Professional Documents
Culture Documents
Mounting Position & Shaft Position
Mounting Position & Shaft Position
Óê Óê
Óï Óï
Óî Óî
Óë Óë
Óì Óì
Îòò
Óí Óí
Óê
Óê Óï
Óî
Óî
Óï
Óë
Óë Óì
Óì
Úòò
Óí Óí
Óê
Óï
Óï Óê
Óî Óî
Óë Óë
Óì
Õòò
Óì Íòò
Éòò Óí
Óí
03203AXX
Figure 8: Depiction of mounting positions M1 ... M6
The following Observe the following notes for all gear units and gearmotors from SEW-EURODRIVE. 4
applies to all gear
units and
gearmotors
7
Direction of rota- If the drive has a backstop RS, you have to indicate the direction of rotation of the output
tion of the output for the drive. The following definition applies: 8
with a backstop
Clockwise (CW) = Rotating clockwise
As viewed at the output shaft:
Counterclockwise (CCW)= Rotating counterclockwise 9
10
ê
11
12
Þ
13
ÝÉ 14
ÝÝÉ ß
ÝÉ ÝÝÉ
15
60511AXX
Figure 9: Output direction of rotation 16
In right-angle gear units, you also have to indicate whether the direction of rotation is
given looking onto the A or B end. 17
Position of the out- In right-angle gear units, you also have to indicate the position of the output shaft and 18
put shaft and out- the output flange:
put flange A or B or AB 19
20
Þ 21
ß 22
60513AXX
Figure 10: Position of the output shaft and the output flange