Professional Documents
Culture Documents
D D D D: SN54165, SN54LS165A, SN74165, SN74LS165A Parallel-Load 8-Bit Shift Registers
D D D D: SN54165, SN54LS165A, SN74165, SN74LS165A Parallel-Load 8-Bit Shift Registers
CLK INH
at the shift/load (SH/LD) input. These registers
SH/LD
CLK
VCC
also feature gated clock (CLK) inputs and
NC
complementary outputs from the eighth bit. All
inputs are diode-clamped to minimize 3 2 1 20 19
transmission-line effects, thereby simplifying E 4 18 D
system design. F 5 17 C
NC 6 16 NC
Clocking is accomplished through a two-input
G 7 15 B
positive-NOR gate, permitting one input to be
H 8 14 A
used as a clock-inhibit function. Holding either of 9 10 11 12 13
the clock inputs high inhibits clocking, and holding
QH
QH
NC
SER
GND
either clock input low with SH/LD high enables the
other clock input. Clock inhibit (CLK INH) should
be changed to the high level only while CLK is NC – No internal connection
high. Parallel loading is inhibited as long as SH/LD
is high. Data at the parallel inputs are loaded
directly into the register while SH/LD is low,
independently of the levels of CLK, CLK INH, or
serial (SER) inputs.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date. Copyright 2002, Texas Instruments Incorporated
Products conform to specifications per the terms of Texas Instruments On products compliant to MIL-PRF-38535, all parameters are tested
standard warranty. Production processing does not necessarily include unless otherwise noted. On all other products, production
testing of all parameters. processing does not necessarily include testing of all parameters.
ORDERING INFORMATION
ORDERABLE TOP-SIDE
TA PACKAGE†
PART NUMBER MARKING
PDIP – N Tube SN74LS165AN SN74LS165AN
Tube SN74LS165AD
0°C to 70°C SOIC – D LS165A
Tape and reel SN74LS165ADR
SOP – NS Tape and reel SN74LS165ANSR 74LS165A
Tube SN54LS165AJ SN54LS165AJ
CDIP – J
Tube SNJ54LS165AJ SNJ54LS165AJ
–55°C
55°C to 125°C
CFP – W Tube SNJ54LS165AW SNJ54LS165AW
LCCC – FK Tube SNJ54LS165AFK SNJ54LS165AFK
† Package drawings, standard packing quantities, thermal data, symbolization, and PCB design
guidelines are available at www.ti.com/sc/package.
FUNCTION TABLE
INTERNAL
INPUTS
OUTPUTS OUTPUT
PARALLEL QH
SH/LD CLK INH CLK SER QA QB
A...H
L X X X a...h a b h
H L L X X QA0 QB0 QH0
H L ↑ H X H QAn QGn
H L ↑ L X L QAn QGn
H H X X X QA0 QB0 QH0
100 Ω NOM
Req
Input
Output
’LS165A
Input Input
Output
15
CLK INH
2
CLK 9
S S S S S S S S QH
C1 QA C1 QB C1 QC C1 QD C1 QE C1 QF C1 QG C1 7
10
SER 1D 1D 1D 1D 1D 1D 1D 1D QH
R R R R R R R R
CLK
CLK INH
SER L
SH/LD
A H
B L
C H
D L
Data
Inputs
E H
F L
G H
H H
Output QH H H L H L H L H
Output QH L L H L H L H L
absolute maximum ratings over operating free-air temperature (unless otherwise noted)†
Supply voltage, VCC (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 V
Input voltage, VI: SN54165, SN74165 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.5 V
SN54LS165A, SN74LS165A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 V
Interemitter voltage (see Note 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.5 V
Package thermal impedance θJA (see Note 3): D package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73°C/W
N package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67°C/W
NS package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64°C/W
Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –65°C to 150°C
† Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTES: 1. Voltage values, except interemitter voltage, are with respect to network ground terminal.
2. This is the voltage between two emitters of a multiple-emitter transistor. This rating applies for the ’165 to the SH/LD input in
conjunction with the CLK INH input.
3. The package thermal impedance is calculated in accordance with JESD 51-7.
3V
High-Level Timing
Pulse 1.5 V 1.5 V Input 1.5 V
0V
tw th
tsu
3V
Low-Level Data
1.5 V 1.5 V 1.5 V 1.5 V
Pulse Input
0V
VOLTAGE WAVEFORMS VOLTAGE WAVEFORMS
PULSE DURATIONS SETUP AND HOLD TIMES
Output 3V
Control
(low-level 1.5 V 1.5 V
3V
Input 1.5 V 1.5 V enabling) 0V
0V tPZL tPLZ
tPLH tPHL
Waveform 1 ≈1.5 V
In-Phase VOH (see Notes C 1.5 V
Output 1.5 V 1.5 V and D) VOL + 0.5 V
(see Note D) VOL
VOL
tPZH tPHZ
tPHL tPLH
VOH
Out-of-Phase VOH Waveform 2 VOH – 0.5 V
(see Notes C 1.5 V
Output 1.5 V 1.5 V ≈1.5 V
(see Note D) and D)
VOL
VOLTAGE WAVEFORMS VOLTAGE WAVEFORMS
PROPAGATION DELAY TIMES ENABLE AND DISABLE TIMES, 3-STATE OUTPUTS
3V
High-Level Timing
Pulse 1.3 V 1.3 V Input 1.3 V
0V
tw th
tsu
3V
Low-Level Data
1.3 V 1.3 V 1.3 V 1.3 V
Pulse Input
0V
VOLTAGE WAVEFORMS VOLTAGE WAVEFORMS
PULSE DURATIONS SETUP AND HOLD TIMES
Output 3V
Control
(low-level 1.3 V 1.3 V
3V
Input enabling)
1.3 V 1.3 V 0V
0V tPZL tPLZ
tPLH tPHL
In-Phase
Waveform 1 ≈1.5 V
VOH (see Notes C 1.3 V
Output 1.3 V 1.3 V VOL + 0.5 V
and D)
(see Note D) VOL VOL
tPZH tPHZ
tPHL tPLH
VOH
Out-of-Phase Waveform 2 VOH – 0.5 V
VOH
(see Notes C 1.3 V
Output 1.3 V 1.3 V
and D) ≈1.5 V
(see Note D) VOL
VOLTAGE WAVEFORMS VOLTAGE WAVEFORMS
PROPAGATION DELAY TIMES ENABLE AND DISABLE TIMES, 3-STATE OUTPUTS
NOTES: A. CL includes probe and jig capacitance.
