Download as pdf
Download as pdf
You are on page 1of 1
$R3100 Antenna Replacement Instructions 1. Open the case. Gently push a smal lthead screwdriver into each of F the two openings onthe right side of the case as shown inthe picture wi ‘Avoid inserting the screwerver into the holes onthe lft side of the case as the receiver could be damaged. 2. Remove the antenna. Lift up on the antenna close to where it connects tothe circuit board 3. Connect the new antenna. Align the antenna with the connector on the circuit board ‘Apply alight pressure tothe top ofthe antenna connector and it wll pop into place. DO NOT FORCE THE ANTENNA, 4, Swivel the antenna back and forth. I connected correctly, the antenna will suivel freely. If it doesn, the antenna is not connected correctly. 5. Find the small round cutouts in the case. Make sure that when you replace the case that the antenna fits into the round slots. IF YOU DO NOT ALIGN THE SLOTS, THE ANTENNA WILL BE DAMAGED. 6. Snap the case back together. It should easily snap back together: tit doesn't, check to rake sure that you have everything aligned correctly (©2008 orn hoy, te. peru asa ecesare we dane xl Haman Hon he. £105 lle Rnd Capa. 6822 Cae, 47750233 wn sy aus coco egg peas Toma eos t,o oh har DSM un UME a vader routed tara ian Hoy espe

You might also like