The document provides pinout diagrams for the OBDII diagnostic port for Volkswagen, BMW, and Mercedes vehicles. It lists the pin number, signal name, and description for each pin. Common pins include power (BATT+), ground (GND), and the two CAN bus lines (CAN_H and CAN_L) that are used for vehicle diagnostics communication. The pinouts differ between manufacturers in the specific signals and modules assigned to each pin for diagnostic access.
The document provides pinout diagrams for the OBDII diagnostic port for Volkswagen, BMW, and Mercedes vehicles. It lists the pin number, signal name, and description for each pin. Common pins include power (BATT+), ground (GND), and the two CAN bus lines (CAN_H and CAN_L) that are used for vehicle diagnostics communication. The pinouts differ between manufacturers in the specific signals and modules assigned to each pin for diagnostic access.
The document provides pinout diagrams for the OBDII diagnostic port for Volkswagen, BMW, and Mercedes vehicles. It lists the pin number, signal name, and description for each pin. Common pins include power (BATT+), ground (GND), and the two CAN bus lines (CAN_H and CAN_L) that are used for vehicle diagnostics communication. The pinouts differ between manufacturers in the specific signals and modules assigned to each pin for diagnostic access.
The document provides pinout diagrams for the OBDII diagnostic port for Volkswagen, BMW, and Mercedes vehicles. It lists the pin number, signal name, and description for each pin. Common pins include power (BATT+), ground (GND), and the two CAN bus lines (CAN_H and CAN_L) that are used for vehicle diagnostics communication. The pinouts differ between manufacturers in the specific signals and modules assigned to each pin for diagnostic access.
1 T5 Terminal 5 2 J1850 Bus + Not Used / reserved for other standards 3 N/A Not Used 4 CGND Chassis Ground (Terminal 31) 5 SGND Signal Ground (Terminal 31) 6 CAN_H Diagnosis CAN High 7 K-LNE ISO 9141-2 and ISO/DIS 14240-4 Communication Line. 8 N/A Not Used 9 N/A Not Used 10 J1850 Bus - Not Used / reserved for other standards 11 N/A Not Used 12 N/A Not Used 13 N/A Not Used 14 CAN_L Diagnosis CAN Low nd 15 L-LINE ISO 9141-2 and ISO/DIS 14230-4 2 communication line 16 BATT + +12v Battery Power (terminal 30) OBDII Pinout BMW.
Pin Signal Description
1 ERS Engine Rotation Speed (TD) 2 OBDII-Diag OBDII Diagnostic 7 O&I Reset Oil service and Inspection Reset 11 ESTO External Starter Turn On 14 BATT + +12v Battery Power 15 L-LINE ISO 9141-2 L-line (RXD Diagnostic Data Link) 16 Ign +12v +12v Ignition power 17 K-LINE ISO 9141-2 K-line (n/c?) 18 PGSP Programming Line 19 GND - Ground Line 20 K-LINE ISO 9141-2 (TXD Diagnostic Data Link) OBDII Pinout Mercedes (models after 2000).
Pin Signal Description
1 K-LINE Ignition control (EZS), air-conditioner(KLA), PTS, Safety systems (Airbag, SRS, AB) 3 TNA TD Engine rotation speed 4 GND - Ground Line 5 GND - Ground Line 6 CAN_H CAN High (including airbag system in: W203, W209, W220, W240, R230) 7 K-LINE Engine Control Diagnostics (ME/MSM/CDI) 8 IGN +12v Ignition power 9 K-LINE ABS, ASR, ESP, ETS, BAS diagnostics 11 K-LINE Gearbox and other transmission components (EGS, ETC, FTC) diagnistics 12 K-LINE All Activity module (AAM), Radio (RD), ICS, etc 13 K-LINE AB Diagnostics (safety systems) 14 CAN_L CAN Low diagnostics data link 15 K-LINE IC, KI, TAU, LWR Diagnostics 16 BATT + +12v Battery power