The document summarizes the turn on sequence for a 50PK250 television. It begins in standby mode with the primary side of the power supply at 155V. When the relay is turned on, the primary side increases to 375V. The power supply then provides 5V and 17V regulated power to turn on the microprocessor and main board, bringing the television into run mode. Key voltages and components involved in the start up process are listed.
The document summarizes the turn on sequence for a 50PK250 television. It begins in standby mode with the primary side of the power supply at 155V. When the relay is turned on, the primary side increases to 375V. The power supply then provides 5V and 17V regulated power to turn on the microprocessor and main board, bringing the television into run mode. Key voltages and components involved in the start up process are listed.
The document summarizes the turn on sequence for a 50PK250 television. It begins in standby mode with the primary side of the power supply at 155V. When the relay is turned on, the primary side increases to 375V. The power supply then provides 5V and 17V regulated power to turn on the microprocessor and main board, bringing the television into run mode. Key voltages and components involved in the start up process are listed.
In Run (Relay On) Primary side is 375V 7 M5V F801 POWER SUPPLY Reg Stand-By 1V AC In Run 376V (SMPS) 9 +5V Vs 1 Stand Reg By 5V Reg Regulator Vs STBY RUN 17V 3.48V 5.15V Reg 8 Va Va 5 9 7 9 Reg 8
AC Stand By Error Det. 5V 17V
Det. 5V Va Vs Vs M5V 8 9 7 9 CONTROL 6 2 6 6 6 RL On M_On Y-SUS Z-SUS 7 M5V Not Va 5VFG 18V 18V / M5V 3.3V Used 5 7 17.16V 3.28V 8 8 7 7 7 7 5V Run: STBY_5V (5.22V) Stand-By: STBY_5V (3.46V)
4.94V 4.92V 2.44V 17V 18V / M5V
Error Det. Audio At point 3 Floating IC801 TV is in Gnd AC Det. Stand-By Y DRIVE Upper 5.17V state. It is 8 If missing, set will not Energy Star Y DRIVE Lower turn on. +5V HDMI Compliant. 7 EDID Tuner Less than 1 7 3.3V And other 3.3V Watt 8 Va Va circuits Via X PWB X PWB X PWB IC305 3.3VST 5 MAIN Left Center Right 3.3V Reg 8 8 IC302 2 Error Relay M5V On Board 3.3V_ST Det. On 7 Reset 3 2 C108/D1 Microprocessor Power On Front IR IC1 Soft Touch 4 4 Board Key Pad Remote Power Key Power Key October 2010 50PK250 Plasma