1. The document provides assembly instructions for installing a decorative fixture. It involves 11 steps including unpacking parts, making electrical connections, hanging the fixture, and installing bulbs.
2. Key steps include connecting house and fixture wires using wire connectors, securing the canopy against the ceiling, and restoring power once assembly is complete.
3. Over 100 individual parts are involved in the assembly including stems, sockets, crystals, chains, and canopy components. Proper assembly requires identifying each part and following the illustrated assembly sequence.
1. The document provides assembly instructions for installing a decorative fixture. It involves 11 steps including unpacking parts, making electrical connections, hanging the fixture, and installing bulbs.
2. Key steps include connecting house and fixture wires using wire connectors, securing the canopy against the ceiling, and restoring power once assembly is complete.
3. Over 100 individual parts are involved in the assembly including stems, sockets, crystals, chains, and canopy components. Proper assembly requires identifying each part and following the illustrated assembly sequence.
1. The document provides assembly instructions for installing a decorative fixture. It involves 11 steps including unpacking parts, making electrical connections, hanging the fixture, and installing bulbs.
2. Key steps include connecting house and fixture wires using wire connectors, securing the canopy against the ceiling, and restoring power once assembly is complete.
3. Over 100 individual parts are involved in the assembly including stems, sockets, crystals, chains, and canopy components. Proper assembly requires identifying each part and following the illustrated assembly sequence.
1 . Before beginning the installation , carefully unpack and identify
6 CORPORATE PARKWAY all parts , referring to the illustration ( FIGURE1 ). GOOSE CREEK , SC . 29445 www . quoizel . com 2 . Turn power to the installation point OFF at circuit breaker .
3 . Unfold DECORATION PART B to proper locations . Thread end
FIGURE1 of CENTER COLUMN onto top end of STEM and hand tighten until snug . Locate DECORATION PART A and match the holes on it with mounting holes on CENTER COLUMN . Thread LOCK SCREWS into mounting holes and hand tighten until snug to OUTLET BOX secure DECORATION PART A . CROSSBAR HOUSE SUPPLY and SHAKE PROOF GROUND WIRES 4 . Thread beaded end of CENTER STEM into HEX COUPLING WASHER A OUTLET BOX SCREWS underside of SOCKET CLUSTER and hand tighten until snug . LOCK NUT A ( not supplied ) Locate SPACER TUBE and CHECK RING over end of CENTER NIPPLE GREEN GROUND SCREW STEM and secure by threading HEX NUT onto the end of LOCK NUT B CENTER STEM . Hand tighten until snug . Proceed to locate SHAKE PROOF CANOPY CHAIN LOOP SHADE STOP , SHADE , SHADE STOP over end of CENTER WASHER B FIXTURE SUPPLY STEM .( Note: There are 2 kinds of SHADE STOPS, please and GROUND WIRE refer DETAIL1 and DETAIL2 for assembly. )Thread HEX NUT FIXTURE CHAIN onto the end of CENTER STEM and using plier , tighten it against SHADE gently until snug . Locate CAP , SCROLLED CEILING CANOPY PART , SMALL TUBE over end of CENTER STEM and thread FINIAL onto end of CENTER STEM until snug to secure them . CANOPY LOCK RING FIXTURE SUPPLY and GROUND WIRE 5 . Thread FIXTURE LOOP onto nipple on the top end of CENTER COLUMN . Hand tighten until snug . Proceed to locate CRYSTALS onto HANGERS on DECORATION ARMS and FINIAL . Note : There are 2 kinds of CRYSTALS . Please refer to FIXTURE LOOP illustration to decide the locations .
HANGER 6 . Fasten the CROSSBAR to the OUTLET BOX with (2)OUTLET
BOX SCREWS(not supplied). Proceed to thread LOCK NUT A CRYSTAL CENTER COLUMN and SHAKE PROOF WASHER A onto the top end of NIPPLE. Thread NIPPLE into the center of CROSSBAR. Locate the LOCK NUT B onto the bottom end of the NIPPLE. Tighten LOCK DECORATION NUT A against CROSSBAR with plier until snug. CRYSTAL ARM B DECORATION 7. Locate the FIXTURE CHAIN and determine desired hanging ARM A height of fixture. Adjust chain by removing links if needed. LOCK Please note that depending on chain material thickness, you SCREW might be required to use chain pliers to spread links open. STEM SOCKET Proceed to attach one end of chain to FIXTURE LOOP, attached CRYSTAL to top of fixture. Pass the fixture wires through FIXTURE CHAIN CLUSTER HEX COUPLING alternating links. Proceed to pass the fixture wires through the CENTER STEM following mounting components in this order: 1)CANOPY LOCK SPACER TUBE RING; 2)CEILING CANOPY ; 3 ) CANOPY CHAIN LOOP ; HEX NUT CHECK RING 4 ) SHAKE PROOF WASHER B and LOCK NUT B ; 5 ) NIPPLE ; (Detail1) 6 ) LOCK NUT A and SHAKE PROOF WASHER A . SHADE STOP 8. Making the connections: (2 people recommended for the remaining steps) Position the fixture under the ceiling mounted (Detail2) SHADE outlet box. Pass SHAKE PROOF WASHER B over the NIPPLE. Thread CANOPY CHAIN LOOP onto NIPPLE. Thread LOCK SHADE STOP NUT B down the NIPPLE, against the CANOPY CHAIN LOOP HEX NUT CAP and snug with pliers. Pass the wires through the NIPPLE. Take up wire slack and trim wires so that approx. 6” will remain inside SCROLLED PART outlet box. Proceed to attach the top of the FIXTURE CHAIN to SMALL TUBE FINIAL the bottom of the CANOPY CHAIN LOOP. Using wire connectors(not supplied) connect the HOUSE GROUND WIRE CRYSTAL to the FIXTURE GROUND WIRE ; connect the HOUSE WHITE WIRE to the FIXTURE SUPPLY WIRE (WHITE or RIBBED SIDE); connect the HOUSE BLACK (or RED) WIRE to the FIXTURE SUPPLY WIRE(BLACK or SMOOTH SIDE). Wrap each connection with approved electrical tape.
9. With the proper connections made, proceed to push the
IF IN DOUBT ABOUT ELECTRICAL CEILING CANOPY upward over the OUTLET BOX. Be sure INSTALLATION, CONSULT A LICENSED that all wires are carefully tucked into the OUTLET BOX ELECTRICIAN! cavity. Secure canopy against ceiling by threading CANOPY LOCK RING onto the CANOPY LOOP. Tighten until snug.
10 . Install bulbs referring to fixture markings and / or labels
for maximum wattage . IS-MQ2824 12 . 05 11. Restore power to the installation point ON. Retain this sheet for future reference.