Professional Documents
Culture Documents
Megger Electrical Test Instruments Catalog: Toll Free Customer Service Number
Megger Electrical Test Instruments Catalog: Toll Free Customer Service Number
1-866-254-0962
The word Megger is a registered trademark
WWW.MEGGER.COM/US
MIT400 Series conform to IEC1010-1, CAT IV 600 V rating, offer greater functionality with simplified operation MIT300 Series provides an instrument for all levels of testing MIT200 Series is economical, rugged and easy to use
n n
TABLE OF CONTENTS
5/10-kV Insulation Test Equipment MIT510/2 and MIT520/2 ...........................................................2 MIT1020/2 .................................................................................3 5-kV and 10-kV Test Leads ......................................................5 1-kV Insulation Test Equipment MIT400 Series ...........................................................................6 MIT300 Series ...........................................................................8 MIT200 Series ...........................................................................8 Major Megger Insulation Resistance Testers........................10 Pocket Midget Megger ..........................................................10 Additional Insulation Test Equipment MIT30 .....................................................................................11 MJ15 and BM15 ....................................................................11 DC Dielectric Test Sets ..........................................................11 Megohmmeters ......................................................................11 Ground Resistance Test Equipment Three-terminal Model ............................................................12 DET3 Contractor Series .........................................................13 DET4T2 Enhanced Series .......................................................13 DET10C and 20C Clamp-on Models ......................................16 DET2/2 High Sensitivity Model ..............................................17 AC Loop Impedance Testers LT300 High Current Loop Tester ...........................................17 Digital Low Resistance Ohmmeters NEW DLRO10HD .....................................................................18 DLRO-10 and DLRO-10X ........................................................18 General Purpose DLROs (247000 Series) ..............................19 BT51 Milliohmmeter ..............................................................19 DLRO200 and DLRO200-115 ..................................................19 Multimeters M8000 Series ..........................................................................22 AVO300 Series ........................................................................22 VF2 AC Voltage Detector ......................................................22 Clampmeters MMC850 Multi-conductor AC Digital Clampmeter .............23 DCM300E AC Leakage Clampmeter ......................................23 DCM310, DCM320, DCM330, DCM340 .................................23 Time Domain Reflectometers TDR900 / TDR500 ....................................................................24 CFL510F / CFL535F / CFL535P .................................................24 NEW DATACOM TEST EQUIPMENT SCT Series Structured Cable Testers ......................................26 SCT Series Multimode and Singlemode Fiber Adapters ...................................................26 SCT Alien Crosstalk Adapter ..................................................26 Substation Test Equipment Handheld TTR20 .....................................................................27 Single-phase, Hand-crank TTR...............................................27 Semi-automatic Oil Test Set ..................................................27 Battery Impedance Test Equipment ProActiv Battery Database Management Software ...........28 BITE 3 ......................................................................................28 BITE 2 and BITE 2P .................................................................29 Special Maintenance Equipment Electrical Appliance Testers ...................................................30 Cable Locators/Route Tracers ................................................31 Three-Phase Sequence Equipment........................................32 Motor & Phase Rotation Test Sets ........................................32 Cable Phasing Meter ..............................................................32 Phase Sequence Test Sets ......................................................32 Leak & Corona Detectors .......................................................33 Coating Thickness Gauge ......................................................33 Safety Test Equipment DETEX Voltage Detectors and Phasing Testers ..................34 Test and Measurement Software Maintenance Test Data Management Software..................35 Cross Reference Guide ................................................ 36
Use this handy cross-reference guide to determine the most appropriate products for your targeted markets. I nsulation Testers 5 /10 kVs 1 kVs Pages 2-5 Pages 6-10 Airports n n CATV n Commercial Building n Datacommunications Electric Utility/ n n Industrial Substations Government/Military n n Manufacturing n n Mining n n Petrochemical n n Ports n n Railroads n n Rapid Transit n n Telecommunications n (Cellular, POTs, etc.) Universities n n Water/Waste Treatment n Wind/Renewable Energy n n
Products
DLROs
Pages 18-20 n
SCT
Markets
n n
n n
n n n n n
n
n
n
n
n
n n n n n n n n n
n n n n
n n
n n n n n n n n
n n n n n n
n n n n
n n
1-866-254-0962 www.megger.com/us
PowerDB Lite, a unique software program, is included with the Megger MIT520/2 and MIT1020/2 units. PowerDB Lite offers an easy-to-use interface for products to document results. You can easily run tests, retrieve data, annotate results and print complete test forms. See Page 35 for more information on this powerful software!
