph)
mm (in)
kg (lb)
Antenna Pattern
Vertical
pattern
Horizontal
pattern
790MHz @ 0o
2170MHz @ 0o
55
2500MHz @ 0o
Issued: Nov12
Control: 0-0-4
1/1
Technical Specifications
Electrical
Frequency Range
MHz
790896
880960
Polarization
Gain
Horizontal Beamwidth
Vertical Beamwidth
Electrical Downtilt Range
deg
dBi
deg
deg
deg
14.5
69
14
15.0
67
13
dB
Front-To-Back Ratio
Cross-polar Discrimination @ 0o
VSWR
Isolation Between Ports/ Bands
3rd Order Intermodulation @ 2x43 dBm
Maximum Power per Port
Impedance
Lightning Protection
dB
dB
dB
dBc
W
17101880
45
17.4
66
6.6
18501990
19202170
17.6
17.7
65
60
6.2
5.8
0-20
0-10
18(0o),17(7o),
18(0o),
16(14o),15(20o)
16(5o), 15(10o)
> 25
> 17
1.5:1
> 28 / > 28
< -150
500
300
50
Direct Ground
Mechanical
Dimensions, HxWxD
Weight, without Mounting Kit
Weight, with Mounting Kit
Radome Material and Color
Mounting Kit
Connector Type and Location
Operational Temperature
Operational Humidity
Operational Wind Speed
Shipping Dimensions, HxWxD
Shipping Weight
mm (in)
kg (lb)
kg (lb)
1515x500x140 (59.6x19.7x5.5)
38 (83.8)
46 (101.4)
Fiberglass, Light Grey
00-ZJ11(12)
8x7/16 DIN-Female, Bottom
-50 to +70
95
150 (93.2)
1850x635x305 (72.8x25x12)
53 (117.0)
C
%
km/h (mph)
mm (in)
kg (lb)
Antenna Pattern
Vertical
pattern
Horizontal
pattern
900MHz @ 0o
1795MHz @ 0o
56
1990MHz @ 0o
Issued: Nov12
Control: 0-0-1
1/1
Technical Specifications
Electrical
Frequency Range
Polarization
Gain
Horizontal Beamwidth
Vertical Beamwidth
Front-To-Back Ratio
VSWR
Maximum Power
Impedance
MHz
1710-1880
dBi
deg
deg
dB
W
1850-1990
Vertical
13.5
30
30
> 24
1.6:1
100
50
1920-2170
Mechanical
Dimensions, HxWxD
Weight, without Mounting Kit
Weight, with Mounting Kit
Radome Material and Color
Mounting Kit
Connector Type and Location
Operational Temperature
Operational Humidity
Operational Wind Speed
Shipping Dimensions, HxWxD
Shipping Weight
mm (in)
kg (lb)
kg (lb)
280x280x50 (11.0x11.0x2.0)
1.5 (3.3)
1.7 (3.7)
ABS, White
Pipe mount included
TNC or N, Rear
-40 to +60
95
150 (93.2)
290x280x120 (11.4x11.0x4.7)
2.1 (4.6)
C
%
km/h (mph)
mm (in)
kg (lb)
Antenna Pattern
Vertical
pattern
Horizontal
pattern
1710MHz
1990MHz
57
2170MHz
Issued: Nov12
Control: 3-0-4
1/1
O
Outdoor
D
Direction
nal Anten
nna for Microcell
M
O
ODM-030V
V18B0
VPol, 824
4-960MHz, 30,
3
18dBi
T
Technica
l Specific
cations
E
Electrical
l
Frequency Range
F
P
Polarization
G
Gain
H
Horizontal
Bea
amwidth
V
Vertical
Beamwidth
F
Front-To-Back
k Ratio
V
VSWR
M
Maximum
Pow
wer
I
Impedance
L
Lightning
Prottection
MHz
824--960
Verttical
18
8
30
0
14
4
> 33
3
1..4:1
20
00
50
0
Direct Ground
G
dBi
deg
deg
dB
W
M
Mechanic
cal
Dimensions, HxWxD
D
H
(with reflector)
r
W
Weight,
without Mounting Kit
K
W
Weight,
with Mounting
M
Kit
R
Radome
Material and Colorr
M
Mounting
Kit
C
Connector
Typ
pe and Locatio
on
O
Operational
Te
emperature
O
Operational
Humidity
O
Operational
W
Wind
Speed
S
Shipping
Dime
ensions
Antenna
a
S
Shipping
Weig
ght
Reflecto
or
mm (in)
kg (lb)
kg (lb)
1251
1x796x474 (4
49.3x31.3x18..7)
20 (44
4.1)
25 (55
5.1)
PVC, Ligh
ht Grey
SJA-B-12
2R(16)
N-Female,, Bottom
-30 to +55
95
150 (9
93.2)
1480
0x335x305 (5
58.3x13.2x12..0)
27 (59
9.5)
8 (17
7.6)
C
%
km/h (mph)
mm (in)
kg (lb)
A
Antenna
Pattern
Vertical
pattern
Horizontal
pattern
870MHz
824MHz
Information con
ntained in this document
d
is sub
bject to confirma
ation at time of ordering.
o
http://www.com
mba-telecom.com
58
960MHz
Issued: Nov12
2
Control: 3-2-2
1/1
Technical Specifications
Electrical
Frequency Range
Polarization
Gain
Horizontal Beamwidth
Vertical Beamwidth
Front-To-Back Ratio
VSWR
Maximum Power
Impedance
Lightning Protection
MHz
790-960
dBi
deg
deg
dB
9.7
75
58
1710-2500
Vertical
11.0
68
48
> 22
1.5:1
100
50
Direct Ground
Mechanical
Dimensions, HxWxD
Weight, without Mounting Kit
Weight, with Mounting Kit
Radome Material and Color
Mounting Kit
Connector Type and Location
Operational Temperature
Operational Humidity
Operational Wind Speed
Shipping Dimensions, HxWxD
Antenna Weight
Shipping
Antenna
mm (in)
kg (lb)
kg (lb)
480x282x54 (18.9x11.1x2.1)
1.5 (3.3)
1.7 (3.7)
PVC, Light Grey
Wall or pole mount included
N-Female, Bottom
-40 to +60
95
150 (93.2)
575x408x158 (22.6x16.1x6.2)
2.0 (4.4)
C
%
km/h (mph)
mm (in)
kg (lb)
Antenna Pattern
Vertical
pattern
Horizontal
pattern
870MHz
1880MHz
59
2500MHz
Issued: Nov 12
Control: 3-1-4
1/1
Technical Specifications
Electrical
Frequency Range
Polarization
Gain
Horizontal Beamwidth
Vertical Beamwidth
First Upper Sidelobe Suppression
Front-To-Back Ratio
VSWR
3rd Order Intermodulation @ 2x43 dBm
Maximum Power
Impedance
Lighting Protection
MHz
1710-1880
dBi
deg
deg
dB
dB
19.5
1850-1990
Vertical
1920-2170
20.0
33
7.5
> 16
> 33(typ. 40)
1.4:1
< -150
100
50
Direct Ground
dBc
W
32
7.0
1.5:1
Mechanical
Dimensions, HxWxD
Weight, without Mounting Kit
Weight, with Mounting Kit
Radome Material and Color
Mounting Kit
Connector Type and Location
Operational Temperature
Operational Humidity
Operational Wind Speed
Shipping Dimensions, HxWxD
Shipping Weight
mm (in)
kg (lb)
kg (lb)
1210x320x110 (47.6x12.6x4.3)
8.5 (18.7)
13 (28.7)
PVC, Light Grey
SJA-B-12R(16)
7/16 DIN-Female, Bottom
-40 to +60
95
150 (93.2)
1495x395x200 (58.9x15.6x7.9)
16 (35.3)
C
%
km/h (mph)
mm (in)
kg (lb)
Antenna Pattern
Vertical
pattern
Horizontal
pattern
1710MHz
1990MHz
60
2170MHz
Issued: Nov12
Control: 3-0-4
1/1
ODP-032V15N
Technical Specifications
Electrical
Frequency Range
MHz
Polarization
Gain
Horizontal Beamwidth
Vertical Beamwidth
Front-To-Back Ratio
1st Upper Sidelobe Suppression
VSWR
Isolation Between Bands
3rd Order Intermodulation @ 2x43 dBm
Maximum Power
Impedance
Lighting Protection
dBi
deg
deg
dB
dB
790896
880960
171019201990
2170
Vertical
10.8
12.5
13.5
40
41
35
38
38
35
> 25
2>
36
> 18
32
>1.5:1
>1.4:1
25
< -150
200
50
Direct Ground
11.0
46
36
dB
dBc
W
23002500
24902690
14.0
27
26
15.0
25
25
100
Mechanical
Dimensions, HxWxD
Weight,
Radome Material and Color
Mounting Kit
Connector Type and Location
Operational Temperature
Operational Humidity
Operational Wind Speed
Shipping Dimensions, HxWxD
Antenna Weight
Shipping
Antenna
mm (in)
kg (lb)
1095x500x140 (43.1x19.7x5.5)
22 (48.5)
Fiberglass, Light Grey
00-ZJ10
27/16 DIN-Female, Bottom
-50 to +70
95
110 (68.31)
1375 x635x290 (54.1x24.8x11.3)
32 (70.6)
C
%
km/h (mph)
mm (in)
kg (lb)
Antenna Pattern
Vertical
pattern
Horizontal
pattern
880MHz @ 0o
1850MHz @ 0o
61
2400MHz @ 0o
Issued: Dec12
Control: 1-0-0
1/1
Technical Specifications
Electrical
Frequency Range
Polarization
Gain
Horizontal Beamwidth
Vertical Beamwidth
Front-To-Back Ratio
VSWR
Maximum Power
Impedance
Lighting Protection
MHz
1710-1880
dBi
deg
deg
dB
11
40
38
1850-1990
Vertical
12.0
1920-2170
12.5
36
32
> 15
1.5:1
100
50
Direct Ground
Mechanical
Dimensions, HxWxD
Weight, without Mounting Kit
Radome Material and Color
Mounting Kit
Connector Type and Location
Operational Temperature
Operational Humidity
Survival Wind Speed
Shipping Dimensions, HxWxD
Shipping Weight
mm(in)
kg
595x150x90 (23.4x5.9x3.5)
0.9 (2.0)
UV Resistant PVC, Light Grey
Pole Mount included
N-Female, Bottom
-40 to +60
95
200 (124.3)
606x161x107 (23.9x6.3x4.2)
1.4 (3.1)
C
%
km/h
mm(in)
kg (lb)
Antenna Pattern
Vertical
pattern
Horizontal
pattern
1710MHz
1920MHz
62
2170MHz
Issued: Nov12
Control: 0-0-2
1/1
Technical Specifications
Electrical
Frequency Range
Polarization
Gain
Horizontal Beamwidth
Vertical Beamwidth
Front-To-Back Ratio
VSWR
Maximum Power
Impedance
Lighting Protection
MHz
806-960
Vertical
13
30
30
> 18
1.5:1
100
50
Direct Ground
dBi
deg
deg
dB
W
Mechanical
Dimensions, HxWxD
Weight, without Mounting Kit
Weight, with Mounting Kit
Mounting Kit
Connector Type
Operational Temperature
Operational Humidity
Survival Wind Speed
Shipping Dimensions, HxWxD
Shipping Weight
mm (in)
kg (lb)
kg (lb)
990x195x105 (39.0x7.8x4.1)
1.25 (2.8)
1.35 (3.0)
Pole Mount included
N-Female
-40 to +60
95
200 (124.3)
1000x200x110 (39.4x15.7x4.3)
1.45 (3.2)
C
%
km/h (mph)
mm (in)
kg (lb)
Antenna Pattern
Vertical
pattern
Horizontal
pattern
830MHz
900MHz
63
960MHz
Issued: Nov12
Control: 0-0-2
1/1
Technical Specifications
Electrical
Frequency Range
Polarization
Gain
Horizontal Beamwidth
Vertical Beamwidth
VSWR
Power Handling
Impedance
MHz
670-800
800-960
1710-2500
Vertical
4.5
75
70
dBi
deg
deg
2.0:1
2500-2700
7.0
60
50
1.5:1
50
50
1.8:1
Mechanical
Dimensions, HxWxD
Weight
Radome Material and Color
Mount
Reflector Material
Radiating Element Material
Connector Type
Environmental Class
Shipping Dimensions, HxWxD
Shipping Weight
mm (in)
kg (lb)
210x180x43 (8.3x7.1x1.7)
0.5 (1.1)
PVC, White
Wall
Aluminum
Printed Circuit Board
N-Female
Indoor
250x190x60 (9.8x7.5x2.4)
0.8 (1.8)
mm (in)
kg (lb)
Antenna Pattern
Vertical
pattern
Horizontal
pattern
870MHz
1880MHz
64
2500MHz
Issued: Jul10
Control: 0-0-1
1/1
Technical Specifications
Electrical
Frequency Range
Polarization
Gain
Horizontal Beamwidth
Vertical Beamwidth
VSWR
3rd Order Intermodulation @ 2x33 dBm
Power Handling
Impedance
MHz
806-960
dBi
deg
deg
7
90
dBc
W
1710-2500
Vertical
8
75
65
1.5:1
-140
100
50
2500-2700
7
65
Mechanical
Dimensions, HxWxD
Weight
Radome Material and Color
Mount
Reflector Material
Radiating Element Material
Connector Type
Environmental Class
Shipping Dimensions, HxWxD
Shipping Weight
mm (in)
kg (lb)
273x173x52 (10.7x6.8x2.0)
0.6 (1.3)
ABS, Light Grey, RAL7035
Wall
Aluminum
Aluminum
N-Female
Indoor
338x221x80 (13.3x8.7x3.1)
0.8 (1.8)
Antenna Pattern
Vertical
pattern
Horizontal
pattern
806MHz
1710MHz
65
2500MHz
Issued: Oct12
Control: 3-0-2
1/1
Technical Specifications
Electrical
Frequency Range
Polarization
Gain
Horizontal Beamwidth
Vertical Beamwidth
VSWR
Power Handling
Impedance
MHz
806-960
1710-2500
Vertical
6
120
100-120
1.5:1
100
50
dBi
deg
deg
W
Mechanical
Dimensions, HxDia
Weight
Radome Material and Color
Mount
Reflector Material
Radiating Element Material
Connector Type
Environmental Class
Shipping Dimensions, HxWxD
Shipping Weight
mm (in)
kg(lb)
170x70 (6.7x2.8)
0.5 (1.1)
PS, Light Grey/ Semi-transparent
Ceiling
Aluminum
Aluminum
N-Female
Indoor
176x176x152 (6.9x6.9x6.0)
0.6 (1.3)
mm (in)
kg (lb)
Antenna Pattern
Vertical
pattern
Horizontal
pattern
1880MHz
2170MHz
66
2500MHz
Issued: Aug09
Control: 3-1-0
1/1
Technical Specifications
Electrical
Frequency Range
MHz
Gain (Peak)
Polarization
Power Handling
dBi
Beamwidth
670-696
696-806
VSWR
3rd Order Intermodulation @ 2x33 dBm
Impedance
17102500
25002700
4
Vertical
100
W
Vertical
Horizontal
806-960
100 - 120
deg
30 - 65
360
< 2.5:1
< 2.0:1
< 1.5:1
dBc
<-150
50
mm(in)
kg(lb)
208x115 (8.2x4.5)
0.4 (0.88)
ABS, white
Ceiling mounted (via handle nut or via 3 screws)
Aluminum
Aluminum
N-Female
Indoor
Mechanical
Dimensions, Diameter x Depth
Weight
Radome Material and Color
Mount
Reflector Material
Radiating Element Material
Connector Type
Environmental Class
Antenna Patterns
Vertical
pattern
Horizontal
pattern
880MHz
1710MHz
2300MHz
2690MHz
Installation Plots
67
Issued: Aug12
Control: 0-0-4
1/1
I
Indoor
Om
mni-dire
ectional Ceiling
C
M
Mounted
Antenna
A
I
IXD-360V
V03NN(U))
VPol, 806
6-960/1710--2700, 360, 2.0/4.0dBi
Technicall Specifica
ations
Electrica
al
Frequency Ra
ange
Gain
Polarization
Power Handliing
Beamwidth
MHz
dBi
806 - 960
0
2.0
1710 - 2500
Verrtical
1
100
W
Verttical
Horizontal
VSWR
3rd Order Inttermodulation
n @ 2x33 dBm
m
Impedance
deg
2
2500 - 2700
4.0
100 - 120
0
30 - 65
360
3
< 1.5:1
1
< -140
5
50
dBc
Mechanic
cal
Dimensions, Diameter x Depth
Weight
Radome Mate
erial and Color
Mount
Reflector Matterial
Radiating Ele
ement Material
Connector Ty
ype
Environmenta
al Class
208x115 (8.2x4.5)
0.4 (0.88)
(
ABS,, white
Ceiling Mounted
Alum
minum
Alum
minum
N-Fe
emale
Ind
door
mm(in)
kg(lb)
Antenna Patterns
Vertical
pattern
Horizontal
pattern
17
710MHz
960MHz
Information contained
c
in this documentt is subject to confirmation at time of ord
dering.
http://www.com
mba-telecom.com
68
2500M
MHz
Issued: June12
Control: 3-0--3
1/1
Technical Specifications
Electrical
Frequency Range
Gain
Polarization
Horizontal Beamwidth
Vertical Beamwidth
VSWR
Isolation
3rd Order Intermodulation @ 2x33 dBm
Power Handling
Impedance
MHz
dBi
deg
deg
806-960
2
Vertical
100-120
dB
dBc
W
1710-1880
1850-2700
4
Vertical&Horizontal
360
40-65
2.0:1
22
<-140
50
50
Mechanical
Dimensions, Dia x H
Weight
Radome Material
Mount
Reflector Material
Connector Type
Environmental Class
Shipping Dimensions, HxWxD
Shipping Weight
178x112 (7.0x4.4)
0.42 (1.1)
ABS
Ceiling, via hole (standard)
Aluminum
2 x N-Female
Indoor
175x175x175 (6.9x6.9x6.9)
0.5 (1.1)
mm (in)
kg(lb)
mm (in)
kg (lb)
Antenna Pattern
Vertical
pattern
Horizontal
pattern
960MHz
1710MHz
69
2500MHz
Issued: Nov12
Control: 0-0-5
1/1
A 5-core cable use for connection between AISG antenna line devices
Compliance with AISG1.1 and AISG2.0
8-pin Circular connector type
Weather resistance
Supply in various length
Technical Specifications
Electrical
Operating Voltage
250
5 (Conform to IEC60512-3)
Pulsating Voltage
Insulation Resistance
Contact Resistance
Mechanical
Cable Specification
2C x 0.32 + 3C x 0.75
2 x 8 pin circular connector, 1 Male + 1 Female
(Conform to IEC60130-9)
Connector Type
Operating Temperature
Operating Humidity
-40 to +85
95
Environmental Class
IP67
Note: Measurements taken at room temperature, unless otherwise stated.
