The Job Safety Analysis outlines the key hazards and control measures for different activities involved in cast-in-place reinforced concrete works, including rebar installation, survey and marking, form work, concrete pouring, curing, and painting. It identifies potential hand injuries, falling, crushing, chemical contamination, and eye irritation issues, and recommends proper protective equipment like gloves, safety shoes, face shields, respirators, and good access/housekeeping as appropriate control measures for each activity.
The Job Safety Analysis outlines the key hazards and control measures for different activities involved in cast-in-place reinforced concrete works, including rebar installation, survey and marking, form work, concrete pouring, curing, and painting. It identifies potential hand injuries, falling, crushing, chemical contamination, and eye irritation issues, and recommends proper protective equipment like gloves, safety shoes, face shields, respirators, and good access/housekeeping as appropriate control measures for each activity.
Copyright:
Attribution Non-Commercial (BY-NC)
Available Formats
Download as DOCX, PDF, TXT or read online from Scribd
The Job Safety Analysis outlines the key hazards and control measures for different activities involved in cast-in-place reinforced concrete works, including rebar installation, survey and marking, form work, concrete pouring, curing, and painting. It identifies potential hand injuries, falling, crushing, chemical contamination, and eye irritation issues, and recommends proper protective equipment like gloves, safety shoes, face shields, respirators, and good access/housekeeping as appropriate control measures for each activity.
Copyright:
Attribution Non-Commercial (BY-NC)
Available Formats
Download as DOCX, PDF, TXT or read online from Scribd
2 The Job Safety Analysis (JSA) for Cast-in-place reinforced concrete works are as follows.
Sl.no Activity Hazard/Risk Identified Control Measures
Hand injury and cutting from sharp Wear proper hand
1.0 Rebar installation edges. gloves and steel toe safety shoes. Falling hazard,Protruding reinforcing Maintaining safe steel. distance from the 2.0 Survey and Marking protruding reinforcing steel. Pinch point crush, hammering. Wear suitable PPE and 3.0 Form work use proper tools. Chemical contamination, hitting of Wear chemical personals by concrete discharge protection PPE, face hose. shield, and use rubber shoes, firmely secured 4.0 Concrete pouring the pressure hose with tag lines and maintain safe distance from the pump/hose. Falling and slipping. Use proper access and 5.0 Curing good house keeping. Chemical and fumes and eye Use face mask, irritation. chemical respirator if 6.0 Painting required. Wash eyes with cool running water.