When the lower voltage range is chosen, the two supplies are connected in parallel and the centre tap ter:minal has an output i:mpedance of 5kQ. The output voltage is set to the required ievel by the voltage li:mit control which is calibrated to +-3%. Greater accuracy may be obtained by setting the output voltage against the internal :meter or an external digital volt:meter.
When the lower voltage range is chosen, the two supplies are connected in parallel and the centre tap ter:minal has an output i:mpedance of 5kQ. The output voltage is set to the required ievel by the voltage li:mit control which is calibrated to +-3%. Greater accuracy may be obtained by setting the output voltage against the internal :meter or an external digital volt:meter.
When the lower voltage range is chosen, the two supplies are connected in parallel and the centre tap ter:minal has an output i:mpedance of 5kQ. The output voltage is set to the required ievel by the voltage li:mit control which is calibrated to +-3%. Greater accuracy may be obtained by setting the output voltage against the internal :meter or an external digital volt:meter.
When the lower voltage range is chosen, the two supplies are connected in parallel and the centre tap ter:minal has an output i:mpedance of 5kQ. The output voltage is set to the required ievel by the voltage li:mit control which is calibrated to +-3%. Greater accuracy may be obtained by setting the output voltage against the internal :meter or an external digital volt:meter.