This document provides a drawing for an E-170 loudspeaker enclosure. The enclosure is made of 25mm thick cherry plywood and 30mm thick Chinese quince laminated lumber for the front baffle. It houses a Pioneer TAD 1601a driver and was designed by Yuichi Arai, as detailed in a 1990 issue of MJ Magazine in Tokyo.
This document provides a drawing for an E-170 loudspeaker enclosure. The enclosure is made of 25mm thick cherry plywood and 30mm thick Chinese quince laminated lumber for the front baffle. It houses a Pioneer TAD 1601a driver and was designed by Yuichi Arai, as detailed in a 1990 issue of MJ Magazine in Tokyo.
This document provides a drawing for an E-170 loudspeaker enclosure. The enclosure is made of 25mm thick cherry plywood and 30mm thick Chinese quince laminated lumber for the front baffle. It houses a Pioneer TAD 1601a driver and was designed by Yuichi Arai, as detailed in a 1990 issue of MJ Magazine in Tokyo.
This document provides a drawing for an E-170 loudspeaker enclosure. The enclosure is made of 25mm thick cherry plywood and 30mm thick Chinese quince laminated lumber for the front baffle. It houses a Pioneer TAD 1601a driver and was designed by Yuichi Arai, as detailed in a 1990 issue of MJ Magazine in Tokyo.
Wood Materials : A Cherry plywood (thickness=25mm) and a Chinese quince laminated lumber (thickness=30mm) only for front baffle Driver : Pioneer TAD 1601a Designed by Yuichi Arai (Refer to the December 1990 issue of MJ Magazine, Tokyo for details.)