Dual operation from both rechargeable batteries and line supply affords maximum reliability and insurance against human error when recharging is overlooked. Measurement range has been expanded to 15 Teraohm, replacing the ambiguous infinity reading with an actual number that can be used for predictive/preventive trending on the highest quality insulation. Test voltages are 250, 500, 1000, 2500 and 5 kV Capacitance is measured from 10 nF to 50 F, contributing an additional valuable piece of analytical information. Testing is inhibited above 50 V of external voltage for redundant safety.
trending values for the best of insulating materials and highest capital equipment.
n
Expanded test voltage range from 50 V to 10 kV, in 10 V increments to 1 kV and 25 V increments above 1 kV. Additional automated standardized tests to include Step Voltage, PI, Dielectric Absorption Ratio and Dielectric Discharge tests. Capability to measure capacitance of test item from 10 nF to 50 F, providing the operator with an additional valuable diagnostic tool. RS232 and USB download of results. (Cables included.) 250, 500, 1000, 2500, 5 kV and 10 kV preprogrammed test voltages.
n n
Improved Diagnostic Measurement All 3 units feature an industry best guard terminal performance
The MIT1020/2, shown above, and the MIT520/2, shown below, come with PowerDB Lite
The MIT520/2 adds expanded capabilities to the MIT510/2 to afford the skilled and experienced operator more flexibility in analyzing the condition of capital equipment.
n
Test voltage can be set in any 10 V increment from 50 V to 1 kV, and above 1 kV in 25 V increments to 5 kV. Capable of downloading test results from its RS232 or USB ports. (Cables included.) Five different industry-standard tests can be programmed and run automatically.
1-866-254-0962 www.megger.com/us
MIT510/2 1000-372
n n n
MIT520/2 1000-376
n n n
MIT1020/2 1000-380
n n n n n n n n n
Analog/Digital Line power Rechargeable 10.0 kV 5.0 kV 2.5 kV 1.0 kV 500 V 250 V 10 V steps 50 V to 1 kV, 25 V steps 1 kV to max test voltage Max reading Min reading Voltage Capacitance and time constant Leakage current Auto IR Polarization index Step voltage Dielectric discharge Dielectric absorption ratio CAT IV 600 V safety rating Timer control Timer display 3mA test currents
n n n n n
n n n n n
15 T 10 k
n n n
n
15 T 10 k
n n n n n n n n n n n n n n n n n n
35 T 10 k
n n n n n n n n n n n n n n n n
n n
n n
RS232 output (cable included) Calibration certificate included IP65 rating Alarm limit mode Compatible with Megger download software Guard terminal performance
2 % error guarding 500 k leakage with a 100 M load $3,330.00 $4,335.00 $5,240.00
Following is a brief summary of the highlights of Standard 43-2000, the IEEE Recommended Practice for Testing Insulation Resistance of Rotating Machinery.
n Test voltages up to 10 kV are recommended for windings
are recommended.
n Test results should be compared to historical values to
identify changes.
4 Megger Products Catalog
Control Circuit Test Set These clips are designed for testing low voltage circuits with test voltages up to 1 kV. The insulation is designed only to protect the user from the output of Megger 5-kV and 10-kV insulation resistance testers set to a maximum output voltage of 1 kV. Do not use this lead set at voltages above 1 kV.
Cat. No. 6220-811 6220-820 8101-181 8101-182 8101-183 6220-822 Description Large Test Clip Medium Test Clip Compact Test Clip Compact Test Clip Compact Test Clip Control Circuit Test Set
Dimensions (Closed) 8.7 x 5. 2 in. (220 x 134 mm) 5.4 x 2.9 in. (139 x 73 mm) 2.2 x 1 in. (58 x 25 mm) 2.2 x 1 in. (58 x 25 mm) 2.2 x 1 in. (58 x 25 mm) 2.2 x 1 in. (58 x 25 mm)
Length 10 ft (3 m) 10 ft (3 m) 10 ft (3 m) 25 ft (8 m) 50 ft (15 m) 10 ft (3 m)
Jaw Number Opening in Set 1.3 in. (34 mm) 1.3 in. (34 mm) 0.7 in. (18 mm) 0.7 in. (18 mm) 0.7 in. (18 mm) 0.8 in. (20 mm) 3 3 3 3 3 2
Insulation Rating Basic Double 10 kV dc 6 kV dc None None None N/A 5 kV dc 3 kV dc None None None 1 kV dc C lip or Prod
CAT Rating 1000 V ac CAT IV 1000 V ac CAT V N/A N/A N/A N/A
1-866-254-0962 www.megger.com/us
The MIT400 Series of insulation testers meet the most stringent requirements for installation, maintenance, service and repair in the electrical, power and telecommunications industries. The instruments feature Meggers patented dual digital and analog arc displays showing both measurement result and the actual test voltage being delivered simultaneously. The units include an exceptional insulation resistance measurement range that extends from 20 Gigohms to 200 Gigohms, with the option to display the insulation test voltage or leakage current on the secondary display. Measurement of cable distance by capacitance is featured on two of the units, providing a convenient cable length test. A 200 mA continuity measurement is available with a 0.01-ohm resolution for fast accurate cable/wire resistance measurement. This can be set to 20 mA where conformity to electrical testing regulations is not required, extending battery life. TRMS voltage measurement allows accurate measurement on noisy lines providing a wide range of measurement applications.
n Petrochemical n Ports n Railroads/Rapid Transit n Telecommunications (Cellular, POTs, etc.) n Universities n Water/Waste Treatment n Wind/Renewable Energy
MIT400 Series
n n
Conform to IEC1010-1, CAT IV 600 V rating. Choice of 4 models for commercial and plant applications: MIT Models 400, 410, 420 and 430. Choice of 5 models for telecom/CATV applications: MIT Models 410-TC, 430-TC, 480, 481 and 485. A Special Applications model, MIT40X, offers a variable insulation test voltage from 10 V to 100 V applications in 1 V steps. The MIT410-TC and MIT430-TC are designed specifically for use within the telecommunications industry. Unique features include a soft canvas carrying bag with shoulder strap and rugged snap hook to attach to a tool belt, and a bed of nails test lead set. The MIT430, MIT430-TC and MIT485 are compatible with Megger Download Software (included) allowing further analysis and storage data. The MIT415 is the ideal instrument for ESD testing and maintenance.
