Mr. Sanket .V. Chavan Mr. Madhur Bihani Project Guide : Prof. M. B. Mali Sponsored by: Actel Group. PIR SENSORS
The PIR (Passive Infra-Red) Sensor is a pyroelectric
device that detects motion by measuring changes in the infrared levels emitted by surrounding objects. This motion can be detected by checking for a high signal on a single I/O pin. PIR SENSORS Theory of Operation: Pyroelectric devices, such as the PIR sensor, have elements made of a crystalline material that generates an electric charge when exposed to infrared radiation. The changes in the amount of infrared striking the element change the voltages generated, which are measured by an on- board amplifier. The device contains a special filter called a Fresnel lens, which focuses the infrared signals onto the element. As the ambient infrared signals change rapidly, the on-board amplifier trips the output to indicate motion. PARALLAX 28027 PASSIVE INFRARED SENSOR
• Single Bit output
Clock output HOME LAMP INTENSITY CONTROL ELECTRONIC LOCK SYSTEM • Solution achieved by use of FINITE STATE MACHINE. [FSM] • Key defined by the programmer in terms of constants. • Code consists of 2:5 Encoder, MUX and Decoder. Work Scheduling • Time and trigger to FPGA can be customized by the user and are shown on the LCD of the system. • Microcontroller used is AT89C51. • It has 4Kb of Flash,128 bytes of RAM, two 16 bit counters,5 Vector two level interrupt architecture and power saving modes. FLOWCHART FOR WORK SCHEDULING WATER LEVEL INDICATOR CIRCUIT RTL SCHEMATIC WATER LEVEL INDICATOR Simulation of Water level indicator HUMIDITY SENSOR SY HS-220 Motor Control and Sprinkler Controller Simulation of motor control PWM FOR FAN SPEED CONTROL Power Control Simulation in Multism