Professional Documents
Culture Documents
Instruction Sheet Is Lsv5008: - Style Number Lsv5008Nr, Lsv5008Pv
Instruction Sheet Is Lsv5008: - Style Number Lsv5008Nr, Lsv5008Pv
PREPARATION
● Before beginning installation of product, make sure all parts are present. Compare parts with package
contents list and diagram above. If any part is missing or damaged, do not attempt to assemble, install or
operate the product. Contact customer service for replacement part.
● Estimated Assembly Time : 20 - 30 minutes
● Tools Required for Assembly (not included) : Flathead Screwdriver , Phillips Screwdriver, Pliers,
Electrical Tape, Wire Cutters, Safety Glasses & 8, 60 Watt, Type - B Cand Base Bulbs.
● Helpful Tools (not included) : Wire Strippers.
1 OF 3
INSTALLATION INSTRUCTIONS STYLE NUMBER : LSV5008NR,LSV5008PV
STEP 1 :
a. Determine the Rods to be assembled according to your
desired hanging height.
b. Pass the Supply Wires with Ground Wire through the
chosen Rods and then thread Rods and Socket Assembly 6” Rod
together as shown. Tighten until snug.
6” Rod
12” Rod
12” Rod
Socket
Assembly Supply Wires with
Ground Wire
STEP 2 :
a . Pass the Supply Wires with Ground Wire through the
Swivel and Ceiling Canopy.
Ceiling Canopy
b . Thread the Swivel onto the top end of the Upper Rod and
hand tighten until snug.
Swivel
Upper Rod
STEP 3: Crossbar
a . Secure the Crossbar to the Outlet Box with Outlet Box
Screws . Tighten until snug.
Outlet Box
Outlet Box Screw
2 OF 3
INSTALLATION INSTRUCTIONS STYLE NUMBER : LSV5008NR,LSV5008PV
STEP 4 :
a . Locate the Ceiling Canopy onto the Crossbar and slip the
Button Stop on the end of Lanyard into the Slot on the Crossbar
Crossbar as shown.
Slot
Button Stop
Lanyard
Ceiling Canopy
STEP 5 :
* Use Wire Connectors ( not supplied ) to connect the
WHITE OR RIBBED WHITE OR RIBBED
wires .
a . Connect the House Ground Wire to the Fixture Ground FROM HOUSE FROM FIXTURE
Wire.
b . Connect the House White ( or Ribbed ) Wire to the
BLACK ( OR RED ) WIRE BLACK OR SMOOTH
Fixture Supply Wire ( White or Ribbed Side ) .
c . Connect the House Black ( or Red ) Wire to the Fixture FROM HOUSE FROM FIXTURE
Supply Wire ( Black or Smooth Side ).
d . Wrap each connection with approved electrical tape and
carefully stuff all of the connected wires into the Outlet GROUND WIRE GROUND WIRE
Box . FROM HOUSE FROM FIXTURE
STEP 6 :
a . Place the Ceiling Canopy onto Outlet Box aligning 3 holes
on the edge of the Ceiling Canopy and Mounting Holes on Outlet Box
the Crossbar. Crossbar
b. Using screwdriver, thread Mounting Screws into the
mounting holes on the Crossbar and hand tighten until
Ceiling
snug to secure the fixture. Canopy
Mounting Screw
STEP 7 :
a . Install correct bulbs referring to fixture markings and / or labels for maximum wattage .
Your installation is completed now . Restore electricity . Retain this sheet for future reference .
3 OF 3