Professional Documents
Culture Documents
Traduction 42
Traduction 42
PAUSE TIME
MIN:SEC 00:10
1)RELEASE TIME
2)PULSE 3)PAUSE
In case an ordinary feed release unit (UDL200) is connected, pulse/pause times cannot be used and must
therefore be cancelled. Press 2 and the following menu will appear:
PULSE TIME
MIN:SEC -- --:-- --
Press 9 and --:-- will appear in the display. Pulse and pause times are now cancelled.
1)SYSTEM 1
2)SYSTEM 2
Use the same procedure for definition of all system parameters for system 2 .
7.12 Filling
42
When all data are saved in the setup menu, press until the following menu appears:
1)FILL. 2)OUTPUT
3)ACTIVE 4)SETUP
The required filling times must now be entered in a filling menu that will vary if “separate” or “same systems” is
selected in the setup menu. Press 1 for filling.