TC Models The MIT410-TC and MIT430-TC are designed specifically for use within the telecommunications industry. Unique features include a soft canvas carrying bag with shoulder strap and snap hook to attach to a tool belt, and a bed of nails test lead set. The model MIT430-TC offers extensive results storage capability for later recall and Bluetooth download capability for wireless transfer of stored results to a PC. The MIT410-TC and MIT430-TC allow the user to determine the condition of the insulation of twisted copper cable pairs, which could cause problems for services such as voice, video, and data or VOIP. When the insulation becomes weak or brittle, causing cracks or exposing copper within the cable, or water ingresses into the cable, the insulation resistance test will identify these situations immediately.
1-866-254-0962 www.megger.com/us
Cat. No. Insulation Voltage Range 50 V, 100 V 250 V, 500 V 1000 V 10 to 100 V variable Insulation range (G) Continuity Measurement K range to 999 K 0.01 to 100 Variable current limit, 200 mA/20 mA Additional Functions ac and dc voltage measurement (TRMS) Frequency: 40 Hz to 400 Hz Capacitance (0.1 nF to 10 F) Insulation timed, PI, DAR tests Additional Features Result storage Compatible with Megger download software Bluetooth downloading Included Accessories Remote switch probe Silicone test leads Bed of nails test leads Calibration certificate Carry case: Blow molded Soft canvas (shown in picture on previous page) Three-year warranty List Price USD
n n n n n
n n n
n n n
n n
n n n
n n n
n n n
20
n n n n
100
n n n n n n
200
n n n n n n n n
200
n n n n n n n n n n
100
n n n n n
200
n n n n n n n n n n
10
200
n n n n n n n n
200
n n n n n n n n n n n n n n
2-20
n n n
n n n n
n n n
n n
n n
n n n n
n n n n
n n
n n
n n
n n
n n
n n n n
n n n n n n n n
$565.00 $635.00
$585.00 $700.00
$795.00
$635.00
$825.00
$625.00
$845.00
$950.00
$670.00
MIT300 Series
The MIT300 Series of insulation testers includes five models to meet the needs of electrical contractors. They incorporate features such as automatic discharge, audio-visual warnings, and test inhibition to ensure operator safety and protection from accidental misuse. The MIT310 adds a voltmeter function. The MIT320 has a backlight, illuminated panel, k range, limit alarm and adjustable continuity buzzer. The MIT330 can store up to 1000 test results. The MIT310A features a genuine mechanical analog display. The MIT300, MIT310, MIT320 and MIT330 feature an exclusive analog/digital display that clearly shows measurement results.
MIT200 Series
The MIT200 is one of the smallest insulation testers available on the market today. With four product options available, all the MIT200 instruments offer a range of safety and operation features expected from a Megger tester. The combined analog pointer and digital readout provide both accuracy and charge/discharge characteristics. Voltage warning and display, plus voltage lockout protect both the user and the instrument, if accidentally connected to a live circuit. The MIT200 Series meet a wide range of international testing standards as well as BSEN 61557 and IEC61010.
Cat. No.
Cat. No.
Insulation testing
n n n n n 250 V n n n n n 500 V n n n n 1000 V n n n n n Range to 999 M Insulation limit alarm n n (0.01 M to 999 M) Continuity testing n n n n n Continuity to 100 n n n n n Continuity buzzer n n n n Lead null to 9 0.5 n n Adjustable buzzer 1 to 20 n n Audible buzzer disable Resistance measurement n n 10 to 1 M range n 10 to 2 K range General n Voltage warning n n n n Default voltmeter n n Backlit display n n Backlight selector ranges n n n n n Locking test button n n n n Auto power-down n n Switched test probe n n n n n IP54 weatherproof n 1000 test result storage n Downloading n n n n Calibration certificate n n n n Three-year warranty List Price USD $435.00 $495.00 $585.00 $645.00 $500.00
Insulation testing 250 V 500 V 1000 V 1000 M range Auto-ranging Auto discharge Test inhibit Live circuit voltage display Continuity testing Continuity @ >200 mA Continuity to 0.01 Test lead null (9.99 ) Automatic continuity test Continuity buzzer with 5 threshold Default volts warning General Digital display + arc Battery condition Auto power down Tough carry case Test leads CATIII 600 V List Price USD
n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n
n n n n n n
n n
n n n n n
n n n n n
n n
n n
n n
$345.00
$370.00
$425.00
$485.00
1-866-254-0962 www.megger.com/us
Cat. No. Test Voltage (V dc) Insulation Resistance 212159 212359 212459 212559 210600 210170 100, 250, 500, 1000 100, 250, 500, 1000 100, 250, 500, 1000 100, 250, 500, 1000 100, 250, 500, 1000 100 250 500 1000 0 to 2000 M 0 to 2000 M 0 to 2000 M 0 to 2000 M 0.10 to 1999 M 0 to 20,000 M
Line/Recharg. Battery $1,075.00 with internal charger 6 AA cells Hand-cranked $1,040.00 $1,190.00
Request your particular instrument using the appropriate catalog number. Need help determining an instrument for your particular needs? Call your local Megger authorized distributor or dial 866-254-0962
Cat. No.
