Air Filters Are Important For Compress Air Products

You might also like

Download as docx or pdf
Download as docx or pdf
You are on page 1of 2

Air Filters are Important for Compressed Air 

Products
February 17, 2010 — Kirk Edwards

You may notice that EXAIR offers most of our products in a kit form. These kits always contain

a filter and pressure regulator with any other associated parts for a specific product. A filter is

always a good addition to an end use compressed air application to keep the application running clean

and effective.

A compressed air filter/separator is available with filter elements in different micron sizes to remove

smaller or larger particles depending on the end use product you are using. All of EXAIR filters have 5

micron elements to remove solid contaminants and water condensate prior to running through the end

use product.

It is first important to make sure the filter is sized properly for the peak flow demand of the

compressed air product. We make sure all of the filters in our kits are sized properly for peak demand

of the individual product. If multiple products are ordered and only one filter is desired for multiple

end use products, make sure to consult an Application Engineer for the right size filter.

Filters also generally come with a clear polycarbonate bowl or a metal bowl to hold the condensate

and/or contaminants. Polycarbonate bowls can be damaged by some lubricants and chemicals

therefore should have a metal bowl guard to protect people. Metal bowls provide much greater

protection for applications of higher temperature, pressure and where chemicals may be present. If

you are uncertain of the environmental conditions, a metal bowl is the best bet.

Keeping the filter bowls drained is important. EXAIR’s filters are automatic drain, which have a float

mechanism to open a drain valve and release the liquid and contaminants. This keeps the filters low

maintenance.

Since the filter elements trap contaminants, they will need to be changed as part of a regular

maintenance program. Keeping the elements clean minimizes pressure drops in the compressed air

system which keeps your end use application working properly. EXAIR also supplies replacement

elements for all of our filters so we may assist in keeping your system running optimally.

©Copyright 2010 EXAIR Corporation


11510 Goldcoast Drive
Cincinnati, OH 45249
TecHelp@EXAIR.com

You might also like