Professional Documents
Culture Documents
Installing Exchange Server 2007 On A Windows 2008 Server
Installing Exchange Server 2007 On A Windows 2008 Server
Installing Exchange Server 2007 On A Windows 2008 Server
Note:
At this time, neither Windows Server 2008 nor Exchange Server 2007 SP1 have released
to manufacturing. As I am therefore working with beta code, certain elements of what
follows (in particular the screenshots, may change before the final version.
Introduction
It is nearly a year after the release of Exchange 2007 and many of us now have complete
Exchange 2007 implementations. I guess that means we are looking for something new to
do! If this is the case then you won’t be disappointed, as very soon we will be presented
with the new challenge of moving our existing Exchange 2007 systems onto Windows
Server 2008.
Table 1 lists the various supported scenarios for Exchange and OS versions.
The first thing to note is that Exchange 2007 RTM is not supported on Windows Server
2008. To install Exchange 2007 on Server 2008 you must run Exchange 2007 SP1. This
service pack, as many of you may know, is a little different from previous service packs
in that it is a complete installation of Exchange. Effectively SP1 is RTM with the SP1
code slipstreamed into it. Having established that Exchange 2007 SP1 is required to
install on Server 2008, what other considerations are there?
Probably the biggest consideration is Active Directory. Table 2 sets out the different
Domain Controller versions supported by different versions of Exchange.
One new Active Directory feature of Windows Server 2008 which I haven’t mentioned is
Read Only Domain Controllers (RODC) (and Global Catalog servers). These are servers
which do not hold a writable copy of the AD and also do not hold account passwords.
They are most likely to be used in branch office scenarios to prevent security breaches
either intentional or accidental. So how do these RODCs affect Exchange? Simply put,
Exchange doesn’t use them! When left to automatically associate with a domain
controller (or global catalog server) Exchange will ignore the RODC or ROGC. The
important thing for administrators to remember is not to manually set Exchange to work
with a RODC as things simply will not work correctly.
One other area that will be welcome to administrators is that with the release of Exchange
2007 SP1, the Exchange Management Console will finally be supported on Windows
Vista, and for that matter on Server 2008 as well.
Before moving on to how we upgrade, I think it is worth clarifying that Exchange 2007
SP1 will not install on Windows Server 2008 Server Core. Server Core, for those who
haven’t heard, is a cut down version of Windows Server 2008 which only presents a
command line interface. It has been stripped down to run various server roles including
amongst others Domain Controller, DHCP, DNS, File and Print. However, because a lot
of functionality has been stripped out to ensure a small footprint and less need for
patching, important components such as the .Net Framework are not present to support
Exchange.
Note:
As I mentioned we are currently working with beta code. It is because of this that the
Unified Messaging role does not currently install on Server 2008. This will be rectified
before release.
Even when you have a clustered mailbox server, you cannot perform a rolling upgrade by
upgrading one node of the cluster failing over and then doing the other node.
The only way is to perform a migration! In other words you must do a clean install of
Windows Server 2008 on a new server and then migrate your data. Mailboxes can be
moved using the Move-Mailbox cmdlet and public folder data must be replicated.
This has caused a fair amount of discontent on various online forums but it is the only
way!
Installation
Having looked at all the background, let’s get started with the installation. The first thing
to cover is preparing your Windows Server 2008 machine for Exchange 2007. There are a
bunch of prerequisites which must be met as listed below:
For a much more detailed look at the requirements for each Exchange server role
see Exchange 2007 System Requirements.
For now we are going to install an Exchange 2007 SP1 server in a new domain and new
organisation. We will install the CAS, HT and Mailbox roles. In order to install the
prerequisites we will run the following commands one after the other at a command
prompt:
ServerManagerCmd -i RSAT-ADDS
ServerManagerCmd -i PowerShell
ServerManagerCmd -i Web-Server
ServerManagerCmd -i Web-ISAPI-Ext
ServerManagerCmd -i Web-Metabase
ServerManagerCmd -i Web-Lgcy-Mgmt-Console
ServerManagerCmd -i Web-Basic-Auth
ServerManagerCmd -i Web-Digest-Auth
ServerManagerCmd -i Web-Windows-Auth
ServerManagerCmd -i Web-Dyn-Compression
After the first command (RSAT-ADDS) you will need to reboot as shown in Figure 1.
Figure 1: Installing Active Directory Management Tools and being prompted to reboot
After the reboot, I used a simple batch file to run the other commands in sequence. Part
of the output from the commands is shown in Figure 2.
Figure 2: Part of the output from the prerequisite installation
For more detailed information about the Windows Server 2008 roles/features required for
the other Exchange 2007 roles (Edge Transport Server and Unified Messaging Server)
see How to Install Exchange 2007 SP1 Prerequisites on Windows Server 2008.
Having successfully completed the installation of prerequisites, it is time to install
Exchange. Start setup and click “Install Microsoft Exchange Server 2007 SP1” as shown
in Figure 3.
Next run through the usual setup steps as shown in Figures 4 – 11.
Figure 4: The SP1 Setup introduction screen
Figure 7: Selecting a typical install which installs CAS, HT, Mailbox roles and the
management tools
Figure 8: Setting the new Exchange Organisation name
Having completed the steps in Figures 3-11 installation begins. However, it is at this
point that an error occurs as shown in Figure 12. It would appear that for whatever
reason, the registry key “HKLM\SOFTWARE\Microsoft\Windows\Windows Error
Reporting\Consent” does not exist!
Figure 12: The registry key doesn’t exist error message
Note:
It is highly unlikely that this problem will still exist once the products ship.
To rectify this problem locate the relevant area in the registry and create the required key
as shown in Figure 13.
Having resolved the problem with the registry key you are left with no other option than
to exit setup. On doing this you will be prompted to reboot, which you should do.
When the server is backed up, restart setup which will start in Exchange Maintenance
Mode as shown in Figure 14.
At this point, step through the remaining setup screens as shown in Figures 15-17.
Before completing this article I thought it might be interesting to show the registry key
that we created earlier. As can be seen in Figure 19, it is now populated with various
values.
Figure 19: The values in the registry key created to solve the installation error
Summary
As you can see from the steps above, the install process to put Exchange 2007 on
Windows Server 2008 is basically very simple. At this time there is the odd glitch but
there is no doubt these will be ironed out before Release to Manufacturing. I feel the only
thing that has the potential to cause a delay in deployment are the usual worries about
deploying a brand new OS and the fact that if you already have Exchange 2007 on Server
2003 you will have to perform a migration which requires extra hardware