Professional Documents
Culture Documents
Training BERT SDH Analyzer ANT5 Instrument
Training BERT SDH Analyzer ANT5 Instrument
Acterna ANT-5
SDH/PDH Access Tester
© 2005 JDS Uniphase Corporation.
2
All rights reserved. Company & Confidential
ANT-5 – The Fully Integrated Field Tester
SDH
PDH
ATM
SONET
No restriction !
It is:-
• A very compact field test solution
• An easy to use SDH/SONET/ATM handheld tester
It has:-
• PDH, SDH, SONET from 1.5M to 2.5G in one instrument
• All Interfaces built-in – which means NO adapters
• Optimized test philosophy to reduce user costs
• Superb off-line viewer for easy report generation
• An ATM Option that supports ATM on all rates
• Upgrade paths from electrical only to STM-1/-4/-16 optical
ANT-5
ANT-5 can
can test
test all
all interfaces
interfaces in
in the
the network:-
network:-
Installation,
Installation,Commissioning
CommissioningMaintenance,
Maintenance,Fault
FaultFinding
Finding
© 2005 JDS Uniphase Corporation.
5
All rights reserved. Company & Confidential
ANT-5 Key Benefits
Verify Connectivity
$ Quick BER test at fiber interface
$ Verify optical power level at Rx side
STM-1/4/-16 o
STM-1/4/16o
RNC
NB
Utopia interface
loop on VPI/VCI
Test: - ATM BERT (HCOR, HUNC, CLR, CMR,CER)
- Delay (CTD, CDV)
- ATM throughput,
- right VPI/VCI configuration
© 2005 JDS Uniphase Corporation.
12
All rights reserved. Company & Confidential
FY06 Activities
# Signal Structure
# Application
# OH Setup
# Measurement Timer
Start with RX
– Select Test type (Terminated, In-line monitor, Thru-mode1) )
– Select Interface
– Select Timing (internal, external)
– Select AU mapping
– Select Container
– Select PDH Setup (Rate, Tributary, Mode)
– Select Test Pattern
Copy Rx -> TX
PDH interfaces
– T1 (bantam)
– E1 interface unbalanced (BNC)
E1 interface balanced (RJ-48)
– DS3, E3, E4
interface unbalanced (BNC)
# Performance Analysis
# Repetitive BERT
# APS
# OH Capture
# Delay
# Tributary Scan
1 mS resolution
User programmable limits
Pass/Fail Indication
Results can be
printed/exported
# TSE errors
# PDH / SDH Defects
# SDH anomalies
Hex-format or Descriptor
according to Ring / Linear structure
© 2005 JDS Uniphase Corporation.
27
All rights reserved. Company & Confidential
ACTION Pointer Generation
START
/
STOP
OH Analysis
Pointer Analysis
Performance Analysis
APS result
TCM Analysis
Trigger :
- manual
- compare
- not compare
Results
Configurations
Application:
generating automatic test procedure for manufacturing, lab or
NE-evaluation processes
Using SCPI command over the serial interface
ATM carried over PDH / SDH / SONET over all interface rates
ATM cell generation ( 2 PVCs, UNI and NNI mode)
ATM load: CBR, VBR ( bandwith, burst length, burst gap)
ATM cells: O.191 test cells, ATM BERT (AAL-0), background
Alarm & Error insertion (HEC, VP-AIS, VP-RDI, VC-AIS, VC-RDI)
ATM QoS measurements (CER, CLR, CTD, CDV)
ATM Statistics (Utilization, cell counts, HEC error ratio)
ATM Channel Explorer (detects automatically active VCI, VPI)
© 2005 JDS Uniphase Corporation.
44
All rights reserved. Company & Confidential
OPTION ATM