Professional Documents
Culture Documents
Katert
Katert
kettle
○
○
○
○
○
Please read and keep these instructions
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
new kettle...
○
○
○
○
○
first boiling
○
To clean away any deposits that are left in the kettle after the manufacturing
○
○
process
○
○
Safety first
○
○
scalding water
○
○
○
If your kettle is a fast boil model, it may sound louder during boiling and
○
www.morphyrichards.co.uk
Important safety • Extreme caution must be used when
moving a kettle containing hot water.
instructions
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
• Do not touch hot surfaces, use handles
or knobs.
• Always close the lid securely, other
The use of any electrical appliance wise the kettle may not switch off
requires the following of basic common automatically and may spit out boiling
sense safety rules. water.
Primarily there is danger of injury or • Avoid contact with steam from the
death and secondly the danger of spout when the water is boiling or just
damage to the appliance. These are after it has switched off.
indicated in the text by the following two • Take care if opening the lid for re-filling
conventions: when the kettle is hot. Do not fill above
WARNING: Danger to the person! the MAX mark, otherwise boiling water
IMPORTANT: Damage to the may be ejected.
appliance! In addition we offer the • Do not hold the switch in the on
following safety advice. position or tamper with the switch to fix
it in the on position as this may cause
Location
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
steam to be ejected and could damage
the switch-off mechanism.
• Always locate your kettle away from • Unplug from the electrical outlet when
the edge of the worktop. cleaning.
• Ensure that the kettle is used on a • Allow to cool before putting on or
firm, flat surface. taking off parts and before cleaning.
• Do not locate the base unit on a metal
tray or metal surface. Children
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Mains lead
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
• Never allow a child to operate this
appliance.
• The mains lead should reach from the • Children are vulnerable in the kitchen
socket to the base unit without particularly when unsupervised and if
straining the connections. appliances are being used or cooking
• Do not let the mains lead hang over is being carried out.
the edge of the worktop where a child • Teach children to be aware of dangers
could reach it. in the kitchen, warn them of the
• Do not let the lead run across an open dangers of reaching up to areas
space e.g. between a low socket and where they cannot see properly
table. or should not be reaching.
• Do not let the lead run across a cooker
or toaster or other hot area which Treating scalds
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
2
cord, plugs or kettle in water or other
liquid.
Features
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Electrical requirements
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
3
Using
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Filter removal
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
1 Lift up the lid and fill the kettle. 1 Open the lid.
The integrated water level gauge/ 2 Lift the filter upwards from its location
viewing lid (on certain models) allows using the tab provided.
you to easily see the amount of water 3 To refit the filter, slot into the side wall
in your kettle. guides and press down firmly. Ensure
• Always put enough water to cover the the filter is correctly located into the
bottom of the kettle, minimum 1 cup central guide.
200cc.
• Boil only as much water as you need Cool Steel kettle
as this saves electricity. 1 Open and support the lid.
2 Place the kettle on the base unit, 2 Pull the filter downwards from its
ensuring the kettle locates on to the location.
360o connector. 3 To refit the filter locate the filter into
• The 360o connector allows the kettle the grooves and click into place.
to be located at any position - ideal for
left and right handed users and Note: Which way you have removed
convenient positioning on your the filter and replace the same way
worktop. after cleaning.
3 Plug in and switch on at the wall
socket. Warning : Unless the filter is fitted
4 Switch the kettle on. The ‘power on’ correctly, the kettle lid may not
indicator neon will light up. close and lock securely.
5 When lifting the kettle from the base
unit by the handle ensure you hold
the kettle level.
Cleaning the filter
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
4
Descaling
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
5 Wipe the outside of the kettle
thoroughly with a damp cloth to
remove all traces of acid which may
IMPORTANT: As this kettle is fitted damage the finish.
with a concealed element it must be IMPORTANT: Ensure that the
descaled as and when appropriate. This electrical connections are completely
depends on usage and the hardness of dry before using the kettle.
the water in your area. 6 Never operate the kettle with the citric
Scale can cause the kettle to acid crystals in the water.
malfunction and may damage the
element invalidating the warranty.
It is essential that regular descaling Cleaning
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
takes place.
Remove hard scale using either a WARNING: Always disconnect the
proprietary descaling product suitable for plug from the mains and allow the kettle
plastic kettles (following the instructions to cool down before cleaning.
carefully), or citric acid crystals. Wipe the outside of the kettle with a
We recommend using citric acid damp cloth.
crystals (available from most pharmacies) IMPORTANT: Do not use abrasive
as follows, cleaners on the outside of the kettle which
1 Fill the kettle to the 1 litre mark, boil, may scratch the surface.
then unplug the kettle (remove the
cordless kettle from the base unit) and
stand it in an empty sink or bowl. Helpline
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
5
Your two year To qualify for the 2 year guarantee the appliance
must have been used according to the manu-
guarantee
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
facturers instructions. For example kettles
should have been regularly descaled.
440/8053/13 Rev 1