Professional Documents
Culture Documents
CTD-1X DS ENG 270907-v
CTD-1X DS ENG 270907-v
CTD-1X DS ENG 270907-v
Input Specifications
Operating frequency 45 to 65 Hz Optional accessories Extended fixing kit CDT-kit:
Max. system voltage 0.72 kV Four cable/bus-bar
fixing screws.
Rated insulation level 3 kV/1 min. @ 50 Hz Four plastic caps for
Insulation class E (max 75°C) cable/bus-bar fixing screws.
Short-time current rating Two panel mounting
Ith Typical 100 In /1 s fixing clips.
Idyn 2.5 Ith Special features 1 A secondary current,
The short-time thermal Tropicalization
current Ith is anyway limited Working temperature -25°C to +60°C (-13°F to
by the cable/bus-bar size 140°F) (R.H. < 90% non
Extended current rating 120% condensing @ 40°C)
Security factor (FS) ≤ 5 (Class: 0.5, 1 and 3) Storage temperature -30°C to +70°C (-22°F to
158°F) (R.H. < 90% non
condensing @ 40°C)
Connection Screw type
General Specifications Cable cross section area From 1.5 to 6 mm2
Min/Max screws tightening
torque From 1.2 to 3 Nm
Standards According to EN60044-1
Protection degree IP00
Housing ABS, self-extinguishing: IP20 (with sealable terminal
UL 94 V-0 block covers + wire terminals)
Mounting DIN-rail bus-bar Cable diameter Max. 23 mm
and panel mounting
Bus-bar size Max. 20x5 mm
Standard accessories Two terminal block screws.
Two sealable terminal block Weight From 150 to 200 g
covers.
Two panel mounting Output Specifications
fixing clips.
One DIn rail adapter. Rated secondary current 5 A or 1 A
Range Table
Model CTD-1X from 40A to 100A Model CTD-1X from 120A to 300A
Primary Cur- Primary Cur-
Burden (VA) Burden (VA)
rent rent
A CL 0.5 CL 1 CL 3 A CL 0.5 CL 1 CL 3
40 1 120 1.75 2 2.5
50 1 1.25 125 2 2.25 2.75
60 1.25 1.5 150 2.25 2.5 3
70 1.5 1.75 160 2.5 2.75 3.25
75 1 1.25 1.75 200 3 3.25 3.75
80 1.25 1.5 2 250 4.5 4.75 5.25
100 1.5 1.75 2.25 300 6 6.25 6.75
Benefits
1 2 3 4 5
6 7 8 9 10
Wiring Diagram
27
S1 S2
22
44 69,2
L 46
P1 P2
N
2 Specifications are subject to change without notice CTD-1X DS ENG 270907