Professional Documents
Culture Documents
Configuring Linksys & Dlink With Westell 6100
Configuring Linksys & Dlink With Westell 6100
Click on Disconnect
Bridge mode Setup
Click on Configuration
Type in modem secure username and
Password (Remember: It is usually different from VOL username and password)
Click on VC Configurations
Click on first Edit button
Select Bridge mode here
Click on Set VC
Click on DHCP Configurations
Click on OK.
Power-Cycle the modem
Now Modem is set to bridge mode. Connect the
router
Configuring Lynksys.
Type 192.168.1.1
Wan IP
To Configure Wireless.
Click on Wireless. Select ‘BASIC WIRELESS SETTINGS’.
Type SSID . Select NETWORK MODE. Click ‘save settings’.
Wan IP address