Professional Documents
Culture Documents
Konica Minolta
Konica Minolta
Konica Minolta
Error code C0500 and C0501 means Fixing unit's temperature abnormality. How to reset these codes? To reset Error codes C0500 and C0501, perform the following steps. 1-Turn the machine "OFF". 2-Press the "STOP" button on the basic panel. 3-Keep the button pressed and turn the machine "ON". 4-Do not release the button, until the machine warm up. 5-After few seconds Error code will remove and machine will reset.Basic menu will show no error on LCD screen.This means error code has been removed and photocopier machine is ready to use.
Best Solution
posted 2 years ago
chip_reset
y y
C0501 it is a trouble related with the Fusing Unit. Try to power it up with the STOP button pressed. If not, you may need to change your fusing unit. Was this helpful? Yes No
Add a comment
error code
error
code
trouble
machine error
Solve Your Konica Minolta bizhub 180 All-In-One Printer Problem Now!
Click here to get instant support from our best Experts
1 Solution
2 Solutions
1 Solution
1 Solution
Problem with the Konica Minolta bizhub 350 All-In-One Laser Printer
www.plastictoolingcorp.comWe make and sell toner dust control devices for printer & copier techs.
allmyapps.com/Free-Download Install 1500+ Free Software Download the PC App Store now!
Best Solution
posted 5 months ago
Crunchy Frog
y y
The error has to be manually reset. Here is what I found from the official procedure. Hope it works. How to clear a fuser error code (C0500, C0501, C0510, C0511, C0520, C0521). Solution To clear the fuser error code, perform the following after correcting the cause: 1. With power ON, open the front door and locate the small, rectangular hole below the imaging unit removal tool. Note: It is not in the same location as the models 7915/7920. 2. Insert a suitable object into the hole to actuate the reset switch .3. The code should clear and a message to close the front door should appear.