Part Numbers
00-KX02(0.5)
m (in)
00-KX02(01)
m (in)
0.5 (19.7)
1 (39.4)
00-KX02(03)
m (in)
3 (118.1)
00-KX02(05)
m (in)
5 (196.9)
00-KX02(10)
m (in)
10 (393.7)
00-KX02(20)
m (in)
20 (787.4)
00-KX02(30)
m (in)
30 (1,181.1)
00-KX02(40)
m (in)
40 (1,574.8)
00-KX02(50)
m (in)
50 (1,968.5)
00-KX02(60)
m (in)
60 (2,362.2)
00-KX02(70)
m (in)
70 (2,755.9)
00-KX02(80)
m (in)
80 (3,149.6)
+12VDC nominal
Not connected
RS485 B
Not connected
RS485 A
10V-30V DC
DC Return
Not connected
Male
70
Issued: Jun12
Control: 3-1-1
1/1
RCU-003
Remote Control Unit
Features
Technical Specifications
Electrical
Connectors to CCU
Connectors to RCU
Power Supply
Power Consumption
+10~+30 DC
Protocol to CCU/TMA
Adjustment Time
Adjustment Cycles
30
sec
> 50,000
Mechanical
Dimensions, HxWxD
Weight
170x52x47 (6.7x2.0x1.8)
mm (in)
0.46 (1.0)
kg (lb)
-40 to +60
Environment Class
IP24
Side Views
71
Issued: 10Apr10
Control: 3-0-1
1/1
RCU-V5002
Remote Control Unit
Features
Technical Specifications
Electrical
Connectors to CCU
Connectors to RCU
Power Supply
+10~+30 DC
Power Consumption
Protocol to CCU/TMA
Adjustment Time
Adjustment Cycles
sec
30
> 50,000
Mechanical
Dimensions, HxWxD
Weight
mm (in)
170x52x47 (6.7x2.0x1.8)
kg (lb)
0.46 (1.0)
-40 to +60
Environment Class
IP65
*Note: RCU requires power supply >+24VDC to work optimally under low temperature condition of <-10C.
Side Views
72
Issued: Feb11
Control: 3-0-2
1/1
CCU-001AG, CCU-003AG
RET Central Control Unit. Hardware version 2.0
Features
Technical Specifications
Electrical
AISG Connectors
CCU-001AG
CCU-003AG
50W
Software Selectable
Alarm Interface
LED Indicators
Interface to RCU/TMA
Protocol to RCU/TMA
Communication Ports
Protocols to BTS
Protection
Mechanical
Mounting
Dimensions, HxWxD
Weight
44x220x185
kg
1.5
RS232 Connector
0 to +55
< 95
mm
83x280x253
kg
1.9
73
Issued: Nov 11
Control: 3-1-0
1/2
CCU-001AG, CCU-003AG
RET Central Control Unit. Hardware version 2.0
System Structure
Antennas
R
C
U
R
C
U
COMETS
Ethernet
R
C
U
AISG Cables
Power
Ethernet
RS232
Basestation
IP Network
Mounting Guide
Rack/Add Ear
Wall/Side
74
Wall/Front
Issued: Nov 11
Control: 3-1-0
2/2
Balanced LNA design and power failure bypass for high reliability
Alarm management: DC current load simulation
Light weight and compact design
Salt spray resistance, IP66
Built-in lightning protection and vented enclosure design
EMP protection with excellent MTBF
Product Description
The TA-C12FS03 is a single 850MHz tower mounted amplifier designed for use with a vertical or cross-pole antenna. The
unit is installed near the antenna at the tower top to improve receiver sensitivity of the base station. The usage of
TA-C12FS03 will result in an increase of successful call attempts, reduction of call drops, maximized data transmission
rate, improved call quality and extended handset talk time. Quality improvements will lead to increased traffic volume and
user satisfaction, hence increasing network revenue. It is recommended for use in new network roll-outs to minimize base
station count, or for upgrading of existing base stations to improve signal quality and drop call performance.
The TA-C12FS03 comprises high quality band-pass filters, low noise amplifiers (LNA), bias tee, and lightning protection
and by-pass circuitries. The LNA bypass circuitry is activated when the DC supply is switched off or when there is a fault
in the system.
Power is supplied via external bias tees that connect between the TA-C12FS03 and the PDM. Each PDM is constructed into
a 19 1U form factor, and can provide power for up to six units of TA-C12FS03.
Rx1 Fil
LNA
LNA
LNA Alarm
Generation Unit
RxBypass
Tx Fil
Rx2 Fil
Bias Tee
BTS Port
Bias Tee
+12V
BTS
PDM
Alarm
To BTS
75
Issued: Nov.11
Control: 3-2-0
1/2
MHz
Bandwidth
MHz
25
dB
12 1
Noise Figure
dB
dB
1.0
dB
1.8
System Gain
dBm
Normal Operation
By-pass Mode
Minor Alarm
Major Alarm
dB
mA
824-849
22
18
14
23020mA(Operation)
33020mA(By-pass Mode)
ns
200
Frequency Range
MHz
869-894
Bandwidth
MHz
25
dB
0.6
Group Delay
Electrical Downlink
Insertion Loss
dB
18
dBm
dBm
Group Delay
ns
70
Return Loss
7/16 DIN-Female
Operating Voltage
+10 to +15
Operating Current
mA
120@+12V
1.5
Power Consume
kg (lb)
Mounting
Light Grey
Enclosure Material
Aluminum
Operating Temperature
Operating Humidity
EMC
MTBF
4(8.8)
Mast mounting: with clamp set
Enclosure Color
Lightning Protection
Environmental Class
223x194x60(8.8x7.7x2.4)
-40 to +65
95
ETS 300 342-3
RF
8kA, 8/20s
IP66
hr
> 1,000,000
76
Issued: Nov.11
Control: 3-2-0
2/2
Product Description
The TA-C12FDA-A is a 850MHz twin tower mounted amplifier for both main and diversity branch and fits with cross-pole
antennas. The unit is installed near the antenna at the tower top to improve receiver sensitivity of the base station. The
usage of TA-C12FDA-A will result in an increase of successful call attempts, reduction of call drops, maximized data
transmission rate, improved call quality and extended handset talk time. Quality improvements will lead to increased
traffic volume and user satisfaction, hence increasing network revenue. It is recommended for use in new network
roll-outs to minimize base station count, or for upgrading of existing base stations to improve signal quality and drop call
performance.
The system comprises high quality band-pass filters, low noise amplifiers (LNA), bias tee, and lightning protection and
by-pass circuitries. The LNA bypass circuitry is activated when the DC supply is switched off or when there is a fault in the
system.
ANT0
ANT1
DC GND
DC GND
Rx1
Filter
RET
7/8 RF Cable
Rx1
Filter
TAC12FDA-A
RxBypass
RxBypass
LNA
The top of
the tower
RCU
RCU
Multi-cable
7/8 RF Cable
LNA
LNA
LNA
Tx
Filter
Tx
Filter
Supervision
and
Alarm
and
Alarm
Generation
Rx2
Filter
BTS 0
AISG
DC
Lightning
Protection
RS485B
Unit
Unit
DC
RS485A
Bias Tee
and Lightning
Protection
7/8 RF Cable
Rx2
Filter
Bias Tee
and Lightning
Protection
AISG
DC
BTM4S2
From CCU
or BTS
The root of
the tower
BTS
Modem
To RCU
BTS 1
77
Issued: Nov.11
Control: 3-0-0
1/2
MHz
Bandwidth
MHz
25
dB
12 1
Noise Figure
dB
dB
1.0
dB
1.8
System Gain
824-849
22
dBm
Normal Operation
By-pass Mode
Group Delay
18
dB
14
200
ns
Electrical Downlink
Frequency Range
MHz
Bandwidth
MHz
25
dB
0.6
Insertion Loss
869-894
dB
18
dBm
52 (CW); 58.6(Peak)
dBm
Group Delay
ns
70
Return Loss
Connectors Type
7/16 DIN-Female
8-pin Female IEC60130-9
(Pin3:RS485B, Pin5:RS485A,Pin6:+24V, Pin7:DC
return; other pins: not connected)
AISG
Operating Voltage
10 to +30
Operating Current
mA
150 20@+24V
Power Consume
Operation Mode
223x194x119 (8.8x7.7x4.7)
8 (17.6)
Mounting
Enclosure Color
Light Grey
Enclosure Material
Aluminum
Operating Temperature
-40 to +65
Operating Humidity
95
EMC
Lightning Protection
8kA, 8/20s
RS485A. RS485 B Different mould 3kA. Common
mould 5kA, DC and GND Different mould 3kA
IP66
AISG
Environmental Class
MTBF
hr
78
Issued: Nov.11
Control: 3-0-0
2/2
Balanced LNA design and power failure bypass for high reliability
Alarm management: DC current load simulation
Light weight and compact design
Salt spray resistance, IP66
Built-in lightning protection and vented enclosure design
EMP protection with excellent MTBF
Product Description
The TA-G12FS02 is a GSM900 tower mounted amplifier designed for use with a vertical or cross-pole antenna. The unit is
installed near the antenna at the tower top to improve receiver sensitivity of the base station. The usage of TA-G12FS02
will result in an increase of successful call attempts, reduction of call drops, maximized data transmission rate, improved
call quality and extended handset talk time. Quality improvements will lead to increased traffic volume and user
satisfaction, hence increasing network revenue. It is recommended for use in new network roll-outs to minimize base
station count, or for upgrading of existing base stations to improve signal quality and drop call performance.
The TA-G12FS02 comprises high quality band-pass filters, low noise amplifiers (LNA), bias tee, lightning protection and
by-pass circuitries. The LNA bypass circuitry is activated when the DC supply is switched off or when there is a fault in the
system.
Power is supplied via external bias tees that connect between the TA-G12FS02 and the PDM. Each PDM is constructed into
a 19 1U form factor, and can provide power for up to six units of TA-G12FS02.
Rx1 Fil
LNA
LNA
LNA Alarm
Generation Unit
RxBypass
Tx Fil
Rx2 Fil
Bias Tee
BTS Port
Bias Tee
+12V
PDM
BTS
79
Alarm
To BTS
th
Issued: 17 Nov
Control: 3-2-0
1/2
MHz
Bandwidth
MHz
25
dB
12 1
Noise Figure
dB
dB
1.0
dB
1.8
dBm
22
System Gain
890-915
Normal Operation
dB
18
By-pass Mode
dB
14
Minor Alarm
mA
Major Alarm
mA
Frequency Range
MHz
935-960
Bandwidth
MHz
25
dB
0.5
Return Loss
Alarm Management
Electrical - Downlink
Insertion Loss
dB
18
dBm
dBm
Return Loss
+10 to +15
Operating Current
mA
120 @+12V
1.5
mm(in)
246x182x58 (9.7x7.2x2.3)
Power Consume
Dimensions, LxWxH (excluding connectors & mounting
brackets)
Weight
kg(lb)
3.5 (7.7)
Wall mounting: with 4 screws
Mounting
Connector Type
7/16 DIN-Female
Enclosure Color
Light Grey
Enclosure Material
Aluminum
Operating Temperature
Operating Humidity
EMC
95
ETS 300 342-3
Comply with IEC 61000-4-5; 8kA, 8/20s
Lightning Protection
Environmental Class
MTBF
-40 to +65
IP66
hr
> 1000,000
80
th
Issued: 17 Nov
Control: 3-2-0
2/2
Balanced LNA design and power failure bypass for high reliability
Alarm management: DC current load simulation
Light weight and compact design
Salt spray resistance, IP66
Built-in lightning protection and vented enclosure design
EMP protection with excellent MTBF
Product Description
The TA-E12FS is an EGSM900 tower mounted amplifier designed for use with a vertical or cross-pole antenna. The unit is
installed near the antenna at the tower top to improve receiver sensitivity of the base station. The usage of TA-E12FS will
result in an increase of successful call attempts, reduction of call drops, maximized data transmission rate, improved call
quality and extended handset talk time. Quality improvements will lead to increased traffic volume and user satisfaction,
hence increasing network revenue. It is recommended for use in new network roll-outs to minimize base station count, or
for upgrading of existing base stations to improve signal quality and drop call performance.
The TA-E12FS comprises high quality band-pass filters, low noise amplifiers (LNA), bias tee, lightning protection and
by-pass circuitries. The LNA bypass circuitry is activated when the DC supply is switched off or when there is a fault in the
system.
Power is supplied via external bias tees that connect between the TA-E12FS and the PDM. Each PDM is constructed into a
19 1U form factor, and can provide power for up to six units of TA-E12FS.
Rx1 Fil
LNA
LNA
LNA Alarm
Generation Unit
RxBypass
Tx Fil
Rx2 Fil
Bias Tee
BTS Port
Bias Tee
+12V
BTS
PDM
81
Alarm
To BTS
th
Issued: 17 Nov 11
Control: 3-2-0
1/2
MHz
Bandwidth
MHz
35
dB
12 1
Noise Figure
dB
dB
1.0
dB
1.9
System Gain
Active Mode
880-915
dBm
22
dB
18
Bypass Mode
dB
14
Minor Alarm
mA
230 (Operation)
Major Alarm
mA
Frequency Range
MHz
925-960
Bandwidth
MHz
35
dB
0.6
Alarm Management
Electrical - Downlink
Insertion Loss
dB
18
dBm
dBm
Return Loss
+10 to +15
Operating Current
mA
120 10 @+12V
mm(in)
252x180x61 (9.9x7.1x2.4)
Power Consume
Dimensions, LxWxH (excluding connectors & mounting
brackets)
Weight
3.5 (7.7)
kg(lb)
Mounting
Connector Type
7/16 DIN-Female
Enclosure Color
Light Grey
Enclosure Material
Aluminum
Operating Temperature
-40 to +65
Operating Humidity
95
EMC
Lightning Protection
Environmental Class
MTBF
IP66
hr
> 1,000,000
82
th
Issued: 17 Nov 11
Control: 3-2-0
2/2
FFull Band
d Twin 90
00MHz AIS
SG2.0 Tower Mou
unted
A
Amplifier
r
T
TA-E12FD
DA-A
Features
s
Two TMA
A units in one enclosure
Power fa
ailure bypass for
f high reliab
bility
SG
Alarm management: DC
D current loa
ad simulation will
w be genera
ated when AIS
signal is not available
Light weight and comp
pact design
Salt spra
ay resistance, IP66
Built-in lightning prote
ection and ven
nted enclosure design
EMP prottection with excellent MTBF
F
AISG 2.0
0 Compatible
Product Descriptiion
cross-pole
e
w
The TA-E12FD
DA-A is an EGSM900 twin to
ower mounted
d amplifier for both main and
d diversity branch and fits with
e station. The
e
antennas. Th
he unit is insta
alled near the antenna at th
he tower top to
o improve rec
ceiver sensitivity of the base
aximized data
call drops, ma
usage of TA--E12FDA-A wiill result in an
n increase of successful ca
all attempts, reduction
r
of c
d to increased
ments will lead
transmission rate, improve
ed call quality
y and extende
ed handset ta
alk time. Quality improvem
k
ed for use in new network
traffic volume and user satisfaction, hence increasing network revenue. It is recommende
y and drop call
roll-outs to minimize
m
base station count,, or for upgrad
ding of existing base station
ns to improve signal quality
performance.
n and by-pass
s
ning protection
The system comprises high
h quality band-pass filters, lo
ow noise amplifiers (LNA), bias
b
tee, lightn
circuitries. Th
he LNA bypass
s circuitry is ac
ctivated when the DC supply
y is switched off
o or when there is a fault in the system.
Typical Applicatio
A
on Block Diagram
D
A
ANT0
ANT1
DC GND
G
DC GND
ET
RE
Rx1
Filterr
Rx1
Filter
7/8 RF Cable
RxBypass
TAE12FDA-A
RxBypass
RCU
RCU
Multi-cable
LNA
L
LNA
7/8 RF Cable
LNA
LNA
Tx
Filter
Tx
Filter
Supervision
and
and
Alarm
Alarm
Generation
Rx2
Filter
F
BT
TS 0
RS485B
AISG
DC
Lightning
Protection
DC
RS485A
Bias Tee
and Lightning
Protection
Rx2
Filter
Unit
Unit
7/8 RF Cable
B
Bias
Tee
and Lightning
Prrotection
AISG
A
D
DC
BTM1S2
M
From CCU
or Node B
The root of
the tower
Node B
Mode
em
To RCU
BTS 1
Information con
ntained in this document
d
is sub
bject to confirma
ation at time of ordering.
o
http://www.com
mba-telecom.com
83
th
ed: 17 Nov 11
Issue
Control: 3-1--0
1/2
FFull Band
d Twin 90
00MHz AIS
SG2.0 Tower Mou
unted
A
Amplifier
r
T
TA-E12FD
DA-A
Technica
al Specific
cations
Electrical - Uplink
k
Frequency Ra
ange
MHz
Bandwidth
MHz
3
35
System Gain
dB
12
21
Noise Figure
dB
dB
1.0
dB
1.9
880
0-915
22
dBm
Normall Operation
By-pass Mode
18
dB
14
Alarm Management
Compatible w
with AISG 2.0
0
Electrical Down
nlink
Frequency Ra
ange
MHz
Bandwidth
MHz
3
35
dB
0.6
Insertion Loss
925
5-960
dB
18
Absolute Max
ximum RF Input Power
dBm
Inter-modula
ation Products in Rx Band
dBm
Return Loss
Power, Mechanica
M
al & Envirronmenta
al
Modem Chara
acteristics
According to
t AISG Stand
dard 2.0 (Data
a rate:9.6kB)
RF
Connectors Type
T
7/16 DIN-Female
8-pin Female IEC60130-9
9
(Pin6:+24V
V, Pin3:RS485
5B, Pin5:RS48
85A, Pin7:DC
return; other pin
ns: not connec
cted)
AISG
Operating Voltage
Operating Cu
urrent with Sin
ngle Port
Power Consume
+10 to +30
mA
150 2
20@+24V
4
Operation Mo
ode
DC/OOK
K Node B0
252x179x11
19 (9.9x7x4.7))
kg (lb)
6.5 ((14.3)
W
Wall
mounting
g: with 4 screw
ws
Mounting
M
Mast
mounting
g: with clamp set
Enclosure Collor
Lightt Grey
Enclosure Material
Alum
minum
Operating Tem
mperature
Operating Humidity
EMC
ETS 30
00 342-3
RF
Lightning Protection
8kA, 8/20s
RS485A. RS485
R
B Differrent mould 3k
kA. Common
mould 5k
kA, DC and GND Different mould
m
3kA
AISG
Environmenta
al Class
MTBF
IP
P66
hr
Information con
ntained in this document
d
is sub
bject to confirma
ation at time of ordering.
o
http://www.com
mba-telecom.com
84
th
Issue
ed: 17 Nov 11
Control: 3-1--0
2/2
Balanced LNA design and power failure bypass for high reliability
Alarm management: DC current load simulation
Light weight and compact design
Salt spray resistance, IP66
Built-in lightning protection and vented enclosure design
EMP protection with excellent MTBF
Product Description
The TA-D12FS is a DCS1800 tower mounted amplifier designed for use with a vertical or cross-pole antenna. The unit is
installed near the antenna at the tower top to improve receiver sensitivity of the base station. The usage of TA-D12FS will
result in an increase of successful call attempts, reduction of call drops, maximized data transmission rate, improved call
quality and extended handset talk time. Quality improvements will lead to increased traffic volume and user satisfaction,
hence increasing network revenue. It is recommended for use in new network roll-outs to minimize base station count, or
for upgrading of existing base stations to improve signal quality and drop call performance.
