Power Conditioner: HOME Power Conditioner UPS Power Conditioner Devices Smart On-Line UPS

You might also like

Download as doc, pdf, or txt
Download as doc, pdf, or txt
You are on page 1of 4

Power Conditioner Automatic Voltage Regulator Automatic Voltage Stabilizer UPS Power Conditioner Devices Puncture / Insulation Tester

(Hi-Pot) Contact Us Site Map

Company Profile

Even

HOME > Power Conditioner > UPS Power Conditioner Devices > Smart On-Line UPS

Quantity:

Smart ON-LINE UPS :


High Frequency operation and high efficiency

RS232 interface and SNMP solutions

Intelligent short circuit protection

Long back-up time option

LCD & LED display

Cold start (DC power on)

IGBT inverter design

System Block Diagram :

Technical Specifications :
Model General Capacity NS-242 NS-302 NS-352 2.4KVA 3KVA 3.5KVA NS-602 NS-802 NS-103 6KVA 8KVA 5.6KW 10KVA 7KW NS-123 12KVA 8.4KW NS-153 15KVA 10.5KW NS-203 20KVA 14KW

1.68KW 2.1KW

2.45KW 4.2KW

Voltage

100V, 110V, 115V, 120V, 200V, 220V, 230V, 240V 15%

190V, 208V, 220V, 230V, 240V, 380V 15%

Input

Frequency

50 or 60Hz 15% 1 2 + G or 3 3 + G or 3 4 +G

Phase

12+G

Output

Voltage Frequencystability Voltage Regulation Transient Response THD

100V, 110V, 115V, 120V, or 200V, 220V, 230V, 240V

0.5% (Free running)

1%

1% ( 3% with ISO Transformer)

5% (100% load change)

3% (Linear Load)

Wave Form Overload Capacity Short Circuit Crest Factor Transfer Time Efficiency Battery Type Battery Voltage Battery Back up Time (Full) Recharge Time Interface Communication

Sine-Wave

105% ~ 150% for 30 seconds, > 150% for 10 cycle

Auto cut off output no transferring to bypass 3:1 Zero-cross transfer, <2ms. UPS to bypass or reverse 83% Lead acid maintenance-free battery 192V

12 mins

8 mins

6 mins

6 mins

5 mins

5 mins

4 mins

9 mins

5 mins

5 hours to 90%

8 hours to 90%

RS232 (option) / Dry Contact or AS 400 (option) Line (green), inverter (green), bypass (orange), battery (green), fault (red), overload (orange), over charge (orange), battery level (5 LED indicators) System operating status display, input / output voltage, frequency, output loading %, battery voltage, temperature &deg;C

LED Indicator LCD

Utility Power Fail Audible Alarm Low Battery Fault, Over Charge Overload Dimension Appearance W x D x H (mm) Weight (kg) Audible Noise Operating Temperature Humidity 80

Beeping every 4 seconds approx, 2minutes auto alarm reset

Rapid beeping every second as battery approaches final discharge

Continuous

Beeping 2 seconds on every other second

235 x 585 x 620

265 x 634 x 735

353 x 930 x 1017

80

88 < 50 db

130

140

222/282 234/303 320/410 336/436 <60 db

Environment

0 C to 40 C

0% ~ 90% (non-condensing)

Design by G.T. Net Info. Co., Ltd. Taiwan Products, B2BChinaSources, B2BManuf

You might also like