Features
n n n n n
WM6 (21805-3)
500
Tests up to 200 M at 500 V dc Easy-to-read high contrast analog scale Comes complete with case and leads Hand-cranked, Midget Megger 0 to 100 continuity range $895.00
10
MIT30
30 kV
n User selectable current trip point, 0-360 Amp n Robust bright LEDs visible in direct sunlight n Built-in adjustable ionization indicator n Wide input power range
$7,450.00
MJ15 BM15
$2,410.00
$2,185.00
DC Dielectrics 5 kV
n Ideal for insulation resistance measurements in
220005
$3,110.00
220015
15 kV
n Fast charging of high capacitance equipment n Analog metering range switching for greater accuracy n Continuously adjustable Variac
$4,190.00
Megohmmeters
testing 5 kV
n Analog metering for monitoring of variable
210400
measurements
n Guard terminal eliminates surface leakage current
$3,235.00
210415
15 kV
$4,555.00
Request your particular instrument using the appropriate catalog number. Need help determining an instrument for your particular needs? Call your local Megger authorized distributor or dial 866-254-0962
n Petrochemical n Ports n Railroads/Rapid Transit n Telecommunications (Cellular, POTs, etc.) n Universities n Water/Waste Treatment n Wind/Renewable Energy
n Electric Utility/
Industrial Substations
n
Government/Military
PowerDB Lite, a unique software program, is included with the Megger ground testers. Ground testing methods covered by PowerDB Lite include:
n
3-Terminal Model
This economically priced, general purpose instrument makes routine tests quick and easy for applications on simple grounding systems where a very low resistance is not expected.
n Tried-and-proven analog version n Will tolerate 2 V peak-to-peak of voltage interference n Measures ground resistance down to 0.5 n Limits output to 50 V open circuit, 5 mA short circuit
12
Whats in the DET3T Name? DET3TC D E T Digital Earth Tester DET3TD D Digital E T Earth Tester
DET4TD2, above DET4TC2, left
1-866-254-0962 www.megger.com/us
13
The ART method is more convenient and significantly reduces your testing time as much as 40 percent! The DET4TC2 and DET4TCR2 offer ART capability as well as stakeless testing and of course 4, 3 and 2 pole testing.
DET3TD
n n
3-wire Resistance ART (Attached Rod Technique) Resistance Measurement Resistance Range Ground Voltage Range List Price USD
Ground Current Range (with optional current measuring clamp) 0.5mA to 19.9A
DET4T2 Series
Tests Output
Selection Guide
Model No. Cat. No. 2-Pole Measurement 3-Pole Measurement 4-Pole Measurement Soil Resistivity ART (Attached Rod Technique) Capability Stakeless (Clamp-on) Measurement Capability Resistance Range Ground Voltage Range Ground Current Range (with ICLAMP) Capability Selectable Voltage (25/50 V) Test Frequency Alkaline Batteries Rechargeable Batteries 40 V Peak-to-Peak CAT IV 100 V Rated to IP54 Hard Carry Case Test Leads (49 ft, 33 ft, 33 ft, 10 ft) and Spikes External ac/dc adapter Certificate of Calibration 3 Year
DET4TD2 1000-347
n n n n
DET4TR2 1000-324
n n n n
DET4TC2 1000-345
n n n n n n
DET4TCR2 1000-346
n n n n n n
0 .01 to 20,000
n
128 Hz
n
Power Supply Noise Rejection Safety Rating Ingress Protection Included Accessories Warranty List Price USD
n
n n n n n n n n n n n n n n
n n n n n
n n
n n
$1,200.00
$1,445.00
$1,525.00
$1,785.00
14
DET4TD2 D Digital E Earth T Tester 4T 4 Terminal D Disposable Battery 2 2nd Generation DET4TR2 D Digital E Earth T Tester 4T 4 Terminal R Rechargeable Battery 2 2nd Generation DET4TC2 D Digital E Earth T Tester 4T 4 Terminal C Works with Clamp 2 2nd Generation DET4TCR2 D Digital E Earth T Tester 4T 4 Terminal C Works with Clamp R Rechargeable Battery 2 2nd Generation
Model No. Cat. No.
Disposable
Rechargeable
n n n n
n n n n n n n n
n n n n n n n n
n n n n n n n n
n n n n
n n n n
n n n n
n n
n n n n
Ordering Information Cat. No. 6320-245 Description Unit Price USD $690.00
1-866-254-0962 www.megger.com/us
15
$1,660.00
DET10C and 20C come with a rugged carry case, calibration fixture, carry case shoulder strap and interface cable (DET20C only).
