Professional Documents
Culture Documents
Here Are Some Different Kinds of Orgone Matrix Material: Wizzers Desk
Here Are Some Different Kinds of Orgone Matrix Material: Wizzers Desk
Wizzers Desk Personal Bioenergy Tools - Orgone Matrix Material Ergonite Orgonite Organite - Construction info & sales-
Radionics Stations -Mobius Coils - EM Pollution Control - DIY Plans & More! - Site Map / Products / Info / Ebooks / Contact /
Legal / Links / Orgonite / Radionics
Basic HD Ergonite
Ingredient Amount
in parts Process Comments
Steel - Small 1
Secondary metal -
Fine
.1 - .25
(copper or pyrite
or bronze Mix all dry ingredients together thoroughly. Add catalyzed resin a bit at a A good basic recipe for
suggested) time until until there is enough resin to just cover the surface of the particles. use in either heavy-duty
Resin .75 - 1.15 The mixture should have the consistency of thick oatmeal, and have just TBs and HHGs, or in
enough resin that all the particles are covered. Allow it to sit for a few minute. actively stimulated
Catalyst orgone generators.
If there is more than 1/8" (2mm) of resin covering the surface of the
particles, add more steel until the mixture is an even thick slurry like Different primary and
(if using copper +50% secondary ingredients
or paramagnetic oatmeal. Pour into molds. Stir constantly, including while pouring.
can be used as desired. .
earth )
Secondary .1 - .25
Mineral - Fine
Secondary .1 - .25
Organic - Small
Primary Metal - 1 The particles must be fine enough to suspend in the resin. One way to
Fine deal with it if this is not the case is to catalyze the resin, wait until it
Secondary gels, and quickly mix in the other ingredients. Another is to use a A useful recipe for making
1 thickening agent. In some cases, the thickening agent and the
Metal - Fine orgone generators designed to
Resin 3-4 secondary organic can be the same. be driven by outside power
Secondary 1.3 sources like zappers, magnetic
Organic - Fine Premix all dry ingredients thoroughly, and the add the dry ingredients pulsers, radionics machines and
Quartz Powder - .4 to the catalyzed resin, stirring continually. Add the dry ingredients a bit so forth. Also useful in making
Fine at a time. You should get a creamy thick liquid that pours slowly into small orgonite devices to be
Secondary the molds and still is liquid enough to smooth itself off at the surface. carried in a pocket and handled
.3 a lot.
Mineral - Fine If the particles are settling out, there is too much resin. Usually, resin
Catalyst if to dry ingredients should be about 1 to 1, sometimes a little more or
+ 30% - 50% less depending on the absorbency of the secondary organic.
using copper
Wood Sprite
Ingredient Amount
in parts Process Comments
Pitch Resin 2.5 - 3
Chalcopyrite or Melt the pitch slowly over a heat source with no open flame. The
.5 fumes from melting pitch may be flammable. Don't burn
Pyrite - Small A lot of work, but well worth it.
Aluminum - Large 1.5 yourself, wear gloves. Once the pitch is melted, Premix all the Strong connection to the earth, have
Steel - Small 1 dry ingredients except for the citrine. Add the dry ingredients to gotten many obvious reactions from
Paramagnetic the pitch and stir well. Then add the citrine. Spoon carefully into animals when gifting this kind of
Earth - Small or .5 molds and allow to cool. You generally have a few minutes only orgonite to natural energy centers.
Large before the mixture sets up once removed from the heat. Also a nice kind to have indoors if
Dried Crumbled protected form hot sun. Mixture will
Sage or .3 - .5 Charge with either sunlight or a charged water bath (or both) melt if exposed to high heat.
Chaparral - Small while cooling.
Citrine - Fine .01
Chocolate Shine
Ingredient Amount
in parts Process Comments
Steel - Small or 1
Large Mix all the fine ingredients together. Mix catalyst
Brass or into resin and add fine ingredients. If the steel Cosmetically appealing and highly EM responsive HD
.3 particles are large, then place them in the mold
Copper - Fine or MHD orgonite. Good for TBS and HHGS as well as
Paramagnetic and pour the resin mixture over them stirring as generators. Has a warm feel to the energy. Especially
.3 you pour. If the steel particles are small, add
earth - Fine suited for work on Geopathic lines, ley lines, Curry /
Citrine Powder them to the resin mixture and stir constantly as Hartman lines etc. Provided the paramagnetic earth of
.05 you pour the mixture into the molds.
- Fine is sufficient quality, this general recipe has been
Quartz Powder proven to reduce EMF by conventional testing.
.1
- Fine Charge with 15Hz and / or Schumann
Resin 1.25 - 1.3 frequencies while curing.
Catalyst +100%
Water Baby
Ingredient Amount Process Comments
in parts
At least 1
Turquoise - Large chunk per
unit.