The TA-D12FS comprises high quality band-pass filters, low noise amplifiers (LNA), bias tee, and lightning protection and
bypass circuitries. The LNA bypass circuitry is activated when the DC supply is switched off or when there is a fault in the
system.
Power is supplied via external bias tees that connect between the TA-D12FS and the PDM. Each PDM is constructed into
a 19 1U form factor, and can provide power for up to six units of TA-D12FS.
Rx1 Fil
LNA
LNA
LNA Alarm
Generation Unit
RxBypass
Tx Fil
Rx2 Fil
Bias Tee
BTS Port
Bias Tee
+12V
PDM
BTS
85
Alarm
To BTS
th
Issued: 17 Nov11
Control: 3-2-0
1/2
MHz
Bandwidth
MHz
75
dB
12 1
Noise Figure
dB
dB
1.2
dB
2.2
dBm
25
System Gain
Return Loss
Normal Operation
Bypass Mode
1710-1785
18
dB
14
mA
70 or 155
Frequency Range
MHz
1805-1880
Bandwidth
MHz
75
dB
0.6
Alarm Management
Alarm window
Electrical - Downlink
Insertion Loss
dB
18
dBm
dBm
Return Loss
+10 to +15
Operating Current
mA
110 10 @12V
1.5
mm(in)
250x121x60 (9.8x4.8x2.4)
Power Consume
Dimensions, LxWxH (excluding connectors & mounting
brackets)
Weight
3 (6.6)
kg(lb)
Mounting
Connector Type
7/16 DIN-Female
Enclosure Color
Light Grey
Enclosure Material
Aluminum
Operating Temperature
Operating Humidity
-40 to +65
95
EMC
Lightning protection
Environmental Class
MTBF
IP66
hr
> 1,000,000
86
th
Issued: 17 Nov11
Control: 3-2-0
2/2
Product Description
The TA-D12FD-03 is a full band DCS1800 twin tower mounted amplifier for both main and diversity branch and fits with
cross-pole antennas. The unit is installed near the antenna at the tower top to improve receiver sensitivity of the base
station. The usage of TA-D12FD-03 will result in an increase of successful call attempts, reduction of call drops, maximized
data transmission rate, improved call quality and extended handset talk time. Quality improvements will lead to increased
traffic volume and user satisfaction, hence increasing network revenue. It is recommended for use in new network
roll-outs to minimize base station count, or for upgrading of existing base stations to improve signal quality and drop call
performance.
The system comprises high quality band-pass filters, low noise amplifiers (LNA), bias tee, lightning protection and by-pass
circuitries. The LNA bypass circuitry is activated when the DC supply is switched off or when there is a fault in the system.
Power is supplied via external bias tees that connect between the TA-D12FD-03 and the PDM. Each PDM is constructed
into a 19 1U form factor, and can provide power for up to three units of TA-D12FD-03.
To Antenna
ANT0 Port
Rx1 Fil
LNA
Tx Fil
Rx2 Fil
Rx1 Fil
LNA
LNA
LNA0 Alarm
Generation Unit
LNA1 Alarm
Generation Unit
RxBypass
ANT1 Port
Tx Fil
Rx2 Fil
Bias Tee
Bias Tee
BTS0 Port
Bias Tee
RxBypass
LNA
BTS1 Port
Bias Tee
+12V
BTS
87
PDM
Alarm
To BTS
th
Issued: 17 Nov11
Control: 3-1-0
1/2
MHz
Bandwidth
MHz
75
dB
12 1
Noise Figure
dB
dB
1.0
dB
2.2
System Gain
dBm
Normal Operation
By-pass Mode
dB
1710-1785
25
18
14
mA
230 (Operation)
330 (By-pass Mode)
Frequency Range
MHz
1805-1880
Bandwidth
MHz
75
dB
0.6
Alarm Management
Minor Alarm
Major Alarm
Electrical - Downlink
Insertion Loss
Return Loss
Absolute Maximum RF Input Power
Inter-modulation Products in RX Band
dB
18
dBm
dBm
+10 to +15
mA
120 @+12V
1.5
mm(in)
250x224x60.5 (9.9x8.9x2.4)
kg(lb)
6 (13.2)
Wall mounting: with 4 screws
Mounting
Connector Type
7/16 DIN-Female
Enclosure Color
Light Grey
Enclosure Material
Aluminum
Operating Temperature
Operating Humidity
EMC
95
ETS 300 342-3
Lightning Protection
Environmental Class
MTBF (per Unit)
-40 to +65
IP66
hr
88
th
Issued: 17 Nov11
Control: 3-1-0
2/2
Product Description
The TA-D12FDA-A is a full band GSM1800 twin tower mounted amplifier for both main and diversity branch and fits with
cross-pole antennas. The unit is installed near the antenna at the tower top to improve receiver sensitivity of the base
station. The usage of TA-D12FDA-A will result in an increase of successful call attempts, reduction of call drops,
maximized data transmission rate, improved call quality and extended handset talk time. Quality improvements will lead
to increased traffic volume and user satisfaction, hence increasing network revenue. It is recommended for use in new
network roll-outs to minimize base station count, or for upgrading of existing base stations to improve signal quality and
drop call performance.
The system comprises high quality band-pass filters, low noise amplifiers (LNA), bias tee, and lightning protection and
bypass circuitries. The LNA bypass circuitry is activated when the DC supply is switched off or when there is a fault in the
system.
Power is supplied via external smart bias tee that connects between TA-D12FDA-A and BTS. AISG signals pass through
smart bias tee and are transmitted to other antenna line devices via TA-D12FDA-A.
ANT0
ANT1
The top of
the tower
DC GND
DC GND
RET
Rx1
Filter
Rx1
Filter
7/8 RF Cable
RCU
RxBypass
RxBypass
TA-D12FDA-A
RCU
Multi-cable
LNA
7/8 RF Cable
LNA
LNA
LNA
Tx
Filter
Tx
Filter
Supervision
and
Alarm
and
Alarm
Generation
Rx2
Filter
BTS 0
AISG
DC
Lightning
Protection
RS485B
Unit
Unit
DC
RS485A
Bias Tee
and Lightning
Protection
Rx2
Filter
7/8 RF Cable
From CCU
or BTS
The root of
the tower
Bias Tee
and Lightning
Protection
AISG
DC
BT-M4S2
BTS
Modem
To RCU
BTS 1
89
th
Issued: 17 Nov 11
Control: 3-0-0
1/2
MHz
Bandwidth
MHz
75
System Gain
dB
12 1
Noise Figure
dB
dB
1.0
dB
2.2
1710-1785
25
dBm
Normal Operation
Bypass Mode
18
dB
14
Electrical - Downlink
Frequency Range
MHz
Bandwidth
MHz
75
dB
0.6(typ.0.5)
Insertion Loss
1805-1880
dB
18
dBm
dBm
ns
50
Return Loss
Group Delay
Connectors Type
7/16 DIN-Female
8-pin Female IEC60130-9
(Pin6:+24V, Pin3:RS485B, Pin5:RS485A, Pin7:DC
return; other pins: not connected)
+10 to +30
mA
160 20 @+24V
3.5
Through BTS0 Port or BTS1 Port
mm(in)
250x224x59.5 (9.8x8.8x2.4)
kg(lb)
6 (13)
Wall mounting: with 4 screws
Mast mounting: with clamp set
Light Grey
AISG
Operating Voltage
Operating Current with Single Port Power Supply
Power Consume
DC Supply
Dimensions, LxWxH (excluding connectors & mounting
brackets)
Weight
Mounting
Enclosure Color
Enclosure Material
Aluminum
Operating Temperature
Operating Humidity
-40 to +65
95
EMC
Lightning Protection
AISG Port
Environmental Class
MTBF
IP66
h
90
th
Issued: 17 Nov 11
Control: 3-0-0
2/2
Product Description
The TA-D12FDA is a full band GSM1800 twin tower mounted amplifier for both main and diversity branch and fits with
cross-pole antennas. The unit is installed near the antenna at the tower top to improve receiver sensitivity of the base
station. The usage of TA-D12FDA will result in an increase of successful call attempts, reduction of call drops, maximized
data transmission rate, improved call quality and extended handset talk time. Quality improvements will lead to increased
traffic volume and user satisfaction, hence increasing network revenue. It is recommended for use in new network
roll-outs to minimize base station count, or for upgrading of existing base stations to improve signal quality and drop call
performance.
The system comprises high quality band-pass filters, low noise amplifiers (LNA), bias tee, and lightning protection and
bypass circuitries. The LNA bypass circuitry is activated when the DC supply is switched off or when there is a fault in the
system.
Power is supplied via external smart bias tee that connects between TA-D12FDA and Node B. AISG signals pass through
smart bias tee and are transmitted to other antenna line devices via TA-D12FDA.
ANT0
ANT1
The top of
the tower
DC GND
DC GND
RET
Rx1
Filter
7/8 RF Cable
Rx1
Filter
RxBypass
RxBypass
TA-D12FDA
RCU
RCU
Multi-cable
LNA
LNA
7/8 RF Cable
LNA
LNA
Tx
Filter
Tx
Filter
Supervision
and
Alarm
and
Alarm
Generation
Rx2
Filter
Lightning
Protection
BTS 0
7/8 RF Cable
RS485B
DC Power
DC
RS485A
Bias Tee
and Lightning
Protection
Rx2
Filter
Unit
Unit
From CCU
or Node B
The root of
the tower
Node B
Modem
To RCU
BT-M1S
BTS 1
91
th
Issued: 17 Nov 11
Control: 3-2-0
1/2
MHz
Bandwidth
MHz
75
dB
12 1
Noise Figure
dB
dB
1.2
dB
2.2
System Gain
1710-1785
25
dBm
Normal Operation
Bypass Mode
Minor Alarm
18
dB
14
> 230 20@+12V (Operation)
mA
Major Alarm
Electrical - Downlink
Frequency Range
MHz
Bandwidth
MHz
75
dB
0.6
Insertion Loss
1805-1880
dB
18
dBm
dBm
Return Loss
Connectors Type
7/16 DIN-Female
8-pin Female IEC60130-9
(Pin1:+12V ,Pin3:RS485B, Pin5:RS485A, Pin7:DC
return; other pins: not connected)
+10 to +15
mA
140 10 @+12V
mA
250 10 @+12V
3.5(dual units)
DC/OOK Node B0
DC Node B1
mm(in)
250x224x60 (9.8x8.8x2.4)
kg(lb)
5 (11)
Wall mounting: with 4 screws
Mast mounting: with clamp set
Light Grey
AISG
Operating Voltage
Operating Current with Dual Ports Power Supply
Operating Current with Single Port Power Supply
(AISG Mode)
Power Consume
Operation Mode
Dimensions, LxWxH (excluding connectors & mounting
brackets)
Weight
Mounting
Enclosure Color
Enclosure Material
Aluminum
Operating Temperature
-40 to +65
Operating Humidity
EMC
RF Ports
Lightning Protection
95
ETS 300 342-3
Comply with IEC 61000-4-5; 8kA, 8/20s
RS485ARS485 B Different mould 3kACommon
mould 5KA ,DC and GND Different mould 3kA
AISG Port
Environmental Class
MTBF
IP66
hr
92
th
Issued: 17 Nov 11
Control: 3-2-0
2/2
Product Description
The TA-P12FDA is a 1900 MHz twin tower mounted amplifier for both main and diversity branch and fits with cross-pole
antennas. The unit is installed near the antenna at the tower top to improve receiver sensitivity of the base station. The
usage of TA-P12FDA will result in an increase of successful call attempts, reduction of call drops, maximized data
transmission rate, improved call quality and extended handset talk time. Quality improvements will lead to increased
traffic volume and user satisfaction, hence increasing network revenue. It is recommended for use in new network
roll-outs to minimize base station count, or for upgrading of existing base stations to improve signal quality and drop call
performance.
The system comprises high quality band-pass filters, low noise amplifiers (LNA), bias tee, and lightning protection and
by-pass circuitries. The LNA bypass circuitry is activated when the DC supply is switched off or when there is a fault in the
system.
ANT0
ANT1
The top of
the tower
DC GND
DC GND
Rx1
Filter
RET
7/8 RF Cable
Rx1
Filter
RCU
RCU
TA-P12FDA
RxBypass
RxBypass
Multi-cable
7/8 RF Cable
LNA
LNA
LNA
LNA
Tx
Filter
Tx
Filter
Supervision
and
Alarm
and
Alarm
Generation
Rx2
Filter
BTS 0
RS485B
AISG
DC
Lightning
Protection
DC
RS485A
Bias Tee
and Lightning
Protection
Rx2
Filter
Unit
Unit
Bias Tee
and Lightning
Protection
AISG
DC
From CCU
or BTS
BT-M1S
7/8 RF Cable
The root of
the tower
BTS
Modem
To RCU
BTS 1
93
Issued: Nov 11
Control: 3-0-0
1/2
MHz
Bandwidth
MHz
60
dB
12 1
Noise Figure
dB
dB
1.0
dB
2.2
System Gain
1850-1910
25
dBm
Normal Operation
By-pass Mode
Minor Alarm
Major Alarm
18
dB
14
23020mA(Operation)
mA
33020mA(By-pass Mode)
ns
100
Frequency Range
MHz
1930-1990
Bandwidth
MHz
60
dB
0.6
Group Delay
Electrical Downlink
Insertion Loss
dB
18
dBm
dBm
Group Delay
ns
50
Return Loss
Operating Voltage
Operating Current at single port
Power Consume
+9 to +15
mA
14010@+12V
1.8
250x224x59.5(9.9x8.8x2.4)
kg (lb)
6(13.2)
Mounting
Enclosure Color
Light Grey
Enclosure Material
Aluminum
Operating Temperature
Operating Humidity
-40 to +65
95
EMC
Connectors Type
7/16 DIN-Female
8-pin AISG-Female
Pin1:+12V,Pin3:RS485B, Pin5:RS485A,
Pin6:+24V,Pin7:DC return, other pins: not connected
AISG
RF
Lightning Protection
8kA, 8/20s
RS485A. RS485 B Different mould 3kA. Common
mould 5kA, DC and GND Different mould 3kA
AISG
Environmental Class
MTBF
IP66
hr
> 1,000,000
94
Issued: Nov 11
Control: 3-0-0
2/2
Product Description
The TA-P12FDA-A is a PCS1900/CDMA1900 twin tower mounted amplifier for both main and diversity branch and fits with
cross-pole antennas. The unit is installed near the antenna at the tower top to improve receiver sensitivity of the base
station. The usage of TA-P12FDA-A will result in an increase of successful call attempts, reduction of call drops, maximized
data transmission rate, improved call quality and extended handset talk time. Quality improvements will lead to increased
traffic volume and user satisfaction, hence increasing network revenue. It is recommended for use in new network
roll-outs to minimize base station count, or for upgrading of existing base stations to improve signal quality and drop call
performance.
The system comprises high quality band-pass filters, low noise amplifiers (LNA), bias tee, and lightning protection and
by-pass circuitries. The LNA bypass circuitry is activated when the DC supply is switched off or when there is a fault in the
system.
ANT0
ANT1
DC GND
DC GND
Rx1
Filter
The top of
the tower
RET
Rx1
Filter
7/8 RF Cable
TAP12FDA-A
RxBypass
RxBypass
RCU
RCU
Multi-cable
LNA
LNA
7/8 RF Cable
LNA
LNA
Tx
Filter
Tx
Filter
Supervision
and
Alarm
and
Alarm
Generation
Rx2
Filter
BTS 0
RS485B
AISG
DC
Lightning
Protection
DC
RS485A
Bias Tee
and Lightning
Protection
Rx2
Filter
Unit
Unit
7/8 RF Cable
Bias Tee
and Lightning
Protection
AISG
DC
The root of
the tower
BTS
Modem
To RCU
From CCU
or Node B
BT-M1S2
BTS 1
95
Issued: Nov.11
Control: 3-0-1
1/2
MHz
Bandwidth
MHz
60
dB
12 1
Noise Figure
dB
dB
1.0
dB
2.2
System Gain
1850-1910
25
dBm
Normal Operation
By-pass Mode
Minor Alarm
18
dB
14
12020mA@+24V(Operation)
mA
Major Alarm
Group Delay
20020mA@+24V(By-pass Mode)
100
ns
Electrical - Downlink
Frequency Range
MHz
Bandwidth
MHz
60
dB
0.6
Insertion Loss
1930-1990
dB
18
dBm
52 (CW);58.6(Peak)
dBm
ns
50
Return Loss
Group Delay
Operating Voltage
Operating Current with single port
Power Consume with single port
Operation Mode (Only Node B0 pass DC/OOK)
Dimensions, LxWxH (excluding connectors & mounting
brackets)
Weight
+9 to +30
mA
70 10@+24V
1.8
mm(in)
250x224x59.5 (9.8x8.8x2.3)
6 (13.2)
kg(lb)
Mounting
Connector Type
7/16 DIN-Female
8-pin Female IEC60130-9
(Pin6:+24V, Pin3:RS485B, Pin5:RS485A, Pin7:DC
return; other pins: not connected)
AISG
Enclosure Color
Light Grey
Enclosure Material
Aluminum
Operating Temperature
Operating Humidity
-40 to +65
95
EMC
Lightning Protection
8kA, 8/20s
RS485A. RS485 B Different mould 3kA. Common
mould 5kA, DC and GND Different mould 3kA
AISG
Environmental Class
MTBF
IP66
hr
> 1,000,000
96
Issued: Nov.11
Control: 3-0-1
2/2
Product Description
The TA-W12FDA-A is a WCDMA2100MHz twin tower mounted amplifier for both main and diversity branch and fits with
cross-pole antennas. The unit is installed near the antenna at the tower top to improve receiver sensitivity of the base
station. The usage of TA-W12FDA-A will result in an increase of successful call attempts, reduction of call drops,
maximized data transmission rate, improved call quality and extended handset talk time. Quality improvements will lead
to increased traffic volume and user satisfaction, hence increasing network revenue. It is recommended for use in new
network roll-outs to minimize base station count, or for upgrading of existing base stations to improve signal quality and
drop call performance.
