YOKOGAWA @
PM208 Adaptive Autopilot
PT500A Series
IM 8802-19
IM 80802-19E3. OPERATION
31 Operation
tion
Md Prep:
Prior to start-up, do the following:
(1) Check that the steering gear is ready for operation,
(2) Check that control & power box power supply is on. Check also that the test mode
‘switch of the control de power box is set to norn
3) Check that the annunciator unit's no. 1 and no.
(4) Check that the st
inspection has been completed, the switch can be operated from the control stand.
(5) Set the mode switch to the "HAND " position.
(6) Set the steering handle to the midship position,
(71) Set the system switch to FU-1 (NO.1 SYSTEM) or FU-2 (NO.2 SYSTEM).
‘When the switch is
"WR ON ] indicator lamps are lit
ring repeater compass gives a correct heading. After a prelimi
4, the caution alarm, the data display of the auto st
indicate the following, and the buzzer will sound.
[PROGRAM START
SOFTWARE VAR. x __|-x.. denotes the program version
f the annunciator unit. Then press the [ALARM]
3s tothe normal indication, making it possible (
+ Stop button Q
he display
automatic pilot. In the normal display
illustrated below
SPD AUTO
HEADING
(8) Selection between the two follow-up function sy
the vessel speed and heading are indica
vvossol speed (indicated only whon connected)