Professional Documents
Culture Documents
Agilent CNY17-x Phototransistor Optocoupler High Collector-Emitter Voltage Type
Agilent CNY17-x Phototransistor Optocoupler High Collector-Emitter Voltage Type
Agilent CNY17-x Phototransistor Optocoupler High Collector-Emitter Voltage Type
Data Sheet
Description The CNY17 contains a light emitting diode optically coupled to a phototransistor. It is packaged in a 6-pin DIP package and available in widelead spacing option and lead bend SMD option. Collector-emitter voltage is above 70 V. Response time, tr, is typically 5 s and minimum CTR is 40% at input current of 10 mA.
Ordering Information Specify part number followed by Option Number (if desired). CNY17-3-XXXE Lead Free Option Number 000 = No Options 060 = IEC/EN/DIN EN 60747-5-2 Option W00 = 0.4" Lead Spacing Option 300 = Lead Bend SMD Option 500 = Tape and Reel Packaging Option
Functional Diagram
PIN NO. AND INTERNAL CONNECTION DIAGRAM 6 5 4
ANODE 1 + IF 6 BASE
Features High collector-emitter voltage (VCEO = 70 V) High input-output isolation voltage (Viso = 5000 Vrms) Current Transfer Ratio (CTR: min. 40% at IF = 10 mA, VCE = 5 V) Response time (tr: typ., 5 s at VCC = 10 V, IC = 2 mA, RL = 100 ) Dual-in-line package UL approved CSA approved IEC/EN/DIN EN 60747-5-2 approved Options available: Leads with 0.4" (10.16 mm) spacing (W00) Leads bends for surface mounting (300) Tape and reel for SMD (500) IEC/EN/DIN EN 60747-5-2 approvals (060) Applications System appliances, measuring instruments Signal transmission between circuits of different potentials and impedances Feedback circuit in power supply
Schematic
VF CATHODE 2 IC 5 COLLECTOR
1 1. ANODE 2. CATHODE 3. NC
EMITTER
CAUTION: It is advised that normal static precautions be taken in handling and assembly of this component to prevent damage and/or degradation which may be induced by ESD.
LEAD FREE
A CNY17 Y Y WW
3.5 0.5 (0.138) 6.5 0.5 (0.256) 2.8 0.5 (0.110) 3.3 0.5 (0.13) 0.5 0.1 (0.02) 0.5 TYP. (0.02)
CNY17-X-060E
MODEL NO. *2 7.3 0.5 (0.287) 7.62 0.3 (0.3)
LEAD FREE
A CNY17- V
Y Y WW
3.5 0.5 (0.138) 6.5 0.5 (0.256) 2.8 0.5 (0.110) 3.3 0.5 (0.13) 0.5 0.1 (0.02) 0.5 TYP. (0.02)
CNY17-X-W00E
7.3 0.5 (0.287) 7.62 0.3 (0.3)
MODEL NO. *2
LEAD FREE
A CNY17 Y Y WW
3.5 0.5 (0.138) 6.5 0.5 (0.256) 2.8 0.5 (0.110) 0.5 0.1 (0.02) 2.3 0.5 (0.09) 0.26 (0.010) 10.16 0.5 (0.4) 6.9 0.5 (0.272)
CNY17-X-300E
MODEL NO. *2 7.3 0.5 (0.287) 7.62 0.3 (0.3) 0.35 +0.15/-0.10 (0.014)
LEAD FREE
A CNY17 Y Y WW
3.5 0.5 (0.138) 6.5 0.5 (0.256) 1.2 0.1 (0.047) 2.54 0.25 (0.1) 0.35 0.25 (0.014) 1.0 0.25 (0.039) 10.16 0.3 (0.4)
Temperature (C)
Solder Reflow Temperature Profile 1) One-time soldering reflow is recommended within the condition of temperature and time profile shown at right. 2) When using another soldering method such as infrared ray lamp, the temperature may rise partially in the mold of the device. Keep the temperature on the package of the device within the condition of (1) above.
