Professional Documents
Culture Documents
D-Series: Benefits
D-Series: Benefits
D-Series: Benefits
D-Series
Gigabit Ethernet Workgroup L2 Switch with Optional Policy Support
In order to sustain a secure, feature-rich and cost-effective network well into the future, the D2 There is nothing more important
comes with a lifetime warranty. than our customers.
Features
Security Convergence
• Business-oriented, policy-based security* by user, application, • LLDP-MED (Media Endpoint Discovery): a standard extension of
protocol, port, or VLAN LLDP that stores values for parameters such as QoS and VLAN to
automatically configure and provision network devices such as IP
• Multiple user authentication methods via IEEE 802.1X, Web portal,* phones
and/or MAC address
• IP multicast snooping (data-driven IGMP): automatically prevents
• Full support, via optional policy license, for port-based policies* flooding of IP multicast traffic
(PC+Phone)
Performance
High Availability
• Aggregate capacity: D2 performs at wire speed per port and provides
switching capacity up to 17.86 Mpps throughput and 24 Gbps • IEEE 802.1s Multiple Spanning Tree Protocol: provides high link
bandwidth availability in multiple VLAN environments by allowing multiple
spanning trees; encompasses IEEE 802.1D Spanning Tree Protocol
• Address table size: up to 16,000 addresses are supported and IEEE 802.1w Rapid Spanning Tree Protocol
• IEEE 802.3ad Link Aggregation Control Protocol (LACP): support up
• Hardware queues: 8 hardware queues per port are supported
to 6 trunks, each with up to 8 ports per trunk
Page 2
Standards and Protocols
Switching Services Security RFC 3415 – View-based Access Control Model
for SNMP
IEEE 802.1AB – LLDP ARP Spoof Protection
RFC 3584 – SNMP Community MIB
ANSI/TIA-1057 – LLDP-MED DHCP Spoof Protection
RFC 3621 – Power over Ethernet MIB
IEEE 802.1D – MAC Bridges Dynamic and Static MAC Locking
IEEE 802.1AB - LLDP EAP Pass Thru Management
ANSI/TIA -1057 – LLDP-MED IEEE 802.1X Port Authentication Alias Port Naming
IEEE 802.1s – Multiple Spanning Trees MAC-based Port Authentication Command Line Interface
IEEE 802.1t – 802.1D Maintenance RADIUS Accounting for MAC Authentication Configuration Upload/Download
IEEE 802.1w – Rapid Spanning Tree RADIUS Client Editable Configuration File
Reconvergence RFC 3580 – IEEE 802.1X RADIUS Usage TFTP client
IEEE 802.3 – Ethernet Guidelines
Multi-configuration File Support
IEEE 802.3ab – GE over Twisted Pair Multi-user Authentication per Gigabit port
NMS Automated Security Manager
IEEE 802.3ad – Link Aggregation Password Protection (encryption)
NMS Console
IEEE 802.3af – PoE Secure Networks Policy License
NMS Inventory Manager
IEEE 802.3i – 10Base-T Secured Shell (SSHv2)
NMS Policy Manager
IEEE 802.3u – 100Base-T, 100Base-FX Secured Socket Layer (SSL)
Node/Alias Table
IEEE 802.3z – GE over Fiber User and IP Phone Authentication
RFC 768 – UDP
Full/half duplex auto-sense support on all ports Web-based Port Authentication
RFC 783 – TFTP
IGMP Snooping v1/v2/v3
RFC and MIB Support RFC 791 – IP
IP Helper Address
Enterasys Entity MIB RFC 792 – ICMP
Jumbo Frame support (9,216 bytes)
Enterasys Policy MIB RFC 793 – TCP
Loop Protection
Enterasys VLAN Authorization MIB RFC 826 – ARP
One-to-One and Many-to-One Port Mirroring
ANSI/TIA-1057 – LLDP-MED MIB RFC 854 – Telnet
Port Description
IEEE 802.1AB – LLDP MIB RFC 951 – BootP
Protected Ports
IEEE 802.1X MIB – Port Access RFC 1157 – SNMP
