Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

WIRING DIAGRAM FOR SPLITABLE ALUMITONE

TM

Directions: Tie white & green wires together (Ground) and solder to volume pot.
Take orange wires (hot) and connect to switch where noted.

250K pots recommended for better tone.


.022mfd cap recommended

FOR FOLLOWING PICKUPS


LACE ALUMITONE SPLITABLE HUMBUCKER

NORMAL WIRING

Normal Mode - ORANGE is HOT WHITE - NO CONNECTION


WHITE w/ BLACK STRIPE to GROUND
GREEN to GROUND
WHITE - No Connection. WHITE w/ BLACK STRIPE to GROUND

GREEN to GROUND

ORANGE (+) to SWITCH

SPLIT WIRING

WHITE

Split Mode changes the GROUND


from WHITE w/BLACK STRIPE to
GROUND, to WHITE to GROUND WHITE w/ BLACK STRIPE
MINI-TOGGLE
SWITCH
ORANGE (+) to SWITCH

GREEN to GROUND

COPYRIGHT ACTODYNE GENERAL 2003

You might also like