Professional Documents
Culture Documents
Quemar CD para Upgrade DVD
Quemar CD para Upgrade DVD
4. On the tab Label at ISO 9660 you should write PIONEER with capital letters.
5. On the tab Burn you check Write, Finalize CD.
6. Write speed 4x
7. Write method: Disc-at-once
8. Click on New and the following window will open, see picture.
9. Find the *.bin file you should burn on the CD. Drag it over to the burn window. make sure the lable of the CD is PIONEER.
10. Bin file name shall be in CAPITAL letters that includes also the BIN.
11. Now you can start burning.
12. When its finished, take the CD to your DVD-player.
13. Turn on the player, and open the disc tray.
14. Put the Software Update Disc on the tray, and close the tray.
15. A screen will be displayed inviting you to push the "play" button to start the update.
16. The player will load the data, and the tray will open again. It is safe to remove the Software Update Disc from the tray now. Leave the tray open
17. Wait until the update process finishes and the Pioneer logo is shown on the screen. The update process will complete in less than 5 minutes.
18. The DVD-player is now updated with your new firmware.
19. The player is set back to Fresh out of the box.
Attention: DO NOT unplug the power cable or turn off the player during the update process. Do not touch the player at all until you see the Pioneer
logo again