The system comprises high quality band-pass filters, low noise amplifiers (LNA), bias tee, and lightning protection and
by-pass circuitries. The LNA bypass circuitry is activated when the DC supply is switched off or when there is a fault in the
system.
ANT0
ANT1
DC GND
DC GND
Rx1
Filter
Rx1
Filter
RxBypass
RxBypass
LNA
LNA
LNA
LNA
Tx
Filter
Tx
Filter
Supervision
and
Alarm
and
Alarm
Generation
Rx2
Filter
BTS 0
RS485B
AISG
DC
Lightning
Protection
DC
RS485A
Bias Tee
and Lightning
Protection
Rx2
Filter
Unit
Unit
Bias Tee
and Lightning
Protection
AISG
DC
Modem
To RCU
BTS 1
97
Issued: Nov 11
Control: 3-0-1
1/2
MHz
Bandwidth
MHz
60
dB
12 1
Noise Figure
dB
dB
1.0
dB
2.4
System Gain
1920-1980
25
dBm
Normal Operation
By-pass Mode
Group Delay
18
dB
14
80
ns
Electrical Downlink
Frequency Range
MHz
Bandwidth
MHz
60
dB
0.5
Insertion Loss
2110-2170
dB
18
dBm
52 (CW); 58.6(Peak)
dBm
Group Delay
ns
25
Return Loss
Connectors Type
7/16 DIN-Female
AISG
Operating Voltage
+9 to +30
Operating Current
mA
150 20@+24V
Power Consume
DC/OOK Node B0
200x194x54.3(7.9x7.7x2.1)
4.0(8.8)
Mounting
Enclosure Color
Light Grey
Enclosure Material
Aluminum
Operating Temperature
-40 to +65
Operating Humidity
95
EMC
Lightning Protection
8kA, 8/20s
RS485A. RS485 B Different mould 3kA. Common
mould 5kA, DC and GND Different mould 3kA
IP66
AISG
Environmental Class
MTBF
hr
> 1,000,000
98
Issued: Nov 11
Control: 3-0-1
2/2
Product Description
The TA-W12FDA-02 is a UMTS2100MHz twin tower mounted amplifier for both main and diversity branch and fits with
cross-pole antennas. The unit is installed near the antenna at the tower top to improve receiver sensitivity of the base
station. The usage of TA-W12FDA-02 will result in an increase of successful call attempts, reduction of call drops,
maximized data transmission rate, improved call quality and extended handset talk time. Quality improvements will lead
to increased traffic volume and user satisfaction, hence increasing network revenue. It is recommended for use in new
network roll-outs to minimize base station count, or for upgrading of existing base stations to improve signal quality and
drop call performance.
The system comprises high quality band-pass filters, low noise amplifiers (LNA), bias tee, lightning protection and by-pass
circuitries. The LNA bypass circuitry is activated when the DC supply is switched off or when there is a fault in the system.
ANT0
ANT1
The top of
the tower
DC GND
DC GND
Rx1 Fil
RET
7/8 RF Cable
Rx1 Fil
RxBypass
RCU
TA-W 12FDA02
RxBypass
RCU
Multi -cable
LNA
LNA
LNA
Supervision
and Alarm
Generation
Unit
Rx2 Fil
Node B
DC Power
LNA
Tx Fil
From CCU
or Node B
BT-R 1S 2
Rx2 Fil
7 /8 RF Cable
The root of
the tower
RS485A
RS485B
Tx Fil
Bias Tee
and Lightning
Protection
LNA
7 /8 RF Cable
Lightning
Protection
Node
Modem
To RCU
Node B1
99
Issued:Sep.2012
Control: 0-0-1
1/2
MHz
Bandwidth
MHz
60
System Gain
dB
12
Noise Figure
dB
Gain Ripple
dB
0.5
dB
2.3
1920-1980
25
dBm
Normal Operation
By-pass Mode
18
dB
16
Tx-Rejection
dB
75
Group Delay
ns
150
Impedance
50
Frequency Range
MHz
2110-2170
Bandwidth
MHz
60
Insertion Loss
dB
0.5
Return Loss
dB
18
Rx-rejection
dB
> 45
200 (+53dBm)
Electrical Downlink
500 (+57dBm)
dBm
-120
50
AISG Compatible
mm(in)
Weight
kg(lb)
Mounting Kit
RF
20019455 (7.88x7.64x2.2)
3.0(6.6)
Pole mounting
7/16 DIN-Female
7/16 DIN-Female
8-pin Female IEC60130-9
(Pin1:+12V ,Pin3:RS485B, Pin5:RS485A,
Pin6:+24v,Pin7:DC return; other pins: not
connected)
Light Grey, NCS 1502-R
ANT
Node B
Connectors Type
AISG
Enclosure Color
Enclosure Material
Aluminum
Operating Temperature
Operating Humidity
-40 to +65
100
ETS 300 342-3
Lightning Protection
Weather Protection
MTBF
hr
100
> 500,000
Issued:Sep.2012
Control: 0-0-1
2/2
Product Description
The TA-W12FD is a WCDMA2100MHz twin tower mounted amplifier for both main and diversity branch and fits with
cross-pole antennas. The unit is installed near the antenna at the tower top to improve receiver sensitivity of the base
station. The usage of TA-W12FD will result in an increase of successful call attempts, reduction of call drops, maximized
data transmission rate, improved call quality and extended handset talk time. Quality improvements will lead to increased
traffic volume and user satisfaction, hence increasing network revenue. It is recommended for use in new network
roll-outs to minimize base station count, or for upgrading of existing base stations to improve signal quality and drop call
performance.
The system comprises high quality band-pass filters, low noise amplifiers (LNA), bias tee, lightning protection and bypass
circuitries. The LNA bypass circuitry is activated when the DC supply is switched off or when there is a fault in the system.
Power is supplied via external bias tees that connect between the TA-W12FD and the PDM. Each PDM is constructed into
a 19 1U form factor, and can provide power for up to three units of TA-W12FD.
To Antenna
ANT1 Port
ANT0 Port
The top of
the tower
Rx1 Fil
LNA
Tx Fil
Rx2 Fil
LNA
LNA
LNA0 Alarm
Generation Unit
LNA1 Alarm
Generation Unit
RxBypass
ANT
Rx1 Fil
LNA
RxBypass
TA-W12FD
Tx Fil
7/8 RF Cable
7/8 RF Cable
Rx2 Fil
Bias Tee
Bias Tee
BTS0 Port
DC From
Node B
BTS1 Port
BT-M1
BT-M1
DC From
Node B
The root of
the tower
Bias Tee
Bias Tee
Node B
+12V
BTS
PDM
Alarm
To BTS
101
Issued: Nov11
Control: 3-1-1
1/2
MHz
Bandwidth
MHz
60
dB
12 1
Noise Figure
dB
dB
1.0
dB
2.3(typ. 1.7)
dBm
25
System Gain
Normal Operation
Bypass Mode
ns
ns
Alarm Management
Major Alarm
18
dB
Group Delay
Minor Alarm
1920-1980
14
80
20
230 (Operation)
mA
Electrical Downlink
Frequency Range
MHz
Bandwidth
MHz
60
dB
0.5
Insertion Loss
2110-2170
dB
18
dBm
Return Loss
dBm
Group Delay
ns
25
ns
9 to +15
mA
11010 @+12V
1.5
mm(in)
192x196x54 (7.5x7.7x2.1)
kg(lb)
4 (8.8)
Wall mounting: with 4 screws
Mounting
Connector Type
7/16 DIN-Female
Enclosure Color
Light Grey
Enclosure Material
Operating Temperature
Operating Humidity
EMC
Lightning Protection
Aluminum
C
%
-40 to +65
95
ETS 300 342-3
Comply with IEC 61000-4-5; 8kA, 8/20s
hr
> 1,000,000
Environmental Class
MTBF
IP66
Note: Measurements taken at room temperature, unless otherwise stated.
102
Issued: Nov11
Control: 3-1-1
2/2
Product Description
TA-Y12FDA-A is a LTE2.6G twin tower mounted amplifier for both main and diversity branch of a cell sector. The unit is
installed near the antenna at the tower top to improve receive sensitivity of base station. The usage of TA-Y12FDA-A will
result in increase of successful call attempts, reduction of call drops, maximized data transmission rate, improved call
quality and extended handset talk time. RF quality improvements will lead to increased traffic volume and user
satisfaction, hence increasing network revenue. It is recommended for use in new network roll-outs to minimize base
station count, or for upgrading of existing base stations to improve signal quality and drop call performance.
TA-Y12FDA-A is made of high quality band-pass filters, low noise amplifier (LNA), bias tee, and lightning protection and
bypass circuitries. The LNA bypass circuitry is activated when the DC supply is switched off or when there is a fault in the
system. An AISG port is located beneath the TMA for connection to other AISG compliant line devices.
ANT0
ANT1
The top of
the tower
DC GND
DC GND
Rx1
Filter
RET
7/8 RF Cable
Rx1
Filter
RxBypass
TAY12FDA-A
RxBypass
RCU
RCU
Multi-cable
LNA
LNA
7/8 RF Cable
LNA
LNA
Tx
Filter
Tx
Filter
Supervision
and
and
Alarm
Alarm
Generation
Rx2
Filter
NodeB 0
RS485B
AISG
DC
DC
RS485A
Bias Tee
and Lightning
Protection
Rx2
Filter
Unit
Unit
Lightning
Protection
AISG
DC
7/8 RF Cable
Bias Tee
and Lightning
Protection
From CCU
or Node B
The root of
the tower
Node B
Modem
To RCU
BTR1S2
NodeB 1
103
Issued: Nov 11
Control: 2-0-1
1/2
MHz
2500-2570
Bandwidth
MHz
70
12 1
System Gain
dB
Noise Figure
Room temperature
dB
-40 oC to +65 oC
dB
2.2
dB
dBm
Normal Operation
Return Loss
dB
Bypass Mode
14
Electrical - Downlink
Frequency Range
Bandwidth
MHz
MHz
Insertion Loss
2620-2690
70
0.5
dB
dB
18
dBm
dBm
mA
140 10@+24V
3.5
Return Loss
AISG
and
mm (in)
272x194x83.8(10.6x7.7x3.3)
kg (lb)
4 (8.8)
Wall mounting: with 4 screws
RF
Connectors Type
7/16 DIN-Female
8-pin Female IEC60130-9
(Pin6:+24V, Pin3:RS485B, Pin5:RS485A, Pin7:DC
return; other pins: not connected)
Light Grey
AISG
Enclosure Color
Enclosure Material
Operating Temperature Range
Operating Humidity
EMC
RF
Lightning Protection
AISG
Environmental Class
MTBF
Aluminum
-40 to +65
95
ETS 300 342-3
8kA, 8/20s
RS485A. RS485B different mould 3kA. Common
mould 5kA, DC and GND different mould 3kA
IP66
hr
> 1,000,000
Note: Measurements taken at room temperature, unless otherwise stated.
o
C
%
104
Issued: Nov 11
Control: 2-0-1
2/2
Product Description
The TA-C12G12FDA-A is a dual band tower mounted amplifier aims to provide tower top LNA functionalities for both
800MHz and 900MHz for antenna line systems equipped with one pair of feeders on both antenna and BTS ports. The unit
is installed near the antenna at the tower top to improve receiver sensitivity of the base station. The usage of
TA-C12G12FDA-A will result in an increase of successful call attempts, reduction of call drops, maximized data
transmission rate, improved call quality and extended handset talk time. Quality improvements will lead to increased
traffic volume and user satisfaction, hence increasing network revenue. It is recommended for use in new network
roll-outs to minimize base station count, or for upgrading of existing base stations to improve signal quality and drop call
performance.
The system comprises high quality band-pass filters, low noise amplifiers (LNA), bias tee, and lightning protection and
by-pass circuitries. The LNA bypass circuitry is activated when the DC supply is switched off or when there is a fault in the
system.
Block Diagram
ANT 1
ANT0
DC GND
DC GND
900 Tx
filter
800 Tx
filter
LNA
900 Rx
filter
800 Rx
filter
800 Rx
filter
900
LNA
Monitor
Unit
(CWA)
(AISG)
900 Rx
filter
800 Tx
filter
LNA
LNA
900 Tx
filter
LNA
800
LNA
Monitor
Unit
(AISG)
900 Rx
filter
800 Rx
filter
Modem
BTS 0
900 Rx
filter
800 Rx
filter
Lightning
Protection
Modem
To RCU
To RCU
BTS 1
105
Issued: Nov.12
Control: 1-0-0
1/3
MHz
890-915
MHz
842-862
dB
121.0
Noise Figure
dB
dB
dBm
dBm
14
Return Loss
Normal Operation
18
dB
By-pass Mode
14
dBm
MHz
935-960
MHz
801-821
dB
max. 0.7
Electrical Downlink
Frequency Range(900MHz band)
Frequency Range(800MHz band) for High frequency HW
variant
Insertion Loss
dB
18
dBm
48(CW); 57(Peak)
dBm
49(CW); 58(Peak)
Return Loss
Per AISG2.0
Modem Characteristics
Operating Voltage
Operating current consumption in CWA mode
V
W
+10 to +30
< 2(<80@ +24V)
mA
mA
V
W
mm
kg
Mounting
<12
Pole mounting: with clamp set
Wall mounting: with 4 screws
Light Grey
Enclosure Color
Enclosure Material
Aluminum
Operating Temperature
Operating Humidity
100
EMC
RF
Connectors Type
Lightning Protection
AISG
ANT port
-40 to +55
7/16 DIN-Female
BTS port
Environmental Class
MTBF
IP67
hr
> 1,000,000
106
DC Ground
10kA, 8/20s
Issued: Nov.12
Control: 1-0-0
2/3
X
X
X
X
X
X
AISG
for
RET
TMA management
Ant 0
Ant 1
TMA
800 / 900
LNA
900
800/900
Main path
Diplexer
800/900
Diplexer
800/900
AISG
800
BTS 0
AISG
CWA/AISG
LNA
800
800/900
div path
800/900
Main path
TRDU
800
800/900
div path
BTS1
AISG 900
CWA
ANC
LNA
900
LNA
800
AISG
(DC nom. = 24 VDC)
MC-TRX
900
107
Issued: Nov.12
Control: 1-0-0
3/3
Suitable for operating in high or low temperature, humidity and other bad
environment
Technical Specifications
Electrical
BT-R1
Frequency Range
Insertion Loss
VSWR
Inter-modulation Products
Power Handling
Current Capacitance
Operational Voltage
Impedance
MHz
dB
BT-R2
dBc
W
A
V
698-2700
0.2
1.2
-153 @2x43dBm
120
2.3
9-30
50
mm(in)
1195745(4.72.21.8)
Mechanical
Dimensions, LxWxH (including connectors)
Weight
Connectors
kg(lb)
BTS/Node B Port
ANT Port
0.5 (1.1)
7/16 Male
7/16 Female
Operational Humidity
Temperature Range
Environmental Class
Lightning Protection
EMC
7/16 Female
7/16 Male
<95
-40 to +60
IP66 (Indoor or Outdoor)
8kA, 8/20s
ETS 300 342-3
Outline Drawing
BT-R2 outline
drawing reference
108
Issued: Sep10
Control: 3-0-0
1/1
Provides DC voltage as well as remote control signals via RF feeder cable to TMA
or Antenna Line Devices (ALD)
Technical Specifications
Electrical
BT-R1S2
Frequency Range
Insertion Loss
VSWR
Modem Carrier Frequency
Inter-modulation Products
Power Handling
Current Capacity
Power Consume
Operational Voltage
MHz
dB
mm (in)
1197346(4.72.91.8)
kg (lb)
0.45 (0.99)
7/16 DIN Male
7/16 DIN Female
7/16 DIN Female
7/16 DIN Male
8-pin Male Connector
8-pin Female Connector
5 - 95
-40 to +65
IP66 (Indoor or Outdoor)
8kA, 8/20s
ETS 300 342-3
MHz
dBc
W
A
W
V
Model
Impedance
BT-R2S2
698-2700
0.2
1.2
2.176
-153 @2x43dBm
120
2.3
0.8
10-30
+24V (AISG port in,ANT
+24V (BTS/Node B port
port out)
in, AISG port out)
50
Mechanical
Dimensions, LxWxH (including connectors)
Weight
Connectors
Operational Humidity
Temperature Range
Environmental Class
Lightning Protection
EMC
BTS/Node B Port
ANT Port
DC/AISG Port
%
o
C
Outline Drawing
BT-R2S2 outline
drawing reference
109
Issued:Sep10
Control:3-0-1
1/1
Provide constant +12VDC power via Bias Tee and alarm handling for up
to 6 TMAs
PDM-003B
Technical Specifications
Input power
VDC
-48 or +24
20
Output Voltage
VDC
+12
mA
Supply Voltage
Input Voltage Fluctuation
Output Power
350
Number of Outputs
2 or 6
mm (in)
Weight
45x482x152 (1.8x18.9x6.0)
kg (lb)
2.5 (5.5)
Light Grey
Enclosure Color
Aluminum
Enclosure Material
Operating Temperature
-10 to +50
Operating Humidity
<95
EMC
Environmental Class
PDM Connectors
All connectors are polarized to ensure correct cable is used and fitted properly. The description of each pin is shown in Table
1. Pin number is labelled from left to right whilst looking into the front panel.
Unit C
VoutA
VoutB
ALARM1 ALARM2
--
POWER
+24V GND -48V
VIN
ATT trimmer
+12V Output Power LED
Power in LED
Normally Open
Normally Closed
PDM-003B front-panel
110
Issued: May09
Control: 3-0-0
1/2
Connectors
4
-48VDC
+24VDC
Ground
Ground
Ground
Ground
ALARM1
ALARM2
Descriptions
Four-pin power input connector. The PDM is fed with -48VDC or +24VDC via this port.
