This document provides instructions for aligning a Brown & Sharp CMM using 3 datum planes and a datum line. It instructs the user to create 3 datum planes from 4 points each, set the planes as Datums A and B, create a datum line from 2 points on Datum B, relate the line to Datums A and B, set the line as the new origin, and then turn off the relationship.
This document provides instructions for aligning a Brown & Sharp CMM using 3 datum planes and a datum line. It instructs the user to create 3 datum planes from 4 points each, set the planes as Datums A and B, create a datum line from 2 points on Datum B, relate the line to Datums A and B, set the line as the new origin, and then turn off the relationship.
This document provides instructions for aligning a Brown & Sharp CMM using 3 datum planes and a datum line. It instructs the user to create 3 datum planes from 4 points each, set the planes as Datums A and B, create a datum line from 2 points on Datum B, relate the line to Datums A and B, set the line as the new origin, and then turn off the relationship.
This document provides instructions for aligning a Brown & Sharp CMM using 3 datum planes and a datum line. It instructs the user to create 3 datum planes from 4 points each, set the planes as Datums A and B, create a datum line from 2 points on Datum B, relate the line to Datums A and B, set the line as the new origin, and then turn off the relationship.
2. Set plane as Datum – A – 3. Create a plane for Datum – B – 4 points 4. Set plane as Datum – B – 5. Create a line on Datum – C – 2 points 6. Select relationship to relate line to planes B and A. 7. Select Datum – C – to set new origin 8. Turn Off Relationship