16
Description
$680.00
1-866-254-0962 www.megger.com/us
17
n n n n
NEW DLRO10HD Battery powered Line powered IP65 lid closed IP54 in use
Airports Electric Utilities/Industrial Substations Government/Military Ports Power Plants Railroads/Rapid Transit Telecommunications (Cellular, POTs, etc.) Universities Water/Waste Treatment Wind/Renewable Energy
DLRO10HD
NEW
The all new DLRO10HD is a heavy-duty addition to the successful DLRO10 range. Common with the DLRO10 series the instrument features output power limiting to 0.25 so as not to heat the test piece. However, the DLRO10HD has the additional benefit of combining this with two high power, high compliance ranges. Benefits include the ability to use much longer test leads if required, the ability to heat and, therefore, identify circuit weakness. In addition, with the ability to maintain 10 A for at least a minute, this allows for improved testing of inductive loads.
The DLRO10HD is truly heavy duty in all respects physically the instrument is designed to operate in the harshest of conditions, surviving knocks, drops, dusty and wet conditions. It can be used in the rain and with the lid closed is sealed to IP65. Its electrically heavy duty too; no need to worry about inadvertent connection to live supplies. High input protection shrugs it off without even blowing a fuse. The DLRO10HD is battery powered, but is equally at home running on a line supply, even while charging the battery. This means the instrument is at home is manufacturing environments, never having to wait for the battery to charge. The DLRO10HD is always ready to test.
18
charger for hours of testing Single-Pak DLRO (Cat. No. 247001) n Measuring circuits, rechargeable batteries, and charger in one selfcontained unit
n Housed in a tough case with
Single-Pak/Low-Range DLRO (Cat.No. 247002) n Features a current-reversing switch to average out voltage offset
n Includes captive wing nuts n Adds an extra decimal of resolution
BT51 Milli-Ohmmeter
n Stable, accurate and reliable n Two measuring ranges (2000 m and 20.00 m) n Four terminal measurement
DLRO200
Ordering Information
$2,650.00
19
1-866-254-0962 www.megger.com/us
DLRO-10
DLR0-10X
247000
247001
247002
DLRO200
DLRO200-115
Output Current 10 Amp 200 Amp Additional Smoothing Resistance Range 0 to 599.9 0 to 1.9999 m 0 to 5.999 m 0 to 19.999 m 0 to 59.99 m 0 to 199.99 m 0 to 599.9 m 0 to 1.9999 0 to 5.999 0 to 19.999 0 to 59.99 0 to 199.99 0 to 1999.9 0.1 to 999.9 m 0 to 2500.0 0 to 25.000 m 0 to 250.00 m 0 to 2500.0 m 0 to 25.000 0 to 250.00 0 to 2500.0 Resolution *0.1 1 10 100 1 m 10 m 100 m Accuracy 0.2% + 2 lsd 0.25% + 1 lsd 0.3% + 2 lsd *0.5% + 2 lsd *1.00% 0.2% 200 m 0.2% 20 m 0.2% 2 m 0.2% 200 0.2% 20 0.2% 2 0.2% 0.2 Power Source Rechargeable Battery Line Power List Price USD
n n n
n n n n n n n n n n n n n n
n n n
n n n n n n n
n n
n n
n n
n n n n n n n n
n n n n n n n
n n n n n n
n n n n n n
n n n n n
n n n n n n n n n
n n n n n n
n n n n n n
n n
n n
n n
$3,200.00
$2,960.00
$3,690.00
$5,900.00
20
242021-18 Potential Hand Spikes 18 ft. (5.5 m) 242021-30 30 ft. (9 m) 242041-7 242041-18 242041-30 242144-16 242144-26 Current Clamps 7 ft. (2 m) 30 ft. (9 m) 16 ft (5 m) 26 ft (8 m) Current Terminal Clips 18 ft. (5.5 m)
Heavy Duty C-Clamps Current passes through the C-Clamp and screw thread; potential passes through a fourpoint anvil insulated from the clamp metal. Cat. No. 242004-7, 242004-18, 242004-30
Cat. No. 242004-18
Kelvin Clips Feature spade lugs on outboard end and alligator clips with insulated, silver or gold plated jaws. Cat. No. 241005-7, 242005-7, 242006-7, 242006-18, 242006-30
7 ft. (2 m) 18 ft. (5.5 m) 30 ft. (9 m) 7 ft. (2 m) 16 ft (5 m) 26 ft (8 m) 7 ft. (2 m) 18 ft. (5.5 m) 30 ft. (9 m) 7 ft. (2 m) 7 ft. (2 m) 7 ft. (2 m) 18 ft. (5.5 m) 30 ft. (9 m)
10 A 10 A 10 A 10 A 100 A 100 A 10 A 10 A 10 A 10 A 10 A 10 A 10 A 10 A
$460.00 $650.00 $733.00 $651.00 $805.00 $915.00 $350.00 $445.00 $515.00 $480.00 $165.00 $290.00 $425.00 $750.00
Hand Spikes, DH Series Feature indicator lights in one of the probes which duplicate warning and signal lights on the instruments. Cat. No. EV6111-503 (DH4), EV6111-517 (DH5).