B. All diodes are 1N3064 or equivalent.
C. Waveform 1 is for an output with internal conditions such that the output is low except when disabled by the output control.
Waveform 2 is for an output with internal conditions such that the output is high except when disabled by the output control.
D. S1 and S2 are closed for tPLH, tPHL, tPHZ, and tPLZ; S1 is open and S2 is closed for tPZH; S1 is closed and S2 is open for tPZL.
E. Phase relationships between inputs and outputs have been chosen arbitrarily for these examples.
F. All input pulses are supplied by generators having the following characteristics: PRR ≤ 1 MHz, ZO ≈ 50 Ω, tr ≤ 1.5 ns, tf ≤ 2.6 ns.
G. The outputs are measured one at a time with one input transition per measurement.
PACKAGING INFORMATION
Orderable Device Status (1) Package Package Pins Package Eco Plan (2) Lead/Ball Finish MSL Peak Temp (3)
Type Drawing Qty
5962-7700601VEA ACTIVE CDIP J 16 1 TBD Call TI Level-NC-NC-NC
5962-7700601VFA ACTIVE CFP W 16 1 TBD Call TI Level-NC-NC-NC
7700601EA ACTIVE CDIP J 16 1 TBD Call TI Level-NC-NC-NC
7700601FA ACTIVE CFP W 16 1 TBD Call TI Level-NC-NC-NC
JM38510/30608B2A ACTIVE LCCC FK 20 1 TBD Call TI Level-NC-NC-NC
JM38510/30608BEA ACTIVE CDIP J 16 1 TBD Call TI Level-NC-NC-NC
JM38510/30608BFA ACTIVE CFP W 16 1 TBD Call TI Level-NC-NC-NC
SN54LS165AJ ACTIVE CDIP J 16 1 TBD Call TI Level-NC-NC-NC
SN74165N OBSOLETE PDIP N 16 TBD Call TI Call TI
SN74LS165AD ACTIVE SOIC D 16 40 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
SN74LS165ADE4 ACTIVE SOIC D 16 40 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
SN74LS165ADR ACTIVE SOIC D 16 2500 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
SN74LS165ADRE4 ACTIVE SOIC D 16 2500 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
SN74LS165AJ OBSOLETE CDIP J 16 TBD Call TI Call TI
SN74LS165AN ACTIVE PDIP N 16 25 Pb-Free CU NIPDAU Level-NC-NC-NC
(RoHS)
SN74LS165AN3 OBSOLETE PDIP N 16 TBD Call TI Call TI
SN74LS165ANSR ACTIVE SO NS 16 2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
SN74LS165ANSRG4 ACTIVE SO NS 16 2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
SNJ54LS165AFK ACTIVE LCCC FK 20 1 TBD Call TI Level-NC-NC-NC
SNJ54LS165AJ ACTIVE CDIP J 16 1 TBD Call TI Level-NC-NC-NC
SNJ54LS165AW ACTIVE CFP W 16 1 TBD Call TI Level-NC-NC-NC
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in
a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS) or Green (RoHS & no Sb/Br) - please check
http://www.ti.com/productcontent for the latest availability information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements
for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered
at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame
retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material)
(3)
MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder
temperature.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is
Addendum-Page 1
PACKAGE OPTION ADDENDUM
www.ti.com 26-Sep-2005
provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the
accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take
reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on
incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited
information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI
to Customer on an annual basis.
Addendum-Page 2
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications,
enhancements, improvements, and other changes to its products and services at any time and to discontinue
any product or service without notice. Customers should obtain the latest relevant information before placing
orders and should verify that such information is current and complete. All products are sold subject to TI’s terms
and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in
accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI
deems necessary to support this warranty. Except where mandated by government requirements, testing of all
parameters of each product is not necessarily performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for
their products and applications using TI components. To minimize the risks associated with customer products
and applications, customers should provide adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right,
copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process
in which TI products or services are used. Information published by TI regarding third-party products or services
does not constitute a license from TI to use such products or services or a warranty or endorsement thereof.
Use of such information may require a license from a third party under the patents or other intellectual property
of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of information in TI data books or data sheets is permissible only if reproduction is without
alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction
of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for
such altered documentation.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that
product or service voids all express and any implied warranties for the associated TI product or service and
is an unfair and deceptive business practice. TI is not responsible or liable for any such statements.
Following are URLs where you can obtain information on other Texas Instruments products and application
solutions:
Products Applications
Amplifiers amplifier.ti.com Audio www.ti.com/audio
Data Converters dataconverter.ti.com Automotive www.ti.com/automotive
DSP dsp.ti.com Broadband www.ti.com/broadband
Interface interface.ti.com Digital Control www.ti.com/digitalcontrol
Logic logic.ti.com Military www.ti.com/military
Power Mgmt power.ti.com Optical Networking www.ti.com/opticalnetwork
Microcontrollers microcontroller.ti.com Security www.ti.com/security
Telephony www.ti.com/telephony
Video & Imaging www.ti.com/video
Wireless www.ti.com/wireless