VIN
This three-pin connector provides DC power supply to the TMA. It is connected to the +12VDC
power input connector (SMA-J) of the Bias Tee
This Two-pin connector connects to the BTS alarm terminal for alarm reporting purposes.
When connect to BTS Normally open, connect this PIN, Alarm is sent to the BTS using relay*.
This occurs when LNA is faulty or when PDM output voltage is outside the range of 11.75V to
12.25V. Under this condition, the auto bypass switch will be activated to ensure that the UL
signals are still received by the BTS.
ALARM1
This Two-pin connector connects to the BTS alarm terminal for alarm reporting purposes.
When connect to BTS Normally Closed, connect this PIN, Alarm is sent to the BTS using relay*.
This occurs when LNA is faulty or when PDM output voltage is outside the range of 11.75V to
12.25V. Under this condition, the auto bypass switch will be activated to ensure that the UL
signals are still received by the BTS.
ALARM2
Outline Drawing
C
t
i
n
U
B
t
i
n
U
A
t
i
n
U
R
E
W
O
P
2
M
R
A
L
A
1
M
R
A
L
A
B
t
u
o
V
A
t
u
o
V
R
E
W
O
P
2
M
R
A
L
A
1
M
R
A
L
A
B
t
u
o
V
A
t
u
o
V
R
E
W
O
P
2
M
R
A
L
A
1
M
R
A
L
A
B
t
u
o
V
A
t
u
o
V
+ 24V
GND
-48V
VIN
Note: The figure above shows front panel of the PDM-003B. The connections within each unit are the same. Each unit has one
LED indicator with one LED indicator for every output. PDM-001B just has one unit (Unit A).
111
Issued: May09
Control: 3-0-0
2/2
Indoor Diplexer
CM-BK2-IN1B
Features and Product Description
z
z
z
z
z
Compact and cost effective solutions for combining two different input frequency
bands into one common output.
Combines GSM/CDMA and DCS/WCDMA bands.
Low loss maximizes system performance.
High isolation minimizes interference.
Fast and easy installation.
Technical Specification
Electrical
Frequency Range
Bandwidth
Isolation between Bands
Input Power
Insertion Loss
Return Loss
3rd Order Intermodulation
Impedance
MHz
MHz
dB
W
dB
dB
dBc
800 960(Port 2)
160
80@1710MHz-2170MHz
1710 2170(Port 3)
460
80@800MHz-960MHz
100
0.3
20
-140 @2x43dBm
50
Mechanical
Dimension (LxWxH)
Weight
Material and Color
Connector Type
Operational Temperature
Operational Humidity
Environmental Class
mm (in)
kg (lb)
198x88x40 (7.8x3.5x1.6)
2.5 (5.5)
Aluminum, Grey
N-Female
-25 to 65
< 95
Indoor
C
%
Block Diagram
Port 1
COM
Port 2
800-960
Port 3
1710-2170
112
st
Issued: 1 Dec10
Control: 3-0-0
1/1
Indoor Diplexer
CM-BDW2-IN1
Features and Product Description
Compact and cost effective solutions for combining two different input frequency
bands into one common output.
Combines CDMA800, GSM, UMTS and 3G bands.
High power handling and low loss maximizes system performance.
High isolation minimizes interference.
Use for integrating new services into existing CDMA800/GSM900 in-building
systems.
Technical Specification
Electrical
Frequency Range
Input Power
Insertion Loss
MHz
W
800 960 MHz
1710 1880 MHz
1920 2170 MHz
Return Loss
Isolation between Bands
800 960 MHz
Pass Band Ripple
1710 1880 MHz
1920 2170 MHz
Impedance
800-960, 1710-1880
1920-2170
200
0.4
0.6
0.6
18
60
0.3
0.4
0.4
50
dB
dB
dB
dB
Mechanical
Dimension, LxWxH
Weight
Material and Color
Connector Type
Operational Temperature
Operational Humidity
Environmental Class
mm (in)
kg (lb)
198x166x48 (7.8x6.5x1.9)
1.8 (4.0)
Aluminum, Painted Grey
Type N-Female
-35 to +70
< 95
Indoor
C
%
Block Diagram
Port 3
Port 1
806-960,
1710-1880
Port 2
1920-2170
113
Issued:12Jan10
Control: 3-0-0
1/1
Indoor Triplexer
CM-BDW3-IN1B
Features and Product Description
Compact and cost effective combining of CDMA800, GSM900, GSM1800 and UMTS
signals.
100W power handling capability.
Low loss maximizes system performance.
High isolation minimizes interference.
Provide solutions for combining three different input frequency bands into one
common output.
Use for integrating new UMTS services into existing 2G in-building antenna
distribution systems.
Technical Specification
Electrical
Frequency Range
Input Power
Insertion Loss
Return Loss
Isolation
between Bands
MHz
W
dB
dB
2G / 2G
DCS / 3G
GSM / 3G
800 960
0.4
dB
dB
0.35
1710 1880
100
0.6
18
80
65
80
0.4
50
1920 2170
0.6
0.4
Mechanical
Dimension (L x W x H, excluding
connector)
Weight
Material and Color
Connector Type
Operational Temperature
Operational Humidity
Environmental Class
mm
198 x 166 x 40
kg
3.5
Aluminum, Grey
Type N-Female
-40 to +85
< 95
Indoor
C
%
166
198
114
40
Issued: 19Feb09
Control: 3-1-0
1/1
Indoor Diplexer
CM-DW2-IN1
Features and Product Description
Compact and cost effective solutions for combining GSM1800 and UMTS2100
bands.
Low loss maximizes system performance.
High isolation minimizes interference.
Fast and easy installation.
Technical Specification
Electrical
Frequency Range
Insertion Loss
Isolation between Bands
Input Average Power
Return Loss
Intermodulation@2x43dBm in Tx
Impedance
MHz
dB
dB
W
dB
1710 - 1880
1920 - 2170
0.6
> 60
100
20
-140
50
mm (in)
142x112x34 (5.6x4.4x1.3)
kg (lb)
2.0 (4.4)
Aluminum, Grey
N-Female
-40 to +65
< 95
Indoor
Mechanical
Dimension, LxWxH (excluding
connectors)
Weight
Material and Color
Connector Type
Operational Temperature
Operational Humidity
Environmental Class
C
%
Block Diagram
Port 3
Port 1
1710-1880
Port 2
1920-2170
115
Issued: 12Jan10
Control: 3-0-1
1/1
Diplexer
CM-KY2-IN1
Features and Product Description
Compact and cost effective solutions for combining GSM1800/UMTS2100 and LTE
frequency bands.
Low loss maximizes system performance.
High isolation minimizes interference.
Fast and easy installation.
Technical Specification
Electrical
Frequency Range
Insertion Loss
Isolation between Bands
Input Power
Return Loss
Intermodulation@2x43dBm in Tx
Impedance
MHz
dB
dB
W
dB
1710-2170
2400-2700
0.2
> 50
250
20
-140
50
mm (in)
169x109x42.5 (6.7x4.3x1.7)
kg (lb)
2.0 (4.4)
Aluminum, Grey
N-Female
-40 to +65
< 95
Indoor
Mechanical
Dimension (LxWxH, excluding
connectors)
Weight
Material and Color
Connector Type
Operational Temperature Range
Operational Humidity
Environmental Class
C
%
Outline Drawing
42.5
4- 4.5
57
99
109
DCS/WCDMA
26
54.5
COM
WLAN/LTE
16.5
34.5
159
169
116
16.5
Issued: Aug09
Control: 3-0-0
1/1
Indoor Diplexer
CM-ML2-IN2
Features and Product Description
Compact and cost effective solutions for combining two different input frequency
bands into one common output.
Designed for in-house multi-band distribution networks.
Low loss- maximizes system performance.
High isolation- minimizes interference.
DC by-pass between low frequency band port and COM port.
Technical Specification
Electrical
Frequency Range
Insertion Loss
Isolation between Bands
Input Power
Return Loss
PIM
Impedance
MHz
dB
dB
W
dB
dBc
50 - 2200
2400 - 2500
0.4
> 50
200
20
-140 @2x43dBm
50
Mechanical
Dimension (LxWxH)
Weight
Material and Color
Connector Type
Operational Temperature
Operational Humidity
Environmental Class
mm (in)
kg (lb)
153.5x86x37.4 (6.0x3.4x1.5)
2.0 (4.4)
Aluminum, Grey
N-Female
-20 to +65
< 95
Indoor
C
%
Block Diagram
DC/AISG Bypass
Port 3
Port 1
50-2200
Port 2
2400-2500
117
Issued: 29Dec09
Control: 3-0-0
1/1
Wideband Diplexer
CM-BK2-ODxx, CM-BK2D-ODxx (x= 1, 2, 3 or 4, Preconfigured DC-pass)
CM-BK2D-ODxC shown
Technical Specifications
Electrical
Pass Band Frequency Range
Insertion Loss
MHz
dB
dB
Return Loss
Maximum input power pre port
Maximum output power at Common Port
Intermodulation Products
Impedance
dB
W
W
dBc
806-960
0.2
250
1710-2170
0.3
60 @806-960MHz
80 @1710-2170MHz
21
250
500
-155 @2x43dBm
50
Mechanical
Dimensions, LxWxH
(including mounting brackets)
Weight
(including mounting brackets)
Colors
Housing
RF Connectors
Mounting Kit
Single unit
Double unit
Single unit
Double unit
309x105x89 (12.2x4.1x3.5)
303x133x124 (11.9x5.2x4.9)
2.5 (5.5)
4.0 (8.8)
Light Grey
Aluminum
7/16 DIN-Female
Pole (clamps included for 35-125mm) or wall mounted
mm (in)
kg (lb)
Environmental Characteristics
o
C
%
-40 to +65
<95
IP66 (Indoor or Outdoor)
ETS 300 342-3
Comply with IEC 61000-4-5; 8kA, 8/20s
> 1,000,000
hr
DC Bypass Optional
No DC Path
DC Path in Low Frequency Band
DC Path in High Frequency Band
Full DC Path
Port 1
806-960
DC/AISG Bypass
DC/AISG Bypass
Port 3
Port 2
1710-2170
118
Issued: Jun10
Control: 3-5-0
1/1
Diplexer
CM-DW2-ODxx, CM-DW2D-ODxx (x= 1, 2, 3 or 4, Preconfigured DC-pass)
CM-DW2D-ODxC shown
Technical Specifications
Electrical
Pass Band Frequency Range
Insertion Loss
Isolation between Bands
Return Loss
Maximum input power pre port
Maximum output power at Common Port
Intermodulation Products
Impedance
MHz
dB
dB
dB
W
W
dBc
1710-1880
0.3
1920-2170
0.3
50
20
250
250
500
-155 @2x43dBm
50
Mechanical
Dimensions, LxWxH
(including mounting brackets)
Weight
(including mounting brackets)
Colors
Housing
Connector Type
Mount Kit
Single Unit
Double Unit
Single Unit
Double Unit
mm (in)
mm (in)
kg (lb)
kg (lb)
332x146x86 (13.1x5.7x3.4)
303x173x106 (11.9x6.8x4.2)
3.5 (7.7)
6.0 (13.2)
Light Grey
Aluminum
7/16 DIN-Female
Pole (clamps included for 35-125mm Pole) or Wall mount
Environmental Characteristics
o
C
%
-40 to +65
<95
IP66 (Indoor or Outdoor)
ETS 300 342-3
Comply with IEC 61000-4-5; 8kA, 8/20s
> 1,000,000
hr
DC Bypass Optional
No DC Path
DC Path in Low Frequency Band
DC Path in High Frequency Band
Full DC Path
Port 1
1710-1880
DC/AISG Bypass
DC/AISG Bypass
Port 3
Port 2
1920-2170
119
Issued: Jun10
Control: 3-5-0
1/1
Triple-band Combiner
CM-BDW3-ODxx, CM-BDW3D-ODxx (x= 1, 2 or 6, Preconfigured DC-pass)
Technical Specifications
Electrical
Pass Band Frequency Range
Insertion Loss
MHz
dB
dB
Return Loss
Maximum input power pre port
Maximum output power at Common Port
Intermodulation Products
Impedance
dB
W
W
dBc
806-960
0.2
250
1710-1880
1920-2170
0.3
0.3
50 (806-960/1710-1880MHz)
50 (806-960/1920-2170MHz)
50 (1710-1880/1920-2170MHz)
20
250
250
750
-155 @2x43dBm
50
Mechanical
Dimensions, LxWxH
(including mounting brackets)
Weight
(including mounting brackets)
Colors
Housing
RF Connectors
Mount Kit
Single Unit
Double Unit
Single Unit
Double Unit
Environmental Characteristics
Operating Temperature Range
Operational Humidity
Environment Class
EMC
Lightning Protection
MTBF
mm (in)
mm (in)
kg (lb)
kg (lb)
326x185x87 (12.8x7.3x3.4)
316x202x112 (12.4x8.0x4.4)
4 (8.8)
7 (15.4)
Light grey
Aluminum
7/16 DIN-Female
Pole (clamps included for 35-125mm Pole) or Wall mount
C
%
-40 to +65
<95
IP66 (Indoor or Outdoor)
ETS 300 342-3
Comply with IEC 61000-4-5; 8kA, 8/20s
> 1,000,000
hr
DC Bypass Optional
No DC Path
DC Path in Low Frequency Band
DC Path in Mid Frequency Band
DC Path in High Frequency Band
DC Path in Mid and High Frequency Band
Full DC Path
Port 1
806-960
DC Bypass
DC Bypass
DC Bypass
Port 4
Port 2
1710-1880
Port 3
1920-2170
120
Issued: Jun10
Control: 3-6-0
1/1
Wideband Diplexer
CM-KY2-OD4B
Features and Product Description
Technical Specifications
Electrical
Pass Band Frequency Range
Insertion Loss
Isolation between Bands
Return Loss
Power Handling
Intermodulation Products
Impedance
MHz
dB
dB
dB
W
dBc
1710-2170
0.3
2300-2700
0.3
70
20
300
-155 @2 x 43dBm
50
Mechanical
Dimension (LxWxH including mounting
brackets)
Weight
Colors
Housing
RF Connectors
Mounting Kit
mm (in)
275x121x90(10.8x4.8x3.5)
kg (lb)
2.3(5.1)
Light grey
Aluminum
DIN 7/16 female
Pole (clamps included for 35-125mm) or wall mounted
Environmental Characteristics
o
C
%
-40 to +65
<95
IP67
ETS 300 342-3
Comply with IEC 61000-4-5; 8kA, 8/20s
> 1,000,000
hr
Block Diagram
Port 1
1710-2170
DC/AISG Bypass
DC/AISG Bypass
Port 3
Port 2
2300-2700
121
Issued: Nov.12
Control: 2-0-0
1/1
Triple-band Combiner
CM-BKY3-OD6
Technical Specifications
Electrical
Pass Band Frequency Range
Insertion Loss
MHz
dB
dB
Return Loss
Maximum input power per port
Maximum output power at common port
Intermodulation Products
Impedance
dB
W
W
dBc
806-960
1710-2170
2300-2690
0.3
80 (806-960/1710-2170MHz)
80 (806-960/2300-2690MHz)
70 (1710-2170/2300-2690MHz)
20
250
250
750
-155 @2x43dBm
50
250
Mechanical
Dimensions, LxWxH
(excluding connectors and mounting brackets)
Weight
(including mounting brackets)
Colors
Housing
RF Connectors
Mount Kit
Environmental Characteristics
Operating Temperature Range
Operational Humidity
Environment Class
EMC
Lightning Protection
MTBF
mm (in)
14215657(5.596.142.24)
kg (lb)
2.5(5.51)
Light grey
Aluminum
7/16 DIN-Female
Pole (clamps included for 35-125mm Pole) or Wall mount
C
%
-40 to +65
<95
IP66
ETS 300 342-3
Comply with IEC 61000-4-5; 8kA, 8/20s
> 1,000,000
hr
Port 1
806-960
DC Bypass
DC Bypass
DC Bypass
Port 4
Port 2
1710-2170
Port 3
2300-2690
122
Issued: June10
Control: 3-0-0
1/1
Quad-band Combiner
CM-BDWY4-OD8
Technical Specifications
Electrical
Pass Band Frequency Range
Insertion Loss
Isolation between Bands
Return Loss
Maximum input power per port
Intermodulation Products
Impedance
MHz
dB
dB
dB
W
dBc
806-960
1710-1880
1920-2170
2500-2690
0.3
50
20
250
250
250
-155 @2x43dBm
50
250
Mechanical
Dimensions, LxWxH
(excluding connectors and mounting brackets)
Weight(approx.)
