Professional Documents
Culture Documents
CID53 Firmware Into CID52 Phone
CID53 Firmware Into CID52 Phone
In this tutorial we will be flashing a DB2020 CID52 with CID53 RED Firmware (Cross CID
Flashing).
Firstly we need to use either SETool2 Lite 1.11 or jdflasher, I’ll be using jdf.
If your not familiar with jdflasher please look Flashing with jdflasher, and take a look at the
other guides in the tutorial section.
YOU MUST ALREADY have quick access patch applied to your phone to DB2020 Cross CID
flash before you carry on.
Before we can flash our CID53 Firmware in to our CID52 phone we must convert into .raw
format using a program like GExtract, main2raw etc... (personally I prefer GExtract).
Generate a Quick Access patch for the FW we’re flashing with and keep it handy for after we
flash our Main FW, if you don’t apply this after flashing the Main Firmware file and you plan on
patching your phone it means you have to flash back to a CID52 Firmware so you can apply QA
patch.
So now we have our CID53 Firmware in .raw format and a QA Patch (generate in mbn format),
we need to flash it.
Using your mouse, drag the Firmware file (.raw) over to the flash window of Far Manager then
press “copy”.