150C 60 sec
Absolute Maximum Ratings Storage Temperature, TS Operating Temperature, TA Lead Solder Temperature, max. (1.6 mm below seating plane) Average Forward Current, IF Reverse Input Voltage, VR Input Power Dissipation, PI Collector Current, IC Collector-Emitter Voltage, VCEO Emitter-Collector Voltage, VECO Collector-Base Voltage, VCBO Collector Power Dissipation Total Power Dissipation Isolation Voltage, Viso (AC for 1 minute, R.H. = 40 ~ 60%) 55C to +150C 55C to +100C 260C for 10 s 60 mA 6V 100 mW 150 mA 70 V 6V 70 V 150 mW 250 mW 5000 Vrms
Electrical Specifications (TA = 25C) Parameter Forward Voltage Reverse Current Terminal Capacitance Collector Dark Current Collector-Emitter Breakdown Voltage Emitter-Collector Breakdown Voltage Collector-Base Breakdown Voltage Collector Current *Current Transfer Ratio CNY17-1 CNY17-2 CNY17-3 CNY17-4 Collector-Emitter Saturation Voltage Response Time (Rise) Response Time (Fall) Isolation Resistance Floating Capacitance Symbol VF IR Ct ICEO BVCEO BVECO BVCBO IC CTR Min. 70 6 70 4 40 63 100 160 1 x 1011 Typ. 1.4 5 5 Max. 1.7 10 100 50 32 80 125 200 320 0.3 10 10 2 Units V A pF nA V V V mA % Test Conditions IF = 60 mA VR = 6 V V = 0, f = 1 MHz VCE = 10 V IC = 0.1 mA, IF = 0 IE = 10 A, IF = 0 IC = 0.1 mA, IF = 0 IF = 10 mA VCE = 5 V
VCE(sat) tr tf Riso Cf
V s s pF
* CTR =
IC x 100% IF
80
IF FORWARD CURRENT mA
200
60
160 150
40
100
20
50
0 -55
-25
25
50
75
100 125
0 -55
-25
25
50
75
100 125
TA AMBIENT TEMPERATURE C
TA AMBIENT TEMPERATURE C
500
IF FORWARD CURRENT mA
45
IC COLLECTOR CURRENT mA
VCE = 5 V TA = 25C
TA = 75C 200 100 50 20 10 5 2 1 0 0.5 1.0 1.5 2.0 2.5 3.0 TA = 50C TA = 25C TA = 0C TA = -25C
40 IF = 30 mA 35 30 25 20 15 10 5 0 0 2 IF = 10 mA IF = 5 mA IF = 2 mA 4 6 IF = 20 mA
TA = 25C PC (MAX.)
RBE =
100 k 500 k 2 5 10 20 50
10
VF FORWARD VOLTAGE V
IF FORWARD CURRENT mA
150
IF = 10 mA VCE = 5 V
IF = 10 mA IC = 2.5 mA
10-6 10-7 10-8 10-9 10-10 10-11 10-12 10-13 -30 0 20 40 60 80 100 VCE = 10 V
100
50
0 -55
-25
25
50
75
100
-25
25
50
75
100
TA AMBIENT TEMPERATURE C
TA AMBIENT TEMPERATURE C
TA AMBIENT TEMPERATURE C
10
RESPONSE TIME s
IF = 10 mA VCC = 5 V TA = 25C tr tf
6 TA = 25C 5 4 3 2 1 0 IC = 0.5 mA IC = 1 mA IC = 2 mA IC = 3 mA IC = 5 mA
0.5 0.02
0.05
0.1
0.2
0.5
2.5
5.0
7.5
10.0
12.5
RL LOAD RESISTANCE k
IF FORWARD CURRENT mA
RD INPUT
RL OUTPUT
RD
RL OUTPUT
INPUT
OUTPUT
10%
90%
td tr
ts tf
www.agilent.com/semiconductors
For product information and a complete list of distributors, please go to our web site. For technical assistance call: Americas/Canada: +1 (800) 235-0312 or (916) 788-6763 Europe: +49 (0) 6441 92460 China: 10800 650 0017 Hong Kong: (+65) 6756 2394 India, Australia, New Zealand: (+65) 6755 1939 Japan: (+81 3) 3335-8152 (Domestic/International), or 0120-61-1280 (Domestic Only) Korea: (+65) 6755 1989 Singapore, Malaysia, Vietnam, Thailand, Philippines, Indonesia: (+65) 6755 2044 Taiwan: (+65) 6755 1843 Data subject to change. Copyright 2004 Agilent Technologies, Inc. Obsoletes 5989-0290EN October 27, 2004 5989-1736EN
This datasheet has been download from: www.datasheetcatalog.com Datasheets for electronics components.