The document provides parameters for melting bronze using an induction furnace, including:
1. The volume, diameter, and height of the bronze melt charge.
2. Dimensions of the refractory lining and induction coil.
3. Thermal properties of bronze such as specific heat, melting temperature, and resistivity.
4. Operating parameters like frequency, current in the metal, and power required to melt the charge.
5. Cross-sectional area and current of the induction coil.
The document provides parameters for melting bronze using an induction furnace, including:
1. The volume, diameter, and height of the bronze melt charge.
2. Dimensions of the refractory lining and induction coil.
3. Thermal properties of bronze such as specific heat, melting temperature, and resistivity.
4. Operating parameters like frequency, current in the metal, and power required to melt the charge.
5. Cross-sectional area and current of the induction coil.
Copyright:
Attribution Non-Commercial (BY-NC)
Available Formats
Download as DOCX, PDF, TXT or read online from Scribd
The document provides parameters for melting bronze using an induction furnace, including:
1. The volume, diameter, and height of the bronze melt charge.
2. Dimensions of the refractory lining and induction coil.
3. Thermal properties of bronze such as specific heat, melting temperature, and resistivity.
4. Operating parameters like frequency, current in the metal, and power required to melt the charge.
5. Cross-sectional area and current of the induction coil.
Copyright:
Attribution Non-Commercial (BY-NC)
Available Formats
Download as DOCX, PDF, TXT or read online from Scribd
2 Diameter of melt (dm) 39 cm 3 Height of melt (Hm) 40 cm 4 Thickness of the refractory 5 cm lining (Br) 5 Internal diameter of the 50.1 cm inductor (D¿) 6 Height of inductor coil (H ¿) 6 cm 7 Height of furnace from cm bottom of the bath to the pouring spout ( H f )
Thermal parameters of Bronze
Parameter Value Unit 1 Specific Heat Capacity 376 kJ/kg.k 2 Melting Temperature 860 k° 3 Latent Heat 176 kJ/kg 4 Electrical resistivity 0.15 μΩ-m 5 Density 8800 kg /m3 Parameter Value Unit 1 Optimum Operating 750 Hz frequency (f) 2 Resistance of charge 523 μΩ material (RL) 3 Current in the metal (Im) 4.75 kA 4 Power required to melt 11.78 kW the charge in 20 minutes (P) 5 Coil tube cross sectional 21.99 mm2 area (At) 6 Coil current (Icoil) 659.7 A 7 Number of coil turns (N) 8 turns 8 9 10