Colors
Housing
RF Connectors
Environmental Characteristics
Operating Temperature Range
Operational Humidity
Environment Class
EMC
Lightning Protection
MTBF
mm (in)
239x210x59.5(9.5x8.3x2.4)
kg (lb)
4.2(9.2)
Light grey
Aluminum
7/16 DIN-Female
C
%
-40 to +65
<95
hr
IP66(Indoor or Outdoor)
ETS 300 342-3
Comply with IEC 61000-4-5; 8kA, 8/20s
> 1,000,000
Block Diagram
Port 1
806-960
Port2
1710-1880
Port 3
1920-2170
DC Bypass
DC Bypass
DC Bypass
DC Bypass
Port 5
Port 4
2500-2690
123
Issued: Feb11
Control: 2-0-0
1/1
Wideband Diplexer
CM-MY2-OD4
Technical Specifications
Electrical
Pass Band Frequency Range
Insertion Loss
Isolation between Bands
Return Loss
Maximum input power per port
Maximum output power at common port
Intermodulation Products
Impedance
MHz
dB
dB
dB
W
W
dBc
806-960/1710-2170
2300-2700
0.3
70
20
250
250
500
-155 @2x43dBm
50
Mechanical
Dimensions, LxWxH
(including mounting brackets)
Weight
(including mounting brackets)
Colors
Housing
RF Connectors
Mounting Kit
mm (in)
14215657(5.596.142.24)
kg (lb)
2.4(5.29)
Light Grey
Aluminum
7/16 DIN-Female
Pole (clamps included for 35-125mm) or wall mounted
Environmental Characteristics
o
C
%
-40 to +65
<95
IP66
ETS 300 342-3
Comply with IEC 61000-4-5; 8kA, 8/20s
> 1,000,000
hr
DC/AISG Bypass
DC/AISG Bypass
Port 3
Port 2
2300-2700
Port 1
806-960/
1710-2170
124
Issued: Mar.12
Control: 2-0-0
1/1
Dual-Band Combiner
CM-PK2-OD4
Features and Product Description
Technical Specifications
Electrical
Pass Band Frequency Range
Insertion Loss
Isolation between Bands
Return Loss
Power Handling Continuous
Power Handling Continuous at Common Port
Intermodulation Products
Impedance
MHz
dB
dB
dB
W
W
dBc
1850-1910/1930-1990
0.3
1710-1755/2110-2155
0.2
50
20
250
250
500 average
-155 @2 x 43dBm
50
Mechanical
Dimension (LxWxH including mounting
brackets)
Weight
Colors
Housing
RF Connectors
Mounting Kit
mm (in)
302x143x79(11.9x5.6x3.1)
kg (lb)
2.1(4.6)
Light grey
Aluminum
DIN 7/16 female
Pole (clamps included for 35-125mm) or wall mounted
Environmental Characteristics
o
C
%
-40 to +65
<95
IP66 (Indoor or Outdoor)
ETS 300 342-3
Comply with IEC 61000-4-5; 8kA, 8/20s
> 1,000,000
hr
Block Diagram
Port 1
1850-1910/
1930-1990
DC/AISG Bypass
DC/AISG Bypass
Port 3
Port 2
1710-1755/
2110-2155
125
Issued: Dec10
Control: 2-0-0
1/1
Wideband Diplexer
Band 1: 380-960MHz Band 2: 1710-2700MHz
CM-FK2-ODx, CM-FK2D-ODx (x= 1, 2, 3 or 4, Preconfigured DC-pass)
Extra wideband design for feeder sharing between systems in the 380-960MHz
range and the 1710-2700MHz range.
Long connectors allow ease of waterproofing.
High power handling and low loss maximizes system performance..
Built with optional DC bypass, to be used with Tower Mounted Amplifiers and
AISG compliant devices.
Wall or pole mounting available
Available as a single unit or double unit
Technical Specifications
Electrical
Pass Band Frequency Range
Insertion Loss
Isolation between Bands
Return Loss
Maximum input power per port
Intermodulation Products
Impedance
MHz
dB
dB
dB
W
dBc
380-960
0.2
1710-2700
0.2
60
20
300
500
-155 @2 x 43dBm
50
Mechanical
Dimension (LxWxH) (including
connectors and mounting kits)
Weight (include
connectors
and mounting kits)
Colors
Housing
RF Connectors
Mounting Kit
Single unit
Double unit
Single unit
Double unit
309x110x82(12.2x4.3x3.2)
309x110x135(12.2x4.3x5.3)
3.0(6.6)
5.5(12.1)
Light grey
Aluminum
DIN 7/16 female
Pole (clamps included for 35-125mm) or wall mounted
mm (in)
kg (lb)
Environmental Characteristics
o
C
%
-40 to +65
<95
IP66
ETS 300 342-3
Comply with IEC 61000-4-5; 8kA, 8/20s
> 1,000,000
hr
DC Bypass Optional
No DC Path
DC Path in Low Frequency Band
DC Path in High Frequency Band
Full DC Path
Port 1
380-960
DC/AISG Bypass
DC/AISG Bypass
Port 3
Port 2
1710-2700
126
Issued: Nov.12
Control: 1-0-0
1/1
Triple-band Combiner
Band 1: 380-960MHz Band 2: 1710-1880MHz Band3:1920-2170MHz
CM-FDW3-ODx, CM-FDW3D-ODx (x= 1, 2 or 6, Preconfigured DC-pass)
Technical Specifications
Electrical
Pass Band Frequency Range
Insertion Loss
MHz
dB
dB
Return Loss
Maximum input power pre port
Intermodulation Products
Impedance
dB
W
dBc
380-960
0.3
250
1710-1880
1920-2170
0.3
0.3
50 (380-960/1710-1880MHz)
50 (380-960/1920-2170MHz)
50 (1710-1880/1920-2170MHz)
20
250
250
-155 @2x43dBm
50
Mechanical
Dimensions, LxWxH
(including mounting brackets)
Weight
(including mounting brackets)
Colors
Housing
RF Connectors
Mount Kit
Single Unit
Double Unit
Single Unit
Double Unit
mm (in)
mm (in)
kg (lb)
kg (lb)
349x190x84(13.7x7.5x3.3)
349x190x136(13.7x7.5x5.4)
3.2(7.1)
6.4(14.1)
Light grey
Aluminum
7/16 DIN-Female
Pole (clamps included for 35-125mm Pole) or Wall mount
Environmental Characteristics
o
C
%
-40 to +65
<95
IP66 (Indoor or Outdoor)
ETS 300 342-3
Comply with IEC 61000-4-5; 8kA, 8/20s
> 1,000,000
hr
DC Bypass Optional
No DC Path
DC Path in Low Frequency Band
DC Path in Mid Frequency Band
DC Path in High Frequency Band
DC Path in Mid and High Frequency Band
Full DC Path
DC Bypass
Port 1
380-960
DC Bypass
Port 4
DC Bypass
Port 2
1710-1880
Port 3
1920-2170
127
Issued: Nov.12
Control: 1-0-0
1/1
Triple-band Combiner
Band 1: 380-960MHz Band 2: 1710-2170MHz Band3:2300-2690MHz
CM-FKY3-ODx, CM-FKY3D-ODx (x= 1, 2 or 6, Preconfigured DC-pass)
Technical Specifications
Electrical
Pass Band Frequency Range
Insertion Loss
MHz
dB
dB
Return Loss
Maximum input power per port
Intermodulation Products
Impedance
dB
W
dBc
380-960
250
1710-2170
2300-2690
0.3
60 (380-960/1710-2170MHz)
60 (380-960/2300-2690MHz)
55 (1710-2170/2300-2690MHz)
20
250
250
-155 @2x43dBm
50
Mechanical
Single Unit
Double Unit
Single Unit
Double Unit
Dimensions, LxWxH
(including mounting brackets)
Weight
(including mounting brackets)
Colors
Housing
RF Connectors
Mount Kit
321x167x81(12.6x6.6x3.2)
321x167x130(12.6x6.6x5.1)
2.7(5.9)
5.6(12.3)
Light grey
Aluminum
7/16 DIN-Female
Pole (clamps included for 35-125mm Pole) or Wall mount
mm (in)
kg (lb)
Environmental Characteristics
o
C
%
-40 to +65
<95
IP66
ETS 300 342-3
Comply with IEC 61000-4-5; 8kA, 8/20s
> 1,000,000
hr
DC Bypass Optional
No DC Path
DC Path in Low Frequency Band
DC Path in Mid Frequency Band
DC Path in High Frequency Band
DC Path in Mid and High Frequency Band
Full DC Path
Port 1
380-960
DC Bypass
DC Bypass
Port 4
DC Bypass
Port 2
1710-2170
Port 3
2300-2690
128
Issued: Nov.2012
Control: 1-0-0
1/1
Quad-band Combiner
Band 1: 380-960MHz Band 2: 1710-1880MHz Band3:1920-2170MHz
Band4:2500-2690MHz
CM-FDWY4-ODx,CM-FDWY4D-ODx(x= 1, 2 or 8, Preconfigured DC-pass)
Technical Specifications
Electrical
Pass Band Frequency Range
Insertion Loss
Isolation between Bands
Return Loss
Maximum input power per port
Intermodulation Products
Impedance
MHz
dB
dB
dB
W
dBc
380-960
1710-1880
1920-2170
0.3
50
20
250
250
-155 @2x43dBm
50
250
2500-2690
250
Mechanical
Dimensions,
connectors
brackets)
LxWxH(including
and
mounting
Single Unit
Double Unit
Single Unit
Double Unit
Weight(approx.)
370x210x84(14.6x8.3x3.3)
mm
(in)
370x210x138(14.6x8.3x5.4)
3.8(8.4)
7.8(17.2)
Light grey
Aluminum
7/16 DIN-Female
Pole (clamps included for 35-125mm Pole) or Wall mount
kg (lb)
Colors
Housing
RF Connectors
Mount Kit
Environmental Characteristics
o
C
%
-40 to +65
<95
IP66(Indoor or Outdoor)
ETS 300 342-3
Comply with IEC 61000-4-5; 8kA, 8/20s
> 1,000,000
hr
Port 1
380-960
-
Port2
1710-1880
DC Bypass Optional
No DC Path
DC Path in F Frequency Band
DC Path in D Frequency Band
DC Path in W Frequency Band
DC Path in Y Frequency Band
Full DC Path
Port 3
1920-2170
DC Bypass
DC Bypass
DC Bypass
DC Bypass
Port 4
2500-2690
129
FP-G75-D01
885-915/930-960MHz Band Pass Filter
Features and Product Description
Technical Specifications
Electrical
Pass band
Out band rejection
Insertion Loss
Uplink: 885-915
Downlink:930-960
45dB@869-882.5
1.0
1.5
0.5
1.3
100
500@+60C 1atm
< -155 @2 x 43dBm
50
MHz
MHz
Rx (886-915 MHz)
Rx (885-886 MHz)
Tx (930-960 MHz)
VSWR
Power Handling(average)
Peak power handling
PIM
Impedance
dB
W
W
dBc
Mechanical
Dimension (L x W x H) with mounting bracket
Weight (approx.)
DC / ASIG By-Pass
Material
Connector Type
Operational Humidity
Operational Temperature
Environmental Class
Lightning Protection
Installation
MTBF
mm
kg
445x126x92
2.8
By pass available, 40V / 3A
Aluminum
7/16 DIN-Female
< 95
-10 to +60
Indoor
Comply with IEC 61000-4-5; 8kA, 8/20s
Wall or Pole
> 500,000
%
C
hr
Block Diagram
130
Issued: Apr11
Control: 2-1-1
1/1
FP-C59-D01
824-837.5/869-882.5MHz Band Pass Filter
Features and Product Description
Technical Specifications
Electrical
W
W
dBc
Uplink: 824-837.5
Downlink:869-882.5
50dB@885-915
3.5 the lower the better
1.3
100
500@+60C 1atm
< -155 @2 x 43dBm
50
mm
278x100x47
kg
<5
Aluminum
7/16 DIN-Female
No
< 95
0 to +60
Indoor
No
Wall or Pole
> 500,000
Pass band
MHz
MHz
dB
Mechanical
Dimension (L x W x H)
(exclude connectors and brackets)
Weight (approx.)
Material
Connector Type
Bypass function
Operational Humidity
Operational Temperature
Environmental Class
Lightning Protection
Installation
MTBF
%
C
hr
Block Diagram
131
Issued:Feb12
Control: 0-0-1
1/1
FP-G1216-D02
907-960MHz GSM Band Pass Filter
Features and Product Description
Technical Specifications
Electrical
Frequency Range
MHz
Bandwidth
Power Handling
Insertion Loss
Return Loss
In-Band Ripple
Out-of-Band Rejection
PIM
Impedance
MHz
W
dB
dB
dB
dB
dBc
Uplink: 907-915
Downlink: 952-960
53
100
1.0
18
0.8
50 @ 869-894MHz
-155 @2 x 43dBm
50
Mechanical
Dimension (L x W x H)
Weight (approx.)
Material
Connector Type
Operational Humidity
Operational Temperature
Environmental Class
mm
kg
%
C
47
Port1
Port2
Port3
Port4
152
64
Outline Drawing
157
287
132
st
Issued:1 June11
Control: 1-0-0
1/1
FP-G1216-D01
903-915/ 948-960MHz GSM Band Pass Filter
Features and Product Description
Technical Specifications
Electrical
Frequency Range
MHz
Bandwidth
Power Handling
Insertion Loss
MHz
W
dB
Return Loss
dB
In-Band Ripple
Out-of-Band Rejection at normal temperature
Out-of-Band Rejection at -40C and +85C
PIM
Impedance
dB
dB
dB
dBc
Uplink: 903-915
Downlink: 948-960
12
100
1.0
18
17(-40C to +85C)
0.8
48 @ 869-894MHz
45 @ 869-894MHz
-150 @2 x 43dBm
50
Mechanical
Dimension (L x W x H)
Weight (approx.)
Material
Connector Type
Operational Humidity
Operational Temperature
Environmental Class
mm
kg
%
C
47
Port1
Port2
Port3
Port4
152
64
Outline Drawing
157
287
133
Issued:24Aug2010
Control: 2-0-0
1/1
FP-G15D-OD01
900.1-915/945.1-960MHz Band Pass Filter
Features and Product Description
Technical Specifications
Electrical Characteristics
Pass band
Out band rejection
Insertion Loss
dB
W
W
dBc
RX:900.1-915
TX:945.1-960
30dB@869-894
1.0
0.4
20
100
800
<-150@2 x 43dBm
50
mm
157 x 152 x 47
kg
3
By pass available, 40V / 3A
Aluminum
7/16 DIN-Female
< 95
-40 to +65
Outdoor
Comply with IEC 61000-4-5; 8kA, 8/20s
Wall or Pole
> 500,000
MHz
MHz
Rx (900.1-915 MHz)
Tx (945.1-960 MHz)
Return Loss
Power Handling(average)
Peak power handling
PIM
Impedance
dB
Mechanical Characteristics
Dimension (L x W x H, without mounting bracket
and connectors)
Weight (approx.)
DC / AISG By-Pass
Material
Connector Type
Operational Humidity
Operational Temperature
Environmental Class
Lightning Protection
Installation
MTBF
%
C
hr
Block Diagram
134
th
Issued: 9 Mar.12
Control: 1-0-1
1/2
FP-G15D-OD01
900.1-915/945.1-960MHz Band Pass Filter
Outline Drawing
135
th
Issued: 9 Mar.12
Control: 1-0-1
2/2
FP-C22-D01
824-846.5/869-891.5MHz Band Pass Filter
Features and Product Description
Technical Specifications
Electrical
Stop band Frequency Range
MHz
Bandwidth
Insertion Loss
Return Loss
Power Handling(average)
Peak power handling
Out-of-Band Rejection
PIM
Impedance
MHz
dB
dB
W
W
dB
dBc
Uplink: 824-846.5
Downlink:869-891.5
22.5
< 1.4
> 18
100
800
> 54@ 851-866MHz
< -155 @2 x 46dBm
50
Mechanical
Dimension (L x W x H)
Weight (approx.)
Material
Connector Type
Bypass function
Max DC bypass current
Operational Humidity
Operational Temperature
Environmental Class
Lightning Protection
Installation
MTBF
mm
kg
A
%
C
hr
Block Diagram
136
Issued:Sep10
Control: 0-0-0
1/1
FP-C60-D01
824-884 UMTS850 Band Pass Filter
Features and Product Description
No tuning required.
Low Return Loss maximizes system performance.
Good Intermodulation.
Compact minimizes space requirements
Outdoor application.
Technical Specifications
Electrical
Pass Band Frequency Range
Stop Band
Power Handling
MHz
MHz
W
Insertion Loss
VSWR
Out-of-Band Rejection
dB
dB
dB
PIM
dBc
Impedance
824-884
897.5-915
>80W (average power WCDMA signal, 869 - 884 MHz)
>400W (peak power, 869 - 884 MHz)
1.0
<1.35
50 @ 897.5-915MHz
IM3:<-150dBc @2x43dBm carrier
IM7:<-160dBc @2x43dBm carrier
50
Mechanical
Dimension (L x W x H)
Weight (approx.)
Material
Connector Type
DC, AISG by-pass
Lightning Protection
Operational Humidity
Operational Temperature
Environmental Class
mm
kg
178x92x53.5
2
Sliver plated aluminum unpainted
7/16 DIN-Female
Support
Comply with IEC 61000-4-5; 8kA, 8/20s
< 95
0 to +65
Outdoor(IP66)
%
C
137
Issued:27June11
Control:2-0-0
1/1
DU-E7030-D01
885-915/ 930-960MHz EGSM Duplexer
Features and Product Description
Technical Specifications
Electrical
Frequency Range
RX
TX
Bandwidth
Average Power Handling
Insertion Loss
Return Loss
TX/RX Isolation
PIM @2x43dBm
Impedance
885-915
930-960
30
150
1.0
18
70
< -155REVERSE
50
MHz
MHz
W
dB
dB
dB
dBc
Mechanical
Dimension (L x W x H) (approx.)
Weight (approx.)
Material
Connector Type
Mounting Bracket
Operational Humidity
Operational Temperature
Environmental Class
mm
kg
157x284x76.5
2.5
Aluminum
7/16 Din-Female
Wall Mount/Pole Mount
< 95
-20 to +60
Indoor
%
C
138
st
Issued:1 Sep11
Control: 1-0-0
1/1
DU-D8005-D03
1710-1785/ 1805-1880MHz GSM1800 Duplexer
Features and Product Description
Technical Specifications
Electrical
Frequency Range
RX
TX
Bandwidth
Average Power Handling
Insertion Loss
Return Loss
TX/RX Isolation
PIM
Impedance
1710-1785
1805-1880
75
100
0.6
>20
80
< -150@2x43dBm
50
MHz
MHz
W
dB
dB
dB
dBc
Mechanical
Dimension (L x W x H)
Weight (approx.)
Material
Connector Type
Operational Humidity
Operational Temperature
Environmental Class
mm
kg
248x210x36
3.0
Aluminum
7/16 Din-Female
%
< 95
C
-10 to +50
Indoor
Note: Measurements taken at room temperature, unless otherwise stated.
