Professional Documents
Culture Documents
Steps For Testing Evdo
Steps For Testing Evdo
TESTING :-
5. Now when you click on this icon this interface will be opened up automatically:
6. Now connect your GPS and Phone set/Data Card with your laptop through
connecting wires provided to you.
7. Then right click in open space in Explorer window and click on detect all
automatically if you are not sure about the port of your GPS and Phone connected
to your system. Otherwise if you are sure about the com port ,just right click on
that com port and click on the device to detect which is connected to that port. So
now you have detected all the devices.
8. Now click on Live Testing option as below:
9. Now to go into Logging Click on this icon:
10. Now this window will be opened up:
Select EVDO Test Full->Apply->OK. Then it will ask where to save the file. Select
the destination folder and click on save Button.
11. Now go to Start ->Connect to->EVDO->Give user name And password
->Connect
12. Now open Flash Get on your laptop screen :
And click on Tool->Site Explorer the link will be opened up as below:
Now give the ftp IP address in address. Enter the login and password of ftp server and
then press enter. Your link will be done with server. Then Select the file to be
downloaded. Right click on that file and click on download.
13. Now click on the DO View on main menu of your CNT1 and select the
windows DO DRC Rate, Rx RLP throughput, DO Message ,Pilot Set Graph, DO,
Best C/I ,Ec/Io,SINR ,User count Windows. And monitor them.
14. After the drive test is done Click on stop option to stop the Live testing
and Close the CNT1 window. Now your *.APT has been made .You can open
them in CNA1 to analyze your testing.