The document provides channel assignments for controlling different components of an RC helicopter. Channel 1 controls ailerons, Channel 2 controls the elevator, Channel 3 controls the throttle and receiver power, and Channel 4 controls the rudder and main gyro. The cable colors running to the receiver from top to bottom are orange, red, and brown or alternatively white, red, and black. Channel 6 controls pitch for the front starboard cyclic.
The document provides channel assignments for controlling different components of an RC helicopter. Channel 1 controls ailerons, Channel 2 controls the elevator, Channel 3 controls the throttle and receiver power, and Channel 4 controls the rudder and main gyro. The cable colors running to the receiver from top to bottom are orange, red, and brown or alternatively white, red, and black. Channel 6 controls pitch for the front starboard cyclic.
The document provides channel assignments for controlling different components of an RC helicopter. Channel 1 controls ailerons, Channel 2 controls the elevator, Channel 3 controls the throttle and receiver power, and Channel 4 controls the rudder and main gyro. The cable colors running to the receiver from top to bottom are orange, red, and brown or alternatively white, red, and black. Channel 6 controls pitch for the front starboard cyclic.
Cable colors, from top down 1 - Aileron = Front port cyclic - Orange 2 - Elevator = Aft cyclic - Red - Brown 3 - Throttle = ESC (and receiver power) or 4 - Rudder = Gyro (main - 3 wire) - White 5 - Gyro sensitivity (1 wire) - Red - Black 6 - Pitch = Front starbord cyclic