139
th
Issued:4 Sep2011
Control: 0-0-1
1/1
FP-G11D-OD01
902.1-913.1/947.1-958.1MHz Band Pass Filter
Features and Product Description
Technical Specifications
Electrical Characteristics
Pass band
Out band rejection
Insertion Loss
RX:902.1-913.1
TX:947.1-958.1
35dB@869-894
1.0
0.4
20
100
800
<-150@2 x 43dBm
50
MHz
MHz
Rx (902.1-913.1 MHz)
Tx (947.1-958.1 MHz)
Return Loss
Power Handling(average)
Peak power handling
PIM
Impedance
dB
dB
W
W
dBc
Mechanical Characteristics
Dimension (L x W x H, excluding mounting
bracket and connectors)
Weight (approx.)
DC / AISG By-Pass
Material
Connector Type
Operational Humidity
Operational Temperature
Environmental Class
Lightning Protection
Installation
MTBF
mm
(in)
kg (lb)
157x152x47(6.2x6.0x1.9)
3(6.6)
By pass available, 40V / 3A
Aluminum
7/16 DIN-Female
< 95
-40 to +65
Outdoor
Comply with IEC 61000-4-5; 8kA, 8/20s
Wall or Pole
> 500,000
%
C
hr
Block Diagram
140
Issued: Nov.12
Control: 2-0-0
1/2
FP-G11D-OD01
902.1-913.1/947.1-958.1MHz Band Pass Filter
Outline Drawing
141
th
Issued: 9 Mar.12
Control: 1-0-4
2/2
FP-G26D-D01
890.1-903.7/935.1-948.7 900MHz Band Pass Filter
Features and Product Description
No tuning required.
Low Return Loss maximizes system performance.
Good Intermodulation.
Compact minimizes space requirements
Outdoor application.
Dual Unit.
Technical Specifications
Electrical
dB
W
dBc
-160(IM3@2x43dBm)
ns
400,10(typ.)
ns
900
Absolute Delay in RX
Impedance
ns
1100
50
Mm(in)
334x395x176(13.1x15.6x6.9)
Kg(lb)
21(46.3)
Sliver plated aluminum unpainted
Port 1:BTS 7/16 DIN-Female
Port 2:ANT 7/16 DIN-Female
Pole (clamps included for 35-125mm Pole) or Wall mount
RX Band
TX Band
Out-of-Band Rejection
Insertion Loss
MHz
dB
890.1-903.7MHz
935.1-948.7MHz
890.1-903.7MHz
935.1-948.7MHz
Insertion Loss
Variation
Return Loss
Power Handling(Avg./Peak)
PIM
dB
dB
Mechanical
Dimension (L x W x H)
(excluding connectors and brackets)
Weight (approx.)
Material
Connector Type
Mount Kit
DC/AISG by-pass
Compliant to
Passband
Insertion Loss
Return Loss
Input Voltage/Current
MHz
dB
dB
Environmental Characteristics
Operating Temperature Range
Operational Humidity
Environment Class
EMC
Lightning Protection
MTBF
C
%
-10 to +60
<95
Outdoor(IP67)
ETS 300 342-3
Comply with IEC 61000-4-5; 8kA, 8/20s
> 1,000,000
hr
142
Issued:Nov.12
Control:2-0-0
1/1
FP-G26D-D01
890.1-903.7/935.1-948.7 900MHz Band Pass Filter
IN1
DC
OUT1
DC
IN2
DC
OUT2
DC
143
Issued:Nov.12
Control:2-0-0
1/1
FP-G26D-D01
890.1-903.7/935.1-948.7 900MHz Band Pass Filter
Simulation Curves
144
Issued:Nov.12
Control:2-0-0
1/1
Technical Specifications
Electrical
Frequency Range
Input Avg. Power, max at each port
Input Peak Power at each port
698-806MHz
Coupling Attenuation
806-2700MHz
698-2170MHz
Isolation between Bands
2170-2700MHz
Return Loss
PIM(3rd Order)
Impedance
MHz
W
W
dB
dB
dB
dB
dB
dBc
698-2700
100
1500
3.10.6
3.10.5
25*
23*
18
-155 @2x43dBm
50
mm (in)
260x190x86(10.3x7.5x3.4)
Mechanical
Dimension, LxWxH ( Excluding connectors
and brackets) ,approx.
Weight, approx.
Material
Inner Plating
Connector Type
Operational Temperature
Operational Humidity
Environmental Class
Mounting Kit
kg (lb)
C
%
6.6(14.5)
Aluminum
Silver
7/16 DIN-Female
-40 to +65
< 95
Indoor or Outdoor,IP66
Pole (clamps included for 35-125mm) or wall mounted
* Valid if all ports are terminated with 50 load
Block Diagram
145
Issued: Nov.2012
Control: 2-0-0
1
190
118.7
86.7
260
379
361
323
8.5
112.8
120
Diagram
146
Issued: Nov.2012
Control: 2-0-0
2
Technical Specifications
Electrical
Frequency Range
Input Avg. Power, max at each port
Peak Power, maximum
Insertion Loss
Coupling Value
Coupling Tolerance
Isolation between Bands
VSWR
PIM
Impedance
MHz
W
W
dB
dB
dB
dB
698-2700
150
1000
0.2
3.1
0.5
23*
1.2*
-140 @2x43dBm
50
dBc
Mechanical
Dimension, LxWxH
Weight
Material
Inner Plating
Connector Type
Operational Temperature
Operational Humidity
Environmental Class
mm (in)
kg (lb)
133x90x38 (5.2x3.5x1.5)
1.0 (2.2)
Aluminum
Silver
7-16 DIN-Female
-25 to +65
< 95
Indoor/Outdoor IP65
* Valid if all ports are terminated with 50 load
C
%
Outline Drawing
125
83
90
47
38
133
HC-R-OD150L
147
Issued: June2010
Control: 3-0-0
1
Technical Specifications
Electrical
Frequency Range
Input Avg. Power, max at each port
Peak Power, maximum
Insertion Loss
Coupling Value
Coupling Tolerance
Isolation between Bands
VSWR
PIM
Impedance
MHz
W
W
dB
dB
dB
dB
698-2700
150
1000
0.2
3.1
0.5
23*
1.2*
-140 @2x43dBm
50
dBc
Mechanical
Dimension, LxWxH
Weight
Material
Inner Plating
Connector Type
Operational Temperature
Operational Humidity
Environmental Class
mm (in)
kg (lb)
133x76x25 (5.2x3.0x1.0)
0.5 (1.1)
Aluminum
Silver
N-Female
-25 to +65
< 95
Indoor/Outdoor IP65
* Valid if all ports are terminated with 50 load
C
%
Outline Drawing
40
76
4 .5
125
83
133
25
HC-R-ON150L
148
Issued: June2010
Control: 3-0-0
1
Hybrid Coupler
HC-x-D200L, HC-x-N200L
Features and Product Description
Compact and cost effective combining of CDMA, GSM and UMTS signals.
200W power handling capability and inter-band isolation.
Low insertion loss.
Two combined output ports for split cable systems.
Integrating two operators services into an existing in-building antenna
distribution system.
HC-M-D200L shown
Technical Specification
Electrical
Frequency Range
Input Power
Dissipative Loss
Coupling Value
Isolation between Bands
Group Delay
Pass Band Ripple
VSWR
Impedance
MHz
W
dB
dB
dB
nsec
dB
B band
K band
M band
800 960
1710 2200
200
0.2
3
30
1
0.5
1.15 : 1
50
800 2500
0.15
35
1.10 : 1
0.3
25
1.20 : 1
Mechanical
Dimension
(L x W x H)
Weight
7/16 DIN-Female
Type N-Female
7/16 DIN-Female
Type N-Female
Material
Operational Temperature
Operational Humidity
Environmental Class
mm
kg
o
95 x 79.8 x 37
88 x 66 x 20
0.7
0.2
92 x 101 x 37
88 x 87 x 20
0.6
0.3
Aluminum
-30 to +75
< 95
Indoor
133 x 90 x 38
133 x 76 x 23
1
0.5
IP65
Ordering Information
Freq Band
800 960 MHz
1710 2200 MHz
800 2500 MHz
Type N connector
HC-B-N200L
HC-K-N200L
HC-M-N200L
149
th
Issued: 10 Mar11
Control: 3-0-3
1/1
The use of fewer than 4 inputs or outputs is possible. Any unused input ports have to be terminated with
low-power 50 loads, unused output ports have to be terminated with high-power 50 loads.
Technical Specification
Electrical
Frequency Range
Input Power
Insertion Loss
Coupling Value
Coupling Tolerance
Isolation between Bands
VSWR
Impedance
MHz
W
dB
dB
dB
dB
698-2700
60 max at each port
0.5
6.2
1.1
20*
1.2*
50
Mechanical
7/16 DIN-Female
Type N-Female
7/16 DIN-Female
Type N-Female
Dimensions
(L x W x H)
Weight
196x196xx36
183x183x26
3.1
1.7
Aluminum
-25 to +65
< 95
Indoor/Outdoor(IP65)
* Valid if all ports are terminated with 50 load
mm
kg
Material
Operational Temperature
Operational Humidity
Environmental Class
C
%
Outline Drawing
144
85
154
183
137
85
147
4-
196
144
137
5
4.
85
147
85
26
154
150
36
th
Issued:26 Aug11
Control: 0-0-0
1/1
Technical Specifications
Electrical
No. of Ways
Frequency Range
Average Power, maximum
Peak Power
Splitting Loss
In-band Ripple
Insertion loss
Input Port VSWR
PIM
Impedance
PS-R2-OD700C
PS-R3-OD700C
PS-R4-OD700C
2-way
3-way
698-2700
700
3000
4.8
0.2
0.1
< 1.25
-140 @2x43dBm
50
4-way
MHz
W
W
dB
dB
dB
3.0
< 1.20
dBc
6.0
< 1.30
Mechanical
Dimension, LxWxH
230x82x38
(9.1x3.2x1.5)
1.05 (2.3)
252x82x38
255x82x60
(9.9x3.2x1.5)
(10.0x3.2x2.4)
1.2 (2.7)
1.32 (2.9)
Aluminum
Silver
7-16 DIN-Female
-35 to +65
Wall mounted bracket provided
< 95
Indoor/Outdoor IP65
mm (in)
Weight
Material
Inner Plating
Connector Type
Operational Temperature
Mounting
Operational Humidity
Environmental Class
kg (lb)
38
82
PS-R2-OD700C
38
82
PS-R3-OD700C
82
Outline Drawing
PS-R4-OD700C
204
38
230
207
38
38
252
209
255
Mounting kits
38
60
151
Issued: Apr11
Control: 3-1-0
1
Technical Specifications
Electrical
No. of Ways
Frequency Range
Average Power, maximum
Peak Power
Splitting Loss
In-band Ripple
Insertion loss
Input Port VSWR
PIM
Impedance
MHz
W
W
dB
dB
dB
PS-R2-ON300C
PS-R3-ON300C
PS-R4-ON300C
2-way
3-way
698-2700
300
3000
4.8
0.2
0.1
< 1.25
-140 @2x43dBm
50
4-way
3.0
< 1.20
dBc
6.0
< 1.30
Mechanical
Dimension, LxWxH
mm (in)
Weight
Material
Inner Plating
Connector Type
Operational Temperature
Mounting
Operational Humidity
Environmental Class
kg (lb)
211x61x25
(8.3x2.4x1.0)
0.38 (0.8)
227x61x25
227x61x43
(8.9x2.4x1.0)
(8.9x2.4x1.7)
0.42 (0.9)
0.46 (1.0)
Aluminum
Silver
N-Female
-35 to +65
Wall mounted bracket provided
< 95
Indoor/Outdoor IP65
25
61
25
61
196
PS-R2-ON300C
PS-R3-ON300C
25
61
Outline Drawing
PS-R4-ON300C
25
211
197
227
197
227
25
Mounting kits
25
43
152
Issued: Apr2011
Control: 3-1-0
1
Technical Specifications
Electrical
No. of Ways
Frequency Range
Average Power at Input Port, maximum
Splitting Loss
Insertion loss
Input Port VSWR
Isolation between Ports
PIM
Impedance
PS-R2-ON50M
PS-R3-ON50M
PS-R4-ON50M
2-way
3-way
698-2700
50*
4.8
0.7
4-way
MHz
W
dB
dB
3.0
0.4
6.0
0.6
< 1.30
> 18
< 1.25
> 20
-130 @2x43dBm
50
dB
dBc
Mechanical
Dimension, LxWxH
mm (in)
Weight
Material
Inner Plating
Connector Type
Operational Temperature
Operational Humidity
Environmental Class
kg (lb)
C
%
107x59x22
(4.2x2.3x0.9)
0.2 (0.4)
135x91x22
129x121x22
(5.3x3.6x0.9)
(5.1x4.8x0.9)
0.5 (1.1)
0.6 (1.3)
Aluminum
Silver
N-Female
-25 to +65
< 95
Indoor and Outdoor (IP65)
*when output ports terminated to load(s) with VSWR<1.5:1
Outline Drawing
89
111
91
101
30
79
59
30
69
30
61
71
22
107
99
135
PS-R2-ON50M
22
PS-R3-ON50M
141
121
28
28
131
28
83
5
4.
93
22
129
PS-R4-ON50M
153
Issued: Oct.2012
Control: 3-0-3
1
Technical Specifications
Electrical
Frequency Range
Input Power
Dissipative loss
Splitting Loss
VSWR
3rd Order Intermodulation @ 2 43dBm Carrier
Impedance
MHz
W
dB
dB
2-way
3-way
4-way
3.0
800 2500
700
0.2
4.8
< 1.20 : 1
-140
50
6.0
dBc
Mechanical
Dimension (L x W x H)
Weight
Material
Connector Type
Operational Temperature
Operational Humidity
Environmental Class
mm
kg
230 x 82 x 38
1.13
C
%
259 x 82 x 38
1.25
Aluminum
7/16 DIN-Female
-30 to +75
< 95
Indoor
259 x 82 x 60
1.36
Ordering Information
2-way
3-way
4-way
Type N connector
154
Issued: 02Feb07
Control: 3-0-1
1/1
Technical Specifications
Electrical
2-way
Frequency Range
Input Power
Dissipative Loss
MHz
W
800 960, 1710 2170MHz
2200 2500MHz
Splitting Loss
Output Isolation
VSWR
0.3
0.8
3.0
dB
dB
dB
Impedance
3-way
800 2500
50
0.5
0.8
4.8
20
18
1.2 : 1
1.4 : 1
50
4-way
0.4
0.8
6.0
Mechanical
Dimension (L x W x H)
Weight
Material
Connector Type
Operational Temperature
Operational Humidity
Environmental Class
mm
kg
107.2 x 57 x 21
0.30
C
%
129.2 x 89 x 22
0.48
Aluminum
Type N-Female
-30 to +75
< 95
Indoor
129.2 x 119 x 22
0.64
Ordering Information
7/16 DIN connector
2-way
3-way
4-way
Type N connector
PS-N2-N50M
PS-N3-N50M
PS-N4-N50M
155
Issued: 02Feb07
Control: 3-0-1
1/1
Technical Specifications
Electrical
2-way
Frequency Range
Input Power
MHz
W
Dissipative Loss
dB
Splitting Loss
In-Band Ripple
VSWR
3rd Order Intermodulation @ 2 x 43dBm Carrier
Impedance
dB
dB
3-way
4-way
800 2500
200,avg; 1500,peak
0.1@800-2200MHz
0.15@2200-2500MHz
3.0
4.8
0.5
< 1.20 : 1
-140
50
dBc
6.0
Mechanical
Dimension (L x W x H)
Weight
Material
Connector Type
Operational Temperature
Operational Humidity
Environmental Class
mm
kg
211 x 61 x 25
0.29
C
%
229 x 61 x 25
0.34
Aluminum
Type N-Female
-25 to +75
< 95
Indoor
236 x 61 x 43
0.39
Ordering Information
7/16 DIN connector
2-way
3-way
4-way
Type N connector
PS-N2-N200C
PS-N3-N200C
PS-N4-N200C
156
Issued: 08Oct08
Control:3-2-0
1/1
Technical Specifications
Electrical
Frequency Range
Input Power
Dissipative Loss
Splitting Loss
VSWR
3rd Order Intermodulation @ 2 43dBm Carrier
Impedance
2-way
3-way
4-way
3.0
6.0
MHz
W
dB
dB
dBc
Mechanical
Dimension (L x W x H)
Weight
Material
Connector Type
Operational Humidity
Operational Temperature
Environmental Class
mm
kg
191 x 61 x25
0.26
C
%
222.8 x 61 x 25
0.31
Aluminum
Type N-Female
-35 to +75
< 95
IP55
222.8 x 61 x 43
0.37
Ordering Information
2-way
3-way
4-way
Type N connector
PS-Z2-N200C
PS-Z3-N200C
PS-Z4-N200C
157
Issued: 02Feb07
Control: 3-0-1
1/1
Wideband Coupler
6,10,15,20,30,40dB,698-2700MHz,N-Female, 200W
CO-Rxx-ON200C (xx=06, 10or 40, Preconfigured Coupling Value)
Technical Specifications
Electrical
Frequency Range
Input Average Power
Peak Power
Coupling Value
Coupling tolerance
Main Line Loss
Input port VSWR
Insertion Loss
PIM
Impedance
MHz
W
W
dB
dB
dB
CO-R06ON200C
CO-R10ON200C
6
1.2
1.7
10
1.2
0.8
< 1.4
CO-R15CO-R20ON200C
ON200C
698-2700
200 (Maximum)
1000
15
20
1.2
1.5
0.4
0.2
CO-R30ON200C
CO-R40ON200C
30
1.5
0.2
< 1.2
40
1.5
0.2
0.1
-140 @2x43dBm
50
dB
dBc
Mechanical
Dimension, LxWxH
Weight
Material
Inner Plating
Connector Type
Temperature Range
Humidity
Environmental Class
mm
(in)
kg
(lb)
209x63x25 (8.2x2.5x1.0)
93x63x25 (3.7x2.5x1.0)
0.4 (0.9)
0.2 (0.4)
Aluminum
Silver
N-Female
-35 to +65
< 95
Indoor/Outdoor IP65
C
%
25
63
Outline Drawing
25
209
63
25
3.2
25
93
158
Issued: June2010
Control: 3-0-2
1
Indoor Coupler
30,40,55dB,820-960/1700-1900MHz,7/16 Din-Female,200W
CO-Bxx-D200C, CO-Dxx-D200C(xx=06, 10or 40, Preconfigured
Coupling Value)
Features and Product Description
Technical Specifications
Electrical
Frequency Range
Input Power
Coupling Value
Insertion Loss
VSWR
3rd Order Intermodulation @ 2 43dBm Carrier
Impedance
MHz
W
dB
dB
band
D band
820 960
1700 1900
200
30 1.5, 40 1.5, 55 2.0
0.2
< 1.20 : 1
-140
50
dBc
Mechanical
Dimension (L x W x H)
Weight
Material
mm
kg
99.6 x 62.6 x 25
0.4
Aluminum
7/16 DIN
Type N-Female
-30 to +65
< 95
Indoor
Through ports
Couple port
Connector Type
Operational Temperature
Operational Humidity
Environmental Class
C
%
xx Coupling Value
30dB
40dB
55dB
159
Issued: Aug10
Control: 3-0-2
1/1
Technical Specifications
Electrical
Frequency Range
Input Average Power
Peak Power
Coupling Value
Coupling tolerance
Main Line Loss
Isolation
Input port VSWR
PIM
Impedance
MHz
W
W
dB
dB
dB
dB
DC-R05OD200M
DC-R06OD200M
5
0.8
2.3
> 25
6
0.8
1.7
> 26
dBc
DC-R07OD200M
698-2700
200 (Maximum)
1000
7
0.8
1.5
> 27
< 1.25
-140 @2x43dBm
50
DC-R08OD200M
DC-R10OD200M
8
0.8
1.2
> 28
10
1
0.8
> 30
Mechanical
Dimension, LxWxH
Weight
Material
Inner Plating
Connector Type
Temperature Range
Humidity
Environmental Class
mm
(in)
kg
(lb)
156x66x36 (6.1x2.6x1.4)
0.75 (1.7)
Aluminum
Silver
7-16 DIN-Female
-25 to +75
< 95
Indoor/Outdoor IP65
*13,15,20,30,40dB specs listed in next page
C
%
Outline Drawing
44
36
66
5.5
112
156
36
DC-R05-OD200M, DC-R06-OD200M,
DC-R07-OD200M, DC-R08-OD200M,
DC-R10-OD200M
160
Issued: Nov.2010
Control: 3-0-1
1/2
Technical Specifications
Electrical
Frequency Range
Input Average Power
Peak Power
Coupling Value
Coupling tolerance
Main Line Loss
Isolation
Input port VSWR
PIM
Impedance
MHz
W
W
dB
dB
dB
dB
DC-R13OD200M
DC-R15OD200M
13
1
0.5
> 33
15
1
0.4
> 35
dBc
DC-R20OD200M
698-2700
200 (Maximum)
1000
20
1
0.3
> 40
< 1.25
-140 @2x43dBm
50
DC-R30OD200M
DC-R40OD200M
30
1.2
0.2
> 33
40
1.5
0.2
> 43
Mechanical
mm
(in)
kg
(lb)
Dimension, LxWxH
Weight
Material
Inner Plating
Connector Type
Temperature Range
Humidity
Environmental Class
156x66x36 (6.1x2.6x1.4)
156x70x36 (6.1x2.8x1.4)
0.75 (1.7)
0.85 (1.9)
Aluminum
Silver
7-16 DIN-Female
-25 to +75
< 95
Indoor/Outdoor IP65
C
%
Outline Drawing
112
156
36
DC-R13-OD200M,
DC-R15-OD200M,
DC-R20-OD200M
48
40
66
44
36
112
156
70
5.
