Professional Documents
Culture Documents
Smart Charge Ii Manual - Industrial Leak Detection Division: 861-018 Rev. E 30
Smart Charge Ii Manual - Industrial Leak Detection Division: 861-018 Rev. E 30
LOW N2/AIR CHARGE FAULT: If, during the N2 STABILIZATION TIMER, the pressure falls 50
PSI from the AIR/NITROGEN CHARGE LEVEL setpoint, a LOW
N2/AIR CHARGE FAULT is displayed.
N2/AIR CHARGE FAULT: If the time to reach the AIR/NITROGEN CHARGE LEVEL setpoint
exceeds the NITROGEN CHARGE WATCHDOG TIME, the part is
rejected and an N2/AIR CHARGE FAULT is displayed.
He RECOVERY FAULT: If the part pressure remains above the He RECOVERY LEVEL value
in excess of the RECOVERY WATCHDOG time, the part is rejected
and a He RECOVERY FAULT is displayed.
861-018 Rev. E 30