Professional Documents
Culture Documents
Synopsis
Synopsis
Synopsis
Water level indicator are ideal for dams,swimming pools and other such places where a specific water level should be maintain . This project is design for measuring and
controlling water level. A microcontroller and level sensor IC lm 1830 is used in this to control the and measure the water level.
The code is written in assembly language microcontroller runs with 11.05mhz crystal
Features : Easy to use. Stand alone device no computer or any other hardware required. Needs to be programmed only once. Easy to program.
Sr. no. 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18.
Component used 89c51 microcontroller (base + IC) Diode (4007, .7v) 10k resistance 4.7k resistance 470 ohms resistance Crystal oscillator (12Mhz frequency) buzzer Transformer (220v-909) L.E.D.s Ceramic Capacitor (30pf-33pf) Electrolytic capacitor (100 microfarad,470 microfarad) Seven segment(LT542) Voltage regulator (7805)(+5v) 2-Pin connector 5-pin connector 2- pin switches Cellotape(for electrical use) Supply wire
In this project we try to give the same prototype for this type of water
level indicator. For this AT 89C51 microcontroller and DS 1850 IC has een used. LM 1850 is a water level sensor chip which isused to sense the level of the water. When water level exceeds a specific limit buzzer rings.
PROGRAMMING: