Professional Documents
Culture Documents
Especificaciones Rodillo Sup D3G
Especificaciones Rodillo Sup D3G
Page 1 of 2
Cerrar SIS
Pantalla anterior
Producto: TRACK-TYPE TRACTOR Modelo: D3G TRACK-TYPE TRACTOR BYR Configuracin: D3G XL & D3G LGP Track-Type Tractors BYR00001-UP (MACHINE) POWERED BY 3046 Engine
Especificaciones
D3G, D4G and D5G Track-Type Tractors
Nmero de medio -RENR7312-01 Fecha de publicacin -01/03/2006 Fecha de actualizacin -03/03/2006 i01607023
https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/s... 15/10/2009
D3G XL & D3G LGP Track-Type Tractors BYR00001-UP (MACHINE) POWERED... Page 2 of 2
Illustration 1
g00832597
(1) At assembly, lubricate the seal surface of the collar with clean engine oil. (2) At assembly, rubber toric seals and all surfaces that contact the rubber toric seals must be clean and dry. Immediately before installation, put a thin layer of oil on the contact surfaces of the metal seal rings. The seal rings must be assembled square with the bore. Rubber toric seals must not be twisted. Do not allow rubber toric seals to bulge. (3) Assemble the face of the plate that is ground to the end of the shaft and bearing. (4) Torque for two bolts ... 47 9 Nm (35 7 lb ft) (5) Torque for five bolts ... 47 9 Nm (35 7 lb ft) (6) At assembly, lubricate the seal with a soap solution.
Copyright 1993 - 2009 Caterpillar Inc. Todos los derechos reservados. Red privada para licenciados del SIS.
https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/s... 15/10/2009