Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

Revised Frequency Specification When Using APU Controller and PowerPC in Virtex-4 FX Devices

XCN06022 (v1.0) November 13, 2006 For Your Information - FYI

Overview
The purpose of this notice is to inform Virtex-4 FX users of a revision to the PowerPC operating frequency for designs using the APU Controller.

Description
By design, the APU Controller operates at the same frequency as the PowerPC processor. Silicon characterization has shown a performance limitation when operating the APU Controller and PowerPC at the frequencies specified in the latest errata. When using the APU Controller, the operating frequency of the PowerPC must be reduced.

Products Affected
This change affects all Virtex-4 FX devices. Table 1: PowerPC Operating Frequency for Designs Using the APU Controller Virtex-4 FX PowerPC / APU Operating Frequencies Speed Grades -10 -11 -12 Original Frequency 275 MHz 325 MHz 350 MHz Revised Frequency 233 MHz 275 MHz 333 MHz

Response
No response is required. For additional information or questions, please contact Xilinx Technical Support. Important Notice: Xilinx Customer Notifications (PCN, PDN, and Quality Alerts) can be delivered via e-mail alerts sent by the MySupport Web site (http://www.xilinx.com/support/mysupport.htm). Register today and personalize your MyAlerts to include Customer Notifications. This change provides many benefits, including the ability to receive alerts for new and updated information about specific products, as well as alerts for other publications such as data sheets, errata, application notes, and so forth. For instructions on how to sign up, refer to Xilinx Answer Record 18683.

Revision History
The following table shows the revision history for this document. Date 11/13/06 Version 1.0 Initial release. Revision

2006 Xilinx, Inc. All rights reserved. All Xilinx trademarks, registered trademarks, patents, and disclaimers are as listed at http://www.xilinx.com/legal.htm. All other trademarks and registered trademarks are the property of their respective owners. All specifications are subject to change without notice.

XCN06022 (v1.0) November 13, 2006

www.xilinx.com

You might also like