Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

FIELDWORK # 18 Title: PLANE TABLE AND ALIDADE Objective: To construct a map using plane table and alidade.

This is a group activity Site: UST Campus Instruments: 1 Plant Table 1Alidade 1Steel tape Marking Pins/Markers 2 Range Poles Procedure: 1. Set up and level the plane table to any convenient point on the ground. Be sure that all points to be sighted should be visible from the location of the plane table. 2. Position the tracing paper on the table. 3. Establish the reference meridian on the paper 4. Sight the points needed and draw the corresponding line of sight on each point. 5. Plot the distance measured on each point along the line of sight.

A E

D B C

FW #18: PLANE TABLE AND ALIDADE

Page 1

FIELDWORK # 18 Title: Group No.: _________________________________ Time Started: _______________________________ Time Finished: ______________________________ Actual Site: _________________________________ GROUP MEMBERS: Yr & Sec: ___________________________________ Date Performed: _____________________________ Date Submitted: _____________________________ Weather Condition: __________________________ DUTY/IES:

DATA & RESULTS:

DRAWINGS:

SOURCE OF ERRORS:

REMARKS:

FW #18: PLANE TABLE AND ALIDADE

Page 2

You might also like