Professional Documents
Culture Documents
Exp No.03
Exp No.03
OBJECTIVE: The objective of this experiment is to measure the resonant frequency of peizo
electric buzzer.
PROCEDURE: 1. Do the experimental setup as shown in fig.3 Connect radar trainer system to
computer with USB to USB cable provided.
2. Connect 12V supply from adapter to Peizo Electric Buzzer.
3. Hold Peizo electric buzzer in front of transceiver antenna of radar trainer
system as shown in fig. 3 and Switch on the adapter.
4. Observe reflected signal due to the oscillation of buzzer in time domain
display of the software or at Amplified Radar Signal port.
5. Measure the frequency of oscillation of Peizo Electric Buzzer using spectrum
of Rf beam software. Spectrum shows fundamental frequency of oscillation
of buzzer and its harmonics in frequency domain with its magnitude.
RESULT :