Professional Documents
Culture Documents
Document Name
Document Name
F -X C h a n ge
PD
F -X C h a n ge
O W !
bu
c u -tr a
to
bu
N
c u -tr a c k
.c
O W !
o
Date: May-30-2011
w
w
13 4 5
17
18
RO Recovery [13/4] = 60.0% Design Temperature = 25.0 Deg C PASS 1 Array Recovery [13/4] = Element Age Fouling Allowance (FA) Bank Element Type 1 TFC 8040-SW-335 System/Pass Total Pressure with FA Stream (Bar) 1 0.0 4 0.0 5 50.6 13 0.0 17 0.0 18 50.3 = 60.0% = 2.00 Years = 0.0% Tubes Elems /Bank /Tube 5 Avg Flux (LMH) 7 16.5 16.5
Flow Rate TDS 180C Hardness Chloride (m3/Hr) 30.0 30.0 30.0 18.0 18.0 12.0 (mg/L) 23792.13 23792.13 23792.31 201.46 201.46 59178.65 (CaCO3) 2918.4 2918.4 2918.4 4.7 4.7 7288.9 (mg/L) 14578.8 14578.8 14578.8 121.1 121.1 36265.4
PD
F -X C h a n ge
PD
F -X C h a n ge
O W !
bu
c u -tr a
to
bu
N
c u -tr a c k
.c
O W !
o
Date: May-30-2011
w
w
CHEMICAL ADDITION No Chemical Treating CONCENTRATE SATURATION DATA - STREAM 18 Langlier Index = 1.490 <== Warning: Scaling Potential Stiff-Davis Index = 0.213 <== Warning: Scaling Potential DESIGN WARNINGS - PASS 1: None
APPROXIMATE PUMPING POWER REQUIREMENTS (kW) Feed pumping power (w/FA) @65.0% efficiency Interbank pumping power @65.0% efficiency NOTE This projection is the anticipated performance and is based on nominal properties of the elements, with manifold losses as included. The fouling allowance option (if included) increases the required 'clean water' net driving pressure by the stated percentage. Program default values are estimates only, and may not be representative of the actual fouling potential of the water source. This software is provided by Koch Membrane Systems, Inc as a service. The projections are based upon input by the User, and assume that sound engineering principles and practices have been followed. This printout should not be considered a warranty or guarantee unless accompanied by a statement to that effect from Koch Membrane Systems, Inc. 64.81 0.00