Professional Documents
Culture Documents
Procedure
Procedure
Procedure
1. The length of the tangent, length of arc and chain point tangent was calculated
from the given data before the site work starts.
2. The picket was placed on working site as a remark for theodolite placement.
3. Then the theodolite was set up and the bubble was centered.
4. After that, a tree was chosen as a reference object with a 0° angle.
5. The theodolite was tilt to the calculated bearing. Measuring tape was used to
determine the distance to place the arrows.
6. Step 5 was repeated until the end of site work.
Data and Calculation
= 22°
R=150m
I=2200m
C=5m
Tb=R tan /2
Lb=R
T=I - Tb
U=T+Lb
iii. T=2200-29.16
=2170.84m
iv. U=2170.84+57.60
=2228.44m
Attachment