Per-port Broadcast/Multicast/Unknown Unicast
IEEE 802.3ad MIB – LAG MIB RFC 1901 – Community-based SNMPv2
Suppression
RFC 826 – ARP and ARP Redirect RFC 2271 – SNMP Framework MIB
Spanning Tree Backup Root
RFC 951, RFC 1542 – DHCP/BOOTP Relay RFC 3164 – The BSD Syslog Protocol
STP Pass Thru
RFC 1213 – MIB/MIB II RFC 3413 – SNMPv3 Applications
VLAN Support RFC 1493 – BRIDGE-MIB RFC 3414 – User-based Security Model for
Generic Attribute Registration Protocol (GARP) SNMPv3
RFC 1643 – Ethernet-like MIB
Generic VLAN Registration Protocol (GVRP) RFC 3415 – View-based Access Control Model
RFC 2131, RFC 3046 – DHCP Client/Relay for SNMP
IEEE 802.1p – Traffic classification RFC 2233 – IF-MIB RFC 3826 - Advanced Encryption System
IEEE 802.1Q – VLAN Tagging RFC 2271 – SNMP Framework MIB (AES) for SNMP
Protocol-based VLANs with Enterasys Policy RFC 2465 – IPv6 MIB RMON (Stats, History, Alarms, Events, Filters,
IEEE 802.3ac – VLAN Tagging Extensions RFC 2466 – ICMPv6 MIB Packet Capture)
Port-based VLAN Port (private port/private RFC 2618 – RADIUS Authentication Client Secure Copy
VLAN) MIB Secure FTP
Tagged-based VLAN RFC 2620 – RADIUS Accounting Client MIB Simple Network Management Protocol (SNMP)
VLAN Marking of Mirror Traffic RFC 2668 – Managed Object Definitions for v1/v2c/v3
802.3 MAUs Simple Network Time Protocol (SNTP)
Quality of Service
RFC 2674 – P-BRIDGE-MIB SSH v2
8 Priority Queues per Port
RFC 2674 – QBRIDGE-MIB VLAN Bridge MIB Syslog
802.3x Flow Control
RFC 2737 – Entity MIB (physical branch only) TACACS+ for Management Authentication,
IP DSCP – Differentiated Services Code Point Authorization and Auditing
RFC 2819 – RMON-MIB
IP Precedence Text-based Configuration Upload/Download
RFC 2933 – IGMP MIB
IP Protocol Web-based Management
RFC 3289 – DiffServ MIB
Queuing Control – Strict and Weighted Round Webview via SSL Interface
RFC 3413 – SNMPv3 Applications MIB
Robin
RFC 3414 – SNMPv3 User-based Security
Source/Destination IP Address
Module (USM) MIB
Source/Destination MAC Address
Page 3
Specifications
D2G124-12 D2G124-12P
Description 12-port 10/100/1000 switch with 2 SFP combo ports and 12-port 10/100/1000 PoE switch with 2 SFP combo ports and 130 watt
power brick power brick
Port 12 fixed RJ-45 10/100/1000 ports (Type 10Base-T, Type 12 fixed PoE RJ-45 10/100/1000 ports (Type 10Base-T, Type 100Base-
100Base-TX, Type 1000Base-T) TX, Type 1000Base-T)
2 combo SFP GBIC ports (a total of 12 of the 14 front 2 combo SFP GBIC ports (a total of 12 of the 14 front panel ports can be
panel ports can be active at one time) active at one time)
Power Supplies The switch supports redundant power feeds so 2 power The switch supports redundant power feeds so 2 power “bricks” can
“bricks” can be used in cases where redundancy is be used in cases where redundancy is required. See Accessories for
required. See Accessories for additional power bricks. additional power bricks.
Form Factor Fixed standalone. Two D2s side by side can be mounted Fixed standalone. Two D2s side by side can be mounted in a 19 inch
in a 19 inch rack. rack.
Memory and Processor 256 MB RAM 256 MB RAM
32 MB flash memory 32 MB flash memory
Performance
Throughput 17.86 Mpps 17.86 Mpps
Switching capacity 24.0 Gbps 24.0 Gbps
Electrical
PoE power per port (watts) NA At 40° C or less, an average of 8.3 W per port. Up to 15.4 W for Class 3
support on any port up to a system maximum of 100 watts of PoE power.
Total system PoE power decreases 2.16 W per ° C increase over 40° C.