Cat. No. EV6111-503
NEW
Wind Turbine Lightning Protection Test Lead Set Specially designed for measuring resistance of lightning protection circuit between wind turbine blade tip to ground. Cat. No. 1000-809
Current Lead with 16 ft (5 m) HD Clips and 33 ft (10 m) Separate Potential 49 ft (15 m) Leads with Clips 16 ft (5 m) Kelvin clip and hook ends on HD cable reel 328 ft (100 m) with friction brake DH2 lead with duplex hand spikes and 16 ft (5 m) hook end
* Used with DLRO10 and DLRO10X only ** Gold plated *** Silver plated
1-866-254-0962 www.megger.com/us
21
MULTIMETERS
Megger multimeters provide the complete solution to electrical and electronic troubleshooting. All instruments undergo rigorous testing throughout their design and manufacture and are suitable for use in the following markets:
n n n n n n
n n n n n n
Petrochemical Ports Telecom (Cellular, POTs, etc.) Universities Water/Waste Treatment Wind/Renewable Energy
Description
$9.95
M8000 Series
M8035 n Professional multimeter with 0.08% accuracy and enhanced functions
n Adds relative functions, MIN,
Cat. No. Voltage Ranges V ac V dc V ac/dc Accuracy ac Conversion Type Average Responding TRMS Current Ranges A ac
M8037
0.08%
10 10 40 M
n n
10 10 40 M
n n
10 10 40 M
n n
10 10 40 M
n n
A dc Resistance Continuity Audible Buzzer Diode Conductance in nS Capacitance in mF Frequency in Hz Duty Cycle Display Single Parameter Dual Parameter Number of Digits Bar graph Backlit Operation Auto Ranging Data Hold Max/Min Record
AVO300 Series
n All units feature simple to use
400 40 4 M
400 40 4 M
n
autoranging functions
n The unique case design has
1 3 2
n n
1 3 2
n
n n 3 3 3 3 4 4 & 3 4 4 4 & 3 4 n n
n n n n n
n
n n n n n
read with .75 in. (19 mm) high characters. The AVO310 features a backlight
n Powered from a standard 9V battery n Meet the safety requirements of CAT III 600V
n n n
Relative Function Rubber Boot Protection Safety Warranty Period List Price USD
22
CLAMPMETERS
Megger clampmeters are ideal for use in the installation, maintenance, monitoring, or checking of electrical systems and equipment. These products offer a safe, accurate, nonintrusive method of diagnosing faults on live electrical circuits.
currents
n Data hold button retains the measurement on the LCD for
in multiconductor cables
n No need to split cables n Flat or round section cables n Backlit display n Cable centralizing clamp n Measure current on single-, two- and
Ordering Information
Cat. No.
DCM300E
Leakage Clampmeter
$440.00
Ordering Information
$295.00
DCM330
n Open-jaw design enables simple and
fast measurements
n ac and dc voltage measurements up
to 1000 V
n Resistance range up to 20 M n Continuity buzzer and diode check n Non-contact detection of ac voltage n CAT IV, 600 V
Measurement Range
DCM310
1-866-254-0962 www.megger.com/us
23
n n n n
TDR900
n Digital read-out TDR and cable length meter n Autoranging for measuring power, telephony, CATV and LAN CF535F shown in use
cable lengths
n Extra large, high resolution backlit LCD n Internal library of 39 standard cable types n Cable length calibration function n Used only on de-energized circuits
CFL510F
n Automatic event finder key n No blocking filter required for live line testing up to 300 V ac n Simple keypad; bright, backlit LCD
TDR500
n Full TDR trace at a low cost n Adjustable velocity factor n Warble tone generator for tracing faulty cable pairs n Used only on de-energized circuits
CFL535F/CFL535P
n No blocking filter required for live line testing up to 300 V ac n Output pulse amplitude control n Automatic event finder key n Graphical help menu n Dual channel, stress and comparison of previous traces n Comes equipped with dual fused, fitted test leads
24
Cat. No. Measurement Ranges (Full scale) Fault Location Modes Display Accuracy Resolution Gain Velocity Factor Output Impedance () Output Pulse Pulse Amplitude Low Battery Warning TX Null Channels Auto Shutdown Result Storage Download to PC Printer Connection Rating Included Accessories Lead Set* Test/Carry Case Serial Download Lead Download Software Batteries 3-Year Warranty List Price USD
TDR900 6200, 8000, 9800, 12,000 ft (1900, 2400, 3000, 3700 m) 1 Numeric 2 % 20 in. (50 cm) N/A 1.0 to 99.9% 25, 50, 75, 100, 125, 150 Automatically set 7 ns - 3 s 5 V pk to pk n
n
TDR500 100, 300, 1000, 3000, 10,000 ft (30, 100, 300 1000, 3000 m) 1 Graphic 1 % 1% of range Automatic 0.30 to 0.99 100 25 ns - 3 s 5 V pk to pk n N/A N/A 1 n N/A N/A N/A IP54
n n
CFL510F 30, 90, 300, 900, 3000, 9000 ft (10, 30, 100, 300, 1000, 3000 m) 1 Graphic 1 % 1% of range 4 steps 0.01 to 0.99 25, 50, 75, 100 7 ns - 3 s nominal 3 V; 5 V
n n n
CFL535F (CFL535P*) 150, 300, 600, 1200, 24,000, 48,000 ft (50, 100, 200, 400, 4000, 8000, 16,000 m) 11 Hi resolution/Graphic 0.1 % 0.1% of range 15 steps to 90 dB 0.300 to 0.999 120 20 ns - 16 s 5 V pk to pk and 14 V pk to pk
n n n
Backlight
2 n n n n IP54
n n n n n
N/A N/A
n n
$380.00
n $3,115.00
*Note: Cat. No. CFL535P comes equipped with dual fused, fitted test leads.
