Professional Documents
Culture Documents
M-Tech Strength Values
M-Tech Strength Values
Sample calculation
Page 1/4
Δ 0 − σ d F
εd = = = = d
0 0 E EA
σd 192 MPa
ε d M−Tech ®L = = = 0,0066
E 29.137 Mpa
Δ
εd = ⇒ ε d × 0 = 0,0132mm deformation by compression
0
€
Mechanical Strength Values
M-Tech® Laminated sheets with foil thickness of 0.05 mm
Page 2/4
Comparison: M-Tech®L 2,0 mm (foil thickness 0.05 mm) / M-Tech®S 2,0 mm (hard-rolled), see Page 4 for Rp0,2 resp. Rm values
Test executed by the Staatlichen Materialprüfungsanstalt in Darmstadt, Germany (23.04.2008)
1.000.000
29.137 28.656
29.464 24.998
13.185
10.000
1.000
230
200 170 192 184
130 163 140
106
100 85
10
MPa Rp0,2 E-Modul Rp0,2 E-Modul Rp0,2 E-Modul Rp0,2 E-Modul Rp0,2 E-Modul
resp.
N/mm 2 M-Tech®L – A M-Tech®L – N M-Tech®L – L M-Tech®L – C M-Tech®L – G
M-Tech®S Aluminium M-Tech®S Aluminium Alloy M-Tech®S Brass M-Tech®S Stainless Steel M-Tech®S Mild Steel
Mechanical Strength Values
M-Tech® Laminated sheets with foil thickness of 0.075 mm
Page 3/4
Comparison: M-Tech®L 2,0 mm (foil thickness 0.075 mm) / M-Tech®S 2,0 mm (hard-rolled), see Page 4 for Rp0,2 resp. Rm values
Test executed by the Staatlichen Materialprüfungsanstalt in Darmstadt, Germany (23.04.2008)
1.000.000
195.000 210.000
100.000
100.000 70.000 70.000
31.751 42.744
22.202 26.276 26.824
10.000
1.000
230 235
179 152 170 174
108 130 140
100 85
10
MPa Rp0,2 E-Modul Rp0,2 E-Modul Rp0,2 E-Modul Rp0,2 E-Modul Rp0,2 E-Modul
resp.
N/mm 2 M-Tech®L – D M-Tech®L – O M-Tech®L – M M-Tech®L – F M-Tech®L – H
M-Tech®S Aluminium M-Tech®S Aluminium Alloy M-Tech®S Brass M-Tech®S Stainless Steel M-Tech®S Mild Steel
Mechanical Strength Values
Table 3
Page 4/4