Professional Documents
Culture Documents
Outback System
Outback System
grid
solar panel
Buy current (when in AC use)
Sell current outlet1
(disabled)
“inverter
inverter output pdu outlet2
current”
…
Charge
outletn
controller battery
bank “inverter output
voltage”
“charging current”
“battery voltage”
Inverter’s State Transition
Charging current
battery voltage > 26v for an hour
Battery voltage
Drop AC;
Use AC Invert from
Battery
Inverter state
(IS)
• the battery’s voltage ranges between 24v and 29v Charger State (CS)
• Charging current and battery voltage (both DC) should be read from the Outback System via
the GreenMonitor utility tool
• Inverter output current and voltage (both AC) should be read from the PDU that’s attached
to it, not the Outback System directly. The reason is the GreenMonitor’s reading of inverter
output current has an 1 amp resolution, and the PDU can provide readings on a per outlet
basis
• All the state stats regarding the Charge Controller and Inverter, including IS, IACM and CS
should be read from the GreenMonitor utility tool