IEEE 802.3af Compliant NA Yes
Management NMS Policy Manager, Automated Security Manager NMS Policy Manager, Automated Security Manager (additional license),
(additional license), command line interface, web browser command line interface, web browser
Physical Specs
Dimensions (HxWxD) 1.60x8.25x8.50 in / 4.06x20.9x21.5 cm 1.60x8.25x8.50 in / 4.06x20.9x21.5 cm
Net Weight (g/lb) 3.65 lb / 1.66 kg 4.02 lb / 1.82 kg
MTBF (Hrs) 105,347 82,532
Thermal Output (BTUs/Hr) 86.35 (BTUs/Hr) 107.5 (BTUs/Hr)
Environmental Specifications
Power Requirements
Input Voltage 100-240 VAC 100-240 VAC
Input Frequency 50-60 Hz 50-60 Hz
Input Current 2.0 A 3.2 A
Power Consumption (watts) 25 W 31.5 W
Temperature
Operating Temperature (C/F) 0-60° C / 32-140° F 0-50° C / 32-122° F
Non-Operating/Storage -40-70° C / -40-158° F -40-70° C / -40-158° F
Temperature (C/F)
Humidity
Standard EMC CE / FCC Class A / VCCI / C-Tick /BSMI CE / FCC Class A / VCCI / C-Tick /BSMI
Vibration
Page 4
Redundant Power Supply Equipment Specifications
D2-HIPWR-POE Combiner D2-PWR-POE
Dimensions (L x W x H) Dimensions (L x W x H)
8.16 cm (3.17”) x 9.0 cm (3.54”) x 3.29 cm (1.3”) 19.6 cm (7.72”) x 8.8 cm (3.46”) x 5.1 cm (2.01”)
Input Voltage AC Input Frequency Range
Accepts two 50V 2.6A (max) power supplies 50 – 60 Hz
AC Input Voltage Range
D2-PWR 100 – 240 VAC
Dimensions (L x W x H)
Output Voltage
16.9 cm (6.65”) x 6.5 cm (2.56”) x 3.75 cm (1.48”)
50 V 2.6 A max
AC Input Frequency Range
Net Weight (Unit Only)
50 – 60 Hz
.75 ~ .916 kgs (1.65 ~ 2.02 lbs)
AC Input Voltage Range
MTBF
100 – 240 VAC
195,130 hours at 25° C (77° F)
Output Voltage
Operating Temperature
19 V 6.32 A
0° C to 70° C (32° F to 158° F)
Net Weight (Unit Only)
Storage Temperature
0.84 kgs (1.85 lbs)
-45° C to 85° C (-49° F to 185° F)
MTBF
Operating Relative Humidity
60,000 hours at 25° C (77° F)
5% to 95%
Operating Temperature
Maximum Output Power
0° C to 40° C (32° F to 104° F)
130 W continuous
Storage Temperature
Power Consumption
-40° C to 70° C (-40° F to 158° F)
14.5 W
Operating Relative Humidity
Thermal Output
20% to 80%
49.48 BTUs/Hr
AC Input Frequency Range
47 – 63 Hz
AC Input Voltage Range
100 – 240 VAC
Maximum Output Power
120 W continuous
Power Consumption
7.3 W
Thermal Output
24.88 BTUs/Hr
Page 5
Ordering Information
Part Number Description
D2
D2G124-12 12-port 10/100/1000 switch with 2 SFP combo ports and power brick
D2G124-12P 12-port 10/100/1000 PoE switch with 2 SFP combo ports and PoE power brick
D2G124-12-POL 12-port 10/100/1000 switch with policy license
D2G124-12P-POL 12-port 10/100/1000 PoE switch with policy license
D2-GA-BNDL Guest Access Bundle - 5 D2G124-12s, 5 covers, 5 policy licenses, and 1 NS-SU-10 NMS Single User
Software License
Contact Us
For more information, call Enterasys Networks toll free at 1-877-801-7082,
or +1-978-684-1000 and visit us on the Web at enterasys.com
Patented Innovation
© 2010 Enterasys Networks, Inc. All rights reserved. Enterasys Networks reserves the right to change
specifications without notice. Please contact your representative to confirm current specifications.
Please visit http://www.enterasys.com/company/trademarks.aspx for trademark information.