Professional Documents
Culture Documents
Presentation
Presentation
?
|
UPS PROGRAMMING
Use ST7STICK-EPB/EU
BR1000-UPS PROGRAMMER SETTING
Connectivity Sequence
Connect Power supply to Programming Kit
Connect Parallel cable from CPU to kit
Connect Battery
Connect Programming Cable with correct Pin on board
(Look for Pin No.1)
Switch ON Brain by pressing ON Button once.
After Programming remove battery connector
Remove Programming Cable
Remove Power Supply from Programming Kit and then
remove Parallel Cable
USB PROGRAMMING
Use ST7MDTU3-EPB/EU
BR1000-USB PROGRAMMER SETTING
Connectivity Sequence
Connect Power supply to Programming Kit
Connect Parallel cable from CPU to kit
Connect Battery
Connect USB Cable
Connect Programming Cable with correct Pin on board
(Look for Pin No.1)
Switch ON Brain by pressing ON Button once.
After Programming remove battery connector
Remove USB Cable
Remove Programming Cable
Remove Power Supply from Programming Kit and then
remove Parallel Cable
Message during programming
Select yes
Verify Checksum