Request your particular instrument using the appropriate catalog number. Need help determining an instrument for your particular needs? Call your local Megger authorized distributor or dial 866-254-0962
1-866-254-0962 www.megger.com/us
25
NEW
NEW
NEW
The SCT Series are high-performance testers for certifying and evaluating copper and fiber cabling installations. The SCT Series are unmatched for flexibility, with device features including large 1/4 VGA color display, USB and serial ports, compact flash, secure digital multimedia card storage, unit-to-unit audio and 64 Mb of internal memory. The SCT Series certifies twisted pair to all approved ISO and TIA standards, including ISO Class F. Their frequency range of 1 to 1,000 Mhz (1 GHz) exceeds ISO Class F by 400 MHz and meets proposed TIA Category 6a requirements. The Series also meet Level III and proposed Level IV accuracy requirements. Important features include:
n
Change from copper to fiber testing by snapping in an adapter, no configuration necessary Speed diagnostics with built in VFL that can locate and visibly identify faults on fiber optic cables Tools to speed testing include Fiber Map, bi-directional and unidirectional testing Rugged fiber optic adapter with patented connector-less interface reduces down time
Saves test time by allowing the user to select or modify the Circuit Identification number during a test Improved results analysis by displaying results in multiple formats Selectable link diagnostics from the test menu for quickly identifying the distance to the source of a link fault speed link fault correction
NEW
The Megger Alien Crosstalk certification kit is the most cost effective, intuitive and easy to use 10GBASE-T certification solution on the market. It is fully compliant with all existing and draft 10GBASE-T standards.
n Performs alien crosstalk certification for copper 10GBASE-T
adapters eliminate virtually all potential adapter or tester damage, keeping the SCT on the job
Ordering Information for Datacom Test Equipment Cat. No. Description List Price USD
Structured Cable Tester Structured Cable Tester SCT-MMA set of two multimode fiber adapters SCT-SMA set of two singlemode fiber adapters SCT-AXT set of two alien crosstalk adapters
26
n n
Used for testing single- and three-phase power and distribution transformers up to 1 Amp
Handheld TTR20
The TTR20 is an excellent complement to the world-renowned hand-cranked TTR. It can measure the full range of transformers, even high MVA types. It measures three-phase transformers phase by phase. The TTR20 is the perfect tool for testing transformers for turns ratio, polarity and excitation current. It is primarily designed to fill a need for simple, push-totest transformer testing. The TTR20 allows the user familiar with transformer testing to obtain results without transformer configuration knowledge. The TTR20 is so small and easy to use that it can be utilized in fleet service. Its high accuracy delivers the results that users are looking to achieve. The significant features of the TTR20 include:
n Fewer buttons and no menus
Ordering Information
Cat. No. 550005B Single-phase, hand-crank Transformer Turns Ratio Test Set
$4,550.00
to 60 kV
n Automatic 1 minute timer
Ordering Information
Description
Semi-automatic Oil Test Set Spherical-type vessel Mushroom-type vessel Cylindrical-type vessel
Ordering Information
6111-356
List Price USD
$2,495.00
1-866-254-0962 www.megger.com/us
27
BITE 3
The BITE 3 determines the health of lead-acid cells up to 2000 Ah by taking measurements of the most important battery parameters. It measures cell impedance, cell voltage, intercell connection resistance and float and ripple currents. It also measures the harmonic content of the ripple current with its built-in spectrum analyzer. Its firmware is upgradeable through the internet. The BITE 3 comes complete with:
n ProActiv software (see box, left) n Canvas carrying case n RS232 modem cable n Dual point test leads (7 ft) n Line charger n Spare test lead tips
The BITE 3, combined with ProActiv, is extremely useful in determining the health of batteries and to plan their replacements in an orderly, non-emergency manner. The BITE 3 and ProActiv are the most powerful battery management system available today.
