Professional Documents
Culture Documents
Macpower CNC Speed V 544
Macpower CNC Speed V 544
With Linear motion guide way of 35mm width on 3 axes. Machining can be done faster and
efficiently. High precision class C3 ball screws of 32 diameter and 12mm pitch are pre tensioned
and supported at both ends by high precision ball bearings. Virtually this combination gives
guarantee of superior parts accuracy.
All three axes motors are directly coupled with ball screws. This direct positive drive provides
backlash free, noise free and vibration free machining performance.
Cartridge type spindle with permanently greased packed three angular contact bearings at front
and two at back offers better stiffness. Permanently grease pack bearing eliminate rubbing heat
and provides less maintenance. Spindle is coupled with motor through Poly-V belt resulting in
noise less and vibration less rotation up to 8000 RPM. It also provides a good combination of
torque and rpm for wide selection of machining operations.