Professional Documents
Culture Documents
Click Control Panel in The All Programs Menu.: Microsoft Loopback Adaptor Setup Guide
Click Control Panel in The All Programs Menu.: Microsoft Loopback Adaptor Setup Guide
Click Control Panel in The All Programs Menu.: Microsoft Loopback Adaptor Setup Guide
5. Scroll down the installed hardware list. Select "Add a new hardware device".
6. Select "Install the hardware that I manually select from a list". Click "Next".
9. Click "Next".
10. Click "Finish". The Adaptor is installed.
15. Select "Use the following IP adress". Fill the IP address as 10.10.10.1. Fill the Subnet
mask as 255.255.255.0. Click "OK".
16. Click "Close".