Ordering Information
$6,188.00
28
BITE2
Ordering Information
Cat. No. Description
BITE2 BITE2P
Battery Impedance Test Equipment Battery Impedance Test Equipment with built-in printer
$6,630.00 $7,410.00
1-866-254-0962 www.megger.com/us
29
NEW
continuous testing
n Automatic failure
at 9 V ac
n 100 Megohm insulation Cat. 230415 shown
shutdown
at 200 mA
n 20 mA leakage test at 40
and 110 V ac
n 4 kVA operational test at 110 V ac
Cat. No. Description AC High-pot Tester, 0 to 3 kV ac AC High-pot Tester, 0 to 4 kV ac AC/DC High-pot Tester 0 to 4 kV ac, 0 to 5 kV dc Tool and Appliance Tester Portable Appliance Tester
230315
230415 230425
235303
1000-740 (PAT320-US)
$5,195.00 $1,495.00
30
n Locates and traces cable energized with 50/60 Hz n Three-way swivel detector measures cable depth n Provides up to 150 hours of operation
under test
n Noise and stray signal rejection n Measures the height of up to
6 overhead cables
Cat. No. 656601 656902 Description Energized Cable Tracer Split-box Pipe and Cable Locator AccuTrace Cable Route Tracer Telecom Cable Height Meter, 35 ft (11 m) Power Cable Height Meter, 50 ft (15 m) Power Cable Height Meter, 75 ft (23 m)
656621
CHM2000 659600 659600E
1-866-254-0962 www.megger.com
31
Cable phasing meters to measure voltage and determine phase rotation of underground distribution systems
n
Phase sequence indicators for identifying the phase sequence and any faulty or open phase of energized lines
n
power source
n Housed in a rugged, insulated enclosure
Selection Guide for Three-phase Sequence Equipment Cat. No. Description Max Voltage Frequency (Hz) List Price USD
Motor and Phase Rotation Tester Motor and Phase Rotation Tester Cable Phasing Meter Phase Sequence Tester Phase Sequence Tester
600 V
50/60
$955.00
600 V 25/50/60/400 $1,050.00 30 kV 600 V 700 V 50/60 50/60 50/60 $2,290.00 $205.00 $500.00
32
air leak from 5 ft. away for safety, with only 10 psi pressure
n Directional pickup horn permits pinpointing
Ordering Information Ordering Information Cat. No. Unit Price USD Ultrasonic Leak and Corona Detector Tone Generator Contact Probe $1,460.00 $230.00 $205.00 Cat. No. Range 0.00025 to 0.020 in. 5 to 500 microns () Accuracy 10% or 0.1 mil. whichever is greater List Price USD $280.00
280282
569001
569001-7 569001-8
1-866-254-0962 www.megger.com/us
33
voltages
n Self-test ensures detector is working properly n Continuous monitoring with no ON/OFF switch n Fits most standard hot sticks n All ratings per ANSI C84.1, with conformance to IEC guidelines
not in use
high-voltage fuses
n Analog models (514500 series) are ideal for areas where an
insulated cable
n Handguards are standard on lower voltage models n
High voltage units are fitted with universal spline-fitting for attachment to a standard hot stick
Unit is fitted with universal spline-fitting for attachment to a standard hot stick Battery operated
34
Voltage Detectors
Phasing Testers
Piezo Verifiers
n Designed for use with both single pole and two-pole detectors n Consist of a Piezo generator of very small dimensions
*Pole Included
Insulation Resistance Tests The test forms supplied in PowerDB Lite work with the Megger MIT520/2 and MIT1020/2 insulation resistance test sets. Test results can either be downloaded from the instrument onboard memory or during the test with real time download. Earth/Ground Resistance Tests Two major challenges of earth ground resistance acceptance and maintenance testing are quickly addressed in this easy-to-use software package:
n Producing professional forms showing the test method utilized
Many methods that offer real advantages are not utilized because of their complexity.
1-866-254-0962 www.megger.com/us
35
36
5/10-kV Insulation Test Equipment ................ 2 1-kV Insulation Test Equipment ..................... 6 Additional Insulation Test Equipment ......... 11 Ground Resistance Test Equipment ............. 13 AC Loop Impedance Testers ......................... 17 Digital Low Resistance Ohmmeters ............. 18 Multimeters ................................................... 22 Clampmeters ................................................. 23 Time Domain Reflectometers ....................... 24 Datacom Test Equipment.............................. 26 Substation Test Equipment .......................... 27 Battery Impedance Test Equipment ............. 28 Special Maintenance Equipment ................. 30 Safety Test Equipment .................................. 34 Test and Measurement Software ................. 35 Cross Reference Guide .................................. 36
Valley Forge Corporate Center 2621 Van Buren Avenue Norristown, PA 19403-2329 USA Phone: 866-254-0962 Phone: 610-676-8500 Fax: 610-676-8610
WWW.MEGGER.COM/US
MEG-19961/18.5/M/2.2010
If you wish to email someone within Megger, all email addresses are: firstname.lastname@megger.com.
Distribution Sales Support
David Danner ...................................................................(480) 963-5494 Distributor Sales Mgr cell: (602) 684-8473 Rick Grim ...........................................................................(352) 799-6366 National Telecom Sales Mgr cell: (727) 560-2226 East Coast Electrical Distributor Mgr Jeff Hyde............................................................................(254) 897-3080 Regional Sales Mgr cell: (214) 212-9173 Rick DeBella .......................................................................(856) 232-1172 National Accounts Mgr cell: (609) 330-742
Megger Norristown Service & Repair SRO/Distribution Support email: VFCustomerSupport@megger.com Issue RA#s for Repair, Repair Order Status, Distribution Product Support (866) 254-0962 or (610) 676-8500 ext. 8578 Fax: (610) 676-8625 2621 Van Buren Ave., Norristown, PA 19403
Lisa Costantini, Customer Service Mgr ............................(610) Sue Coccia, Customer Service ...........................................(610) Esterfi Ramirez, Customer Service ...................................(610) Shannon Riddick, Customer Service .................................(610) Grace Williams, Customer Service ....................................(610) 676-8519 676-8518 676-8561 676-8541 676-8563
Marketing Depts. Norristown/Dallas Literature Requests, Tradeshows, ET Newsletter, Mail Lists, Direct Mailings, etc. Fax: (610) 676-8610
Peg Houck, Mgr, Norristown ............................................(610) 676-8536 Onnie Clem, Graphics, Dallas ...........................................(214) 331-7345