5
5.
36
DC-R30-OD200M,
DC-R40-OD200M
161
Issued: Nov.2010
Control: 3-0-1
2/2
Technical Specifications
Electrical
Frequency Range
Input Average Power
Peak Power
Coupling Value
Coupling tolerance
Main Line Loss
Isolation
Input port VSWR
PIM
Impedance
MHz
W
W
dB
dB
dB
dB
DC-R05ON200M
DC-R06ON200M
5
0.8
2.3
> 25
6
0.8
1.7
> 26
dBc
DC-R07ON200M
698-2700
200 (Maximum)
1000
7
0.8
1.5
> 27
< 1.25
-140 @2x43dBm
50
DC-R08ON200M
DC-R10ON200M
8
0.8
1.2
> 28
10
1
0.8
> 30
Mechanical
Dimension, LxWxH
Weight
Material
Inner Plating
Connector Type
Temperature Range
Humidity
Environmental Class
mm
(in)
kg
(lb)
141x55x23 (5.6x2.2x0.9)
0.30 (0.7)
Aluminum
Silver
N-Female
-25 to +75
< 95
Indoor/Outdoor IP65
*13,15,20,30,40dB specs listed in next page
C
%
Outline Drawing
115
15
37
55
5
4.
23
105
141
DC-R05-ON200M, DC-R06-ON200M,
DC-R07-ON200M, DC-R08-ON200M,
DC-R10-ON200M
162
Issued: Nov.2010
Control: 3-0-1
1/2
Technical Specifications
Electrical
Frequency Range
Input Average Power
Peak Power
Coupling Value
Coupling tolerance
Main Line Loss
Isolation
Input port VSWR
PIM
Impedance
MHz
W
W
dB
dB
dB
dB
DC-R13ON200M
DC-R15ON200M
13
1
0.5
> 33
15
1
0.4
> 35
dBc
DC-R20ON200M
698-2700
200 (Maximum)
1000
20
1
0.3
> 40
< 1.25
-140 @2x43dBm
50
DC-R30ON200M
DC-R40ON200M
30
1.2
0.2
> 33
40
1.5
0.2
> 43
Mechanical
mm
(in)
kg
(lb)
Dimension, LxWxH
Weight
Material
Inner Plating
Connector Type
Temperature Range
Humidity
Environmental Class
141x55x23 (5.6x2.2x0.9)
141x59x23 (5.6x2.3x0.9)
0.30 (0.7)
0.40 (0.9)
Aluminum
Silver
N-Female
-25 to +75
< 95
Indoor/Outdoor IP65
C
%
Outline Drawing
115
115
4.
105
15
15
37
55
41
59
5
4.
105
23
23
141
141
DC-R30-ON200M,
DC-R40-ON200M
DC-R13-ON200M,
DC-R15-ON200M,
DC-R20-ON200M
163
Issued: Nov.2010
Control: 3-0-1
2/2
Directional Coupler
DC-Nxx-D200M, DC-Nxx-N200M
Features and Product Description
Technical Specifications
Electrical
6dB
Frequency Range
Input Power
Dissipative Loss
Coupling Value
Main Line Loss
Directivity
VSWR
Impedance
MHz
W
dB
dB
dB
dB
10dB
15dB
20dB
800 2500
200
0.2
6
1.7
10
0.7
15
0.4
20
0.3
> 20
< 1.25 : 1
50
Mechanical
7/16 DIN-Female
Type N-Female
7/16 DIN-Female
Type N-Female
Dimension
(L x W x H)
Weight
Material
Operational Temperature
Operational Humidity
Environmental Class
155 x 65 x 36
141 x 55 x 22
0.75
0.3
Aluminum
-30 to +75
< 95
Indoor
mm
kg
o
C
%
Ordering Information
xx Coupling Value
6dB
10dB
15dB
20dB
164
Type N connector
DC-N06-N200M
DC-N10-N200M
DC-N15-N200M
DC-N20-N200M
Issued: 02Feb07
Control: 3-0-1
1/1
Technical Specifications
Electrical
Frequency Range
Input Power
Coupling Value
Main Line Loss
VSWR
3rd Order Intermodulation @ 2 43dBm Carrier
Impedance
6dB
MHz
W
dB
dB
10dB
15dB
800 2500
200
10
15
0.7
0.3
< 1.30 : 1
-140
50
6
1.6
dBc
20dB
20
0.3
Mechanical
Dimension ( L x W x H)
Weight
Material
Operational Temperature
Operational Humidity
Environmental Class
mm
kg
220 x 63 x 25
0.3
Aluminum
-35 to +75
< 95
Indoor
C
%
167 x 63 x 25
0.25
Outline Drawing
165
Issued: Aug10
Control: 3-0-2
1/1
POI-TDA2ODN4SG
Multi Operator Combiner - 1x iDEN, 1x EGSM, 2x GSM900, 3x GSM1800, 3x
UMTS2100
Features
Product Description
POI-TDA2ODN4SG is a multi-operator combiner that is designed for
cost effective antenna sharing solution. This high power combiner is
designed to combine 1x iDEN, 1x EGSM, 2x GSM900, 3x GSM1800 and
3x UMTS2100 for in-building common antenna system. It can be
deployed in places such as convention centers, exhibition halls,
airports, underground tunnels and other large buildings.
Comba is capable of providing solutions for any combination of
frequency bands while keeping insertion loss to a minimum
Technical Specifications
Electrical
Mechanical
- UMTS2100
RX/TX(C):
RX/TX(A):
RX/TX(B):
RX/TX(C):
880-890/925-935
890-900/935-945
900-915/945-960
1710-1715/1805-1810
& 1720-1740/1815-1835
1740-1760/1835-1855
& 1715-1720/1810-1815
1760-1785/1855-1880
1920-1935.1/2110.3-2125.1&
1974.9-1979.7/2164.9-2169.7
1935.1-1950.1/2125.1-2140.1
&1969.9-1974.9/2159.9-2164.9
1950.1-1969.9/2140.1-2159.9
< 6.0
Isolation [dB]
- GSM900/GSM900/EGSM
- GSM1800/GSM1800
- UMTS2100/ UMTS2100
- Cross band
> 33
> 33
> 33
> 91
> 20
> 14
600500300
49
2
10
2
-30 2
7/16 DIN-Female
0 to +50
< 95
Wall Mount
IP-65
Shipping Information
Dimensions, H x W x D [mm] *
Weight [kg]
850750500
70
< -153
Impedance [ohm]
50
100
150
166
POI-TDH2IDN1HK
Multi Operator Combiner - 4xGSM900,6xGSM1800,4xUMTS,3xLTE2.6G
Features
Product Description
The POI-TDH2IDN1HK is one of a range of compact, low intermodulation,
cellular combiners for cost effective, multi-band in-building combining
systems. This high power combiner is designed to combine GSM900,
GSM1800, WCDMA2100 and LTE2.6G to share the same system, while
providing >80dB isolation among GSM900, GSM1800, WCDMA2100 and
LTE2.6G system. Main applications for this product include: convention
centers, exhibition halls, airports, underground tunnels and other large
buildings.
With extensive range of passive components, Comba is capable of
providing solutions for almost any combination of frequency bands while
keeping insertion loss to a minimum.
Technical Specifications
Electrical
Electrical
- WCDMA,
- LTE2.6G
890-897.5/935-942.5
897.5-907.5/942.5-952.5
907.5-915/952.5-960
885-890/930-935
Mechanical
Dimension LxWxH [mm]
RX/TX(A):
RX/TX(B):
RX/TX(C):
RX/TX(D):
RX/TX(E):
RX/TX(F):
1720.1-1730.1/1815.1-1825.1
1730.1-1740.1/1825.1-1835.1
1740.1-1750.1/1835.1-1845.1
1750.1-1760.1/1845.1-1855.1
1760.1-1770.1/1855.1-1865.1
1770.1-1780.1/1865.1-1875.1
RX/TX(A):
RX/TX(B):
RX/TX(C):
RX/TX(D):
1920.3-1935.1/2110.3-2125.1
1935.1-1949.9/2125.1-2139.9
1950.1-1964.9/2140.1-2154.9
1964.9-1979.7/2154.9-2169.7
RX/TX(A):
RX/TX(B):
RX/TX(C):
150
50
600x400x800
88
2
17
7/16 Din-Female
7/16 Din-Female
0 to +60
Operating Humidity
<95
Mounting
Environmental Class
Floor Stand
Indoor
Shipping Information
2500-2515/2620-2635
2540-2555/2660-2675
2555-2570/2675-2690
(Wooden Crate)
Dimensions, H x W x D [mm]
Weight (approx.) [kg]
860x600x1060
115
6
> 40
> 80
> 18
<-155(REVERSE)
Issue : 3-1-1
15.08.2011
Page 1
167
POI-TSJ2IDN1HK-TX
Multi Operator Combiner - 6xGSM900 Tx, 6xGSM1800 Tx, 4xUMTS
Tx,3xLTE2.6G Tx/Rx
Features
Product Description
The POI-TSJ2IDN1HK-TX is one of a range of compact, low intermodulation,
cellular combiners for cost effective, multi-band in-building combining
systems. This high power combiner is designed to combine GSM900,
GSM1800, WCDMA2100 and LTE2.6G to share the same system, while
providing >80dB isolation among GSM900, GSM1800, WCDMA2100 and
LTE2.6G system. Main applications for this product include: convention
centers, exhibition halls, airports, underground tunnels and other large
buildings.
With extensive range of passive components, Comba is capable of providing
solutions for almost any combination of frequency bands while keeping
insertion loss to a minimum.
Technical Specifications
Electrical
Frequency Range [MHz]
- GSM900
TX1:
TX2:
TX3:
TX4:
- UMTS850
TX1:
- CDMA2000
TX1:
- PCS1800
TX1:
TX2:
TX3:
TX4:
TX5:
TX6:
- WCDMA2100
TX1:
TX2:
TX3:
TX4:
- LTE2.6G
TX1/RX1:
TX2/RX2:
TX3/RX3:
Electrical
Isolation [dB]
-In band
-Cross Band
Return Loss [dB]
> 40
> 80
> 18
935.0-942.5
942.5-952.5
952.5-960.0
930-935
877.5-882.5
870-877.5
1815.1-1825.1
1825.1-1835.1
1835.1-1845.1
1845.1-1855.1
1855.1-1865.1
1865.1-1875.1
2110.3-2125.1
2125.1-2139.9
2140.1-2154.9
2154.9-2169.7
2500-2515/2620-2635
2540-2555/2660-2675
2555-2570/2675-2690
150
50
Mechanical
Dimension LxWxH [mm]
Weight (approx.) [kg]
Number of Output Ports-Combined
Simplex
Number of Input Ports 2G&3G Simplex
LTE2.6G Duplex
Number of Monitors Ports 306dB
600x400x650
60
2TX
16TX
3TX/Rx
2TX
7/16 Din-Female
7/16 Din-Female
N-Female
-10 to +65
Operating Humidity
Mounting
<95
Floor Stand
Environmental Class
Indoor
Shipping Information
(Wooden Crate)
Dimensions, H x W x D [mm] TX/RX
Weight (approx.) [kg]
750x490x960
85
<-155(REVERSE)
Issue : May.2012
2-1-0
Page 1
168
POI-TSJ2IDN1HK-RX
Multi Operator Combiner - 6xGSM900 Rx, 6xGSM1800 Rx,4xUMTS Rx,
3xLTE2.6G Tx/RX
Features
Product Description
The POI-TSJ2IDN1HK-RX is one of a range of compact, low intermodulation,
cellular combiners for cost effective, multi-band in-building combining
systems. This high power combiner is designed to combine GSM900,
GSM1800, WCDMA2100 and LTE2.6G to share the same system, while
providing >80dB isolation among GSM900, GSM1800, WCDMA2100 and
LTE2.6G system. Main applications for this product include: convention
centers, exhibition halls, airports, underground tunnels and other large
buildings.
With extensive range of passive components, Comba is capable of providing
solutions for almost any combination of frequency bands while keeping
insertion loss to a minimum.
Technical Specifications
Electrical
Frequency Range [MHz]
- GSM900
RX1:
RX2:
RX3:
RX4:
- UMTS850
RX1:
- CDMA2000
RX1:
- GSM1800
RX1:
RX2:
RX3:
RX4:
RX5:
RX6:
- WCDMA2100
RX1:
RX2:
RX3:
RX4:
- LTE2.6G
TX1/RX1:
TX2/RX2:
TX3/RX3:
Electrical
Input Power Rating Per [W]
150
890.0-897.5
897.5-907.5
907.5-915.0
885-890
832.5-837.5
825.0-832.5
1720.1-1730.1
1730.1-1740.1
1740.1-1750.1
1750.1-1760.1
1760.1-1770.1
1770.1-1780.1
1920.3-1935.1
1935.1-1949.9
1950.1-1964.9
1964.9-1979.7
2500-2515/2620-2635
2540-2555/2660-2675
2555-2570/2675-2690
Impedance [ohm]
50
(Wooden Crate)
Isolation [dB]
-In band
-Cross Band
Return Loss [dB]
> 40
> 80
> 18
Mechanical
Dimension LxWxH [mm]
600x400x650
60
2RX
16RX
3TX/Rx
2RX
7/16 Din-Female
7/16 Din-Female
N-Female
-10 to +65
Operating Humidity
Mounting
<95
Floor Stand
Environmental Class
Indoor
Shipping Information
Dimensions, H x W x D [mm] TX/RX
Weight (approx.) [kg]
750x490x960
85
169
U Clamp
0 2 4
6
8
10 12
50 - 110
Lock Nut
Clamp
Clamp
Lock Nut
50 - 110
Mounting Bracket
U Clamp
Installation Preparation:
Date:
Packing List
Qty
Description
Antenna
Kit
of Parts
SJA-B-12R (00) 1 SJA-B-12R (xx)
Downtilt Mounting Bracket
0
1
Mounting Bracket
2
1
U Clamp
2
2
Clamp
2
2
Hex Bolt (M10 x 150)
4
4
Nut (M10)
8
8
Plain Washer (M10)
4
4
Hex Bolt (M8 x 25)
8
8
Nut (M8)
8
8
Plain Washer (M8)
8
8
Spring Washer (M8)
8
8
Mechanical Downtilt Range
Mounting Bracket
Downtilt Range
L (mm)
SJA-B-12R (00)
0
SJA-B-12R (08)
1900
0~8
SJA-B-12R (12)
1450
0~12
1088
SJA-B-12R (16)
0~16
SJA-B-12R (17)
1219
0~17
SJA-B-12R (28)
662
0~28
558
0~32
SJA-B-12R (32)
Antenna was inward tested, which complying with Comba Enterprise
Standard (Q/GZ JXTX 1-2004: QB440100).
Test Engineer:
Enhancing Communications
Corporate Headquarters
India Headquarters
China Headquarters
Europe Headquarters
CALA Headquarters
Gustavslundsvagen 147,
SE-167 51 Bromma,
Stockholm
Sweden
)RUORFDORIFHGHWDLOVSOHDVHYLVLWWKH&RPEDZHEVLWHRUFRQWDFWWKHUHJLRQDOKHDGTXDrWHUV
Website: www.comba-telecom.